Good Parts Ltd has grown and relocated!

Following the Christchurch earthquakes, and the purchase of stock from two remaining motorcycle dismantlers in Christchurch, we have moved out to a rural property near Rangiora in North Canterbury. Good Parts is still a one man operation, with a very supportive wife, two small mischievous dogs, and a couple of workshop cats to keep the mice at bay. We have certainly grown, but continue to remain friendly and helpful to all those looking for motorcycle parts. Much of the stock purchased from other dismantlers is from older models from the 70’s and 80’s. In some cases it may only be one or two parts from a particular model and too many to list in total, so let us know what your looking for and we may just have it in stock.

2013-10-28 16.17.33

The business has been operating since 2007 and is now operating on a fulltime basis.

We ship pretty much anywhere, with parts having been supplied to customers in far away places such as Poland, Latvia and the Maldives.

41 responses to “About

  • David Fannin

    I have a 2001 ST4s Ducati and have recently obtained a part from another supplier but I think he may have sourced it from you. Just wondering if you can source Ducati parts,as I may as well deal with you and hopefully get things a little bit cheaper.

  • Phil Norden

    Hi there, I after a Yoshimura for my GSXR750 4 bolt mount but I could change that to fit another muffler.Do you have any or now where to get 1 ? Cheers phil

    • goodparts

      Hi Phil. Sorry I cant help with that one. Would be worth trying GP motorcycle wreckers in Tauranga or Sweet Street in Hastings. Bike Busters in Hamilton may be another option. Cheers Simon

  • Dave Lonsdale

    Hi Simon, I’m looking for Yamaha RZ 250/350 bottom end and don’t need crank. Cheers Dave

  • Phil Wright

    Hi looking for a project bike and scrolling through your listings a few of the Suzuki and Honda’s cought my eye, but as you say there might not be much left of these bikes. Any chance to pop in and have a chat and a look at what you have.

    Regards Phil

    • goodparts

      Hi Phil. My business is mainly internet based with viewing of specific parts by appointment. My customers generally email me initially and I will then provide photos of parts if I have anything that may suit their requirements. If they then wish to view specific parts, I will get them out into my workshop for viewing at an agreed time. I am not set up for customers to browse so to speak, but also I only sell parts and do not sell complete or semi-complete bikes, so would not be able to help with regard to a project bike. Your best option is to keep an eye out for something suitable on Trademe. Cheers Simon

  • Hamish McMurtrie

    Hi there, I have recently purchased a 1985 Suzuki gsxr 750f and require various parts for it, mainly body panels and was wondering if you had anything in stock. thanks.

  • kellyned

    Can you supply a tank for a 2003 Suzuki VL800?

  • carl

    any buell parts 06 xb12r 021533900carl

  • Andrew

    Good Day I am looking for a caliper set for a 1987 vfr 400 nc 24 2 fronts and the rear as well.

  • Adam Berry

    Hey team… Just picked up a 250 Suzuki intruder with a seized motor. Haven’t torn it apart yet but do you have a motor for one if I need it and what’s the price look like? Looking into options now whether it’s worth a rebuild or just replacing. Shipping would only be to wanaka area.


    • goodparts

      Hi Adam.
      I don’t currently have a VL250 engine in stock, but I may be able to purchase a damaged 2015 VL250 and could supply the bare engine (without carb and starter) at $800 including shipping to Wanaka. I’m away at the moment so wouldn’t be able to supply the engine until after Easter. If you are interested, please email me at goodpartsnz@gmail.com ASAP and I will then see if I can purchase the damaged bike. Cheers Simon

  • Tricia

    got a side stand that will fit a 1988 Honda Bros 400?

  • Nik

    Hi ,after a semi sealed beam headlight slightly bigger than 7inch ( bosch? ) for s1 lightning, maybe same as Ducati? Thanks Nik. Ps also a side cover for a ts200r .

  • Leslie

    I Have a 1993 BMW k1100 that i want to wreck, would you be interested

  • Paul Dobson Blenheim 0272495887

    Hello. I was on the trade me wrecking bikes site on the weekend and you had a Suzuki GSX 400 Impulse listed. Its the 4 cylinder water cooled model. I have one that looks identical. Do you still have it and what parts are avalable still. Do you no what a bike like that in going condition would be wourth as i have not been able to find one for sale for a number of years. Hope you can help. Regards Paul.

    • goodparts

      Hi Paul. I have dismantled a few of these, although many parts have sold. 10 years ago they were very easy to pick up and the motors were popular for of-froad buggies etc, but not so many about now. They do come up on Trademe occasionally, but haven’t seen any for a while now. I couldn’t put a price on one sorry, although they don’t really demand a high price. If you are looking for parts, please email me at goodpartsnz@gmail.com Cheers Simon

  • MIke

    Good morning. I have a 2004 Triumph America,that I want to replace the mufflers on.(It’s a long story, but the exhausts are promised to someone else!) Would you have some suitable (cheap ) alternatives I can put on until I can save for some decent ones ?

    Regards, MIke

  • Paul Terpstra

    hi there, I have a 1997 BMW R1100GS & am looking for headlight housing part # 63122313316 or whole headlight assembly. Also RH front brake master cylinder assembly, part # 32722352165, & dashboard mount.
    cheers, Paul

  • Tony eastmond

    14inch Honda wheels do you have any thanks

  • Troy wheble

    Hi just wondering if u do tyres as I am looking for front 110/90-18 ,rear 170/80-15 cheers

  • Dan

    Just after a FJ1200 front guard,dash clear screen, and exhaust pipes? thanks Dan

  • Aidan Russell

    Hey, just wondering if u may have a gear shifter for my 1989 MC18 NSR250?
    Cheers Aidan

  • Phil Davies

    Hi Simon
    Was Wondering if you have a fuel cap for a 1989 GPZ900R
    Cheers Phil

  • Kevin

    Do you have a pair of forks for a 1998 ducati monster M900?

Leave a Reply to goodparts Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: