Below is a list of Honda motorcycle models currently in stock. Some models may have all the motorcycle parts available, some may only have a few parts left.
Email us on goodpartsnz(at)gmail(dot)com for any enquiries. We ship anywhere in New Zealand, Australia and other international destinations
Honda Motorcycles
| Make | Model | Year |
| Honda | CB400R Aero | 1987 |
| Honda | CBR600 | 1989 |
| Honda | CB650 | 1980 |
| Honda | CB900F | 1980-1983 |
| Honda | VF400F | 1984 |
| Honda | Rebel 250 | 1990 |
| Honda | VFR400 | 1987 |
| Honda | VT250FD | 1985 |
| Honda | VT250FE | 1985 |
| Honda | VF750F | 1984 |
| Honda | CBX250RS | 1985 |
| Honda | CBX250F | 1985 |
| Honda | CB550K | 1976 |
| Honda | GL1000 | 1975 |
| Honda | CX500C | 1984 |
| Honda | CB400T | 1978 |
| Honda | VF400F | 1986 |
| Honda | CBR250 MC17 | 1988 |
| Honda | CBR400RR MC23 | 1988 |
| Honda | CBR1000 | 1989 |
| Honda | Jade 250 | 1990 |
| Honda | CBR250R MC19 | 1989 |
| Honda | CBR250RR MC22 | 1990 |
| Honda | NS250R | 1986 |
| Honda | VF1000F | 1984 |
| Honda | CBX550 Integra | 1986 |
| Honda | CBX650E | 1984 |
| Honda | CB400FII | 1994 |
| Honda | VT1100 Shadow | 1994 |
| Honda | CBR900 Fireblade SC33 | 1999 |
| Honda | CB750F | 1981 |
| Honda | GB500 | 1986 |
| Honda | NSR250 MC18 | 1989 |
| Honda | CX500C | 1981 |
| Honda | GL500 | 1981 |
| Honda | VF750 Sabre | 1983 |
| Honda | VTR250 | 1989 |
| Honda | CB650P | 1980 |
| Honda | VFR750 | 1986 |
| Honda | VT250F | 1987 |
| Honda | CBR400R Aero | 1987 |
| Honda | CBF250 Hornet | 1996 |
| Honda | CBX750 | 1987 |
| Honda | FT400 | 1987 |
| Honda | MVX250 | 1987 |
| Honda | VF750 Sabre | 1984 |
| Honda | CBX250RS | 1987 |
| Honda | CBR1000FN | 1992 |
| Honda | GB400 | 1988 |
| Honda | CM400C | 1983 |
| Honda | VT250 Spada | 1989 |
| Honda | VFR750 | 1994 |
| Honda | VFR1000 | 1997 |
| Honda | CBR1100 Blackbird | 1997 |
| Honda | CD175 | 1971 |
| Honda | CB50 | 1987 |
| Honda | XL350 | 1975 |
| Honda | VTX400 Bros | 1988 |
| Honda | VT500 | 1987 |
| Honda | CB400N | 1978 |
| Honda | CB250N | 1979 |
| Honda | CBR1100XX Blackbird | 2002 |
| Honda | CBR250 MC14 | 1986 |
| Honda | VFR700 | 1988 |
| Honda | VFR750 | 1990 |
| Honda | NS400R | 1986 |
| Honda | CB200 | 1974 |
| Honda | VTZ250 | 1989 |
| Honda | GL1200 Aspencade | 1986 |
| Honda | CBR1000RR | 2013 |
| Honda | VT750 Shadow | 1997 |
| Honda | CBR300 | 2015 |
| Honda | CBR750 Hurricane | 1987 |
| Honda | VF400 | 1997 |
| Honda | CBR600 FM | 1991 |
| Honda | CBR750 Hurricane | 1987 |
| Honda | Transalp 600 | 1987 |
| Honda | VT750 Shadow | 2004 |
| Honda | VTX1300 | 2006 |
| Honda | VTR1000 | 2002 |
| Honda | CBR600FX | 2000 |
| Honda | CB500FA | 2018 |
| Honda | 250 Rebel | 1992 |
Good Parts Motorcycle Dismantlers 
January 13th, 2011 at 5:52 pm
Hello, after cbr250 mc17 or mc19 piston and rod for a restore. regards
January 13th, 2011 at 10:27 pm
Hi Peter,
Not sure if I can help currently, but will get back to you shortly once I have a good look at some parts I recently purchased. Cheers Simon
March 1st, 2021 at 7:37 am
Hi, I am looking fo a replacement rear rim
For my 1998 xl600v transalp.
17 x 2.50 32 spoke. Or a wheel even.
Can you help?
October 20th, 2022 at 9:30 pm
Hey, I’m after a headlight for a 2007 vt750c Honda Shadow. Or any that will fit the Motorcycle.
Cheers, Benjamin
October 21st, 2022 at 9:07 am
Sorry I cant help with that one.
February 6th, 2011 at 6:59 pm
Hi, I have a CBR1000FK. Im after a seat catch, and do they make a speedo just in KM/H for the FK 1989 model?
February 9th, 2011 at 10:31 pm
Hi.sorry cant help with that one currently as i only have a handful of parts for that model. Cheers Simon
June 5th, 2022 at 9:19 am
Have you got full wiring harness and voltage regulator for the gb400 (and is the gb400 a mk 2 with the nose fairing with visor)? Also have you got the gb500 engine and transmission available
June 5th, 2022 at 11:07 am
Hi. I have a rectifier from a GB400 in stock and a wiring loom from the GB500. I think the 400/500 parts will be interchangeable. Sorry no engines in stock. You can email me at goodpartsnz@gmail.com for more details including photos. Cheers.
February 10th, 2011 at 6:55 pm
would you have a seat for a Honda CX400 custom?
February 10th, 2011 at 9:23 pm
Sorry no, cant help with that one currently. Cheers
April 7th, 2014 at 3:40 pm
I have a seat for cx400 custo that I’ll sell cheapm…..I’m looking for carbs?
April 7th, 2014 at 7:56 pm
Sorry cant help with that one
March 3rd, 2011 at 12:18 am
Hey. Wow it is great to find your site.
I have a an 80’s Honda vf400f.
How much for a set of mirrior’s?
Oh and how much for an engine if you have any?
Mine has done over 60,000 kms now. so if you have any vf400f engines with lower kms I would be interested.
Thanks Chris.B
March 3rd, 2011 at 10:06 pm
Hi Chris,
thanks for your enquiry. I have dismantled a VF400F but sorry I dont have any mirrors currently.
Because the VF400 has standard type mirrors you should be able to get a pair of cheap after market mirrors that would siut the bike. Try a m/c accessory shop or look on Trademe, as there are several people selling imported aftermarket mirrors.
I have a VF400 engines that was part of a large parts lot I purchased recently, but unfortunately I have no idea of the mileage the engine has done.
Sorry I couldnt help you this time, but please dont hesitate to contact me again if you require parts.
Cheers
Simon Gooding
Good Parts Ltd
Motorcycle Dismantlers
Christchurch
March 3rd, 2011 at 11:12 pm
Hey simon thanks alot, you are very helpfull.
What condition is the engine in and how much for it?
I will definatly contact you again for some parts!
Cheers Chris.B
April 11th, 2011 at 4:34 pm
Hey it’s not listed on your list so you probably don’t have it, but I’m after a starter motor for a Honda NX250. Honda part #31200-KW3-018
April 11th, 2011 at 8:52 pm
Hi. Sorry cant help with that one and they wont be a very common model. Cheers
March 10th, 2023 at 11:47 am
Hi do you have xl250r parts
March 10th, 2023 at 12:22 pm
Sorry I can’t help with that one Les, and I don’t deal in off road model parts. Cheers Simon
May 15th, 2011 at 4:50 pm
Hi i am after a righthand side cover for a 1986vf400f and also a cover that goes over the fuses.regards Shay.ph 930 1500 or 021 08128471.i live in christchurh so if you have these items could you please advise me of shipping costs.thankyou
May 15th, 2011 at 11:14 pm
Hi Shay,
Yes I have a RH sidecover for your VF400 and its even still in the original red and white colour scheme. I’ll send you an email with a photo shortly. Cheers Simon
May 27th, 2011 at 6:45 pm
hi there i am looking for a fairing set for a 1988 cbr600f huricane as unfortunatly i came off mine
May 27th, 2011 at 9:56 pm
Hi Gordon,
sorry cant help with those as I have sold all fairings from the CBR600 I have dismantled. Cheers Simon
June 19th, 2011 at 9:56 pm
hay bro im currently looking for full fairing set for a mc 19. 2 front sides and front cowl are really needed thanks for your time
June 19th, 2011 at 10:03 pm
Hi Bronson.
These are hard to come by, but I have just got a set in. Will email you direct with photos etc. Cheers Simon
July 5th, 2011 at 12:45 pm
hey im looking for a frame for a honda vt 250 around 84, round tube frame not square. got anything in stock?
July 5th, 2011 at 7:59 pm
Hi. Sorry cant help with a frame. I have dismantled a VT250FD but the frame is long gone. Probably hard to find at a dismantlers these days. Keep an eye on Trademe for a suitable donor bike. Cheers
July 18th, 2011 at 12:29 pm
Hi I have a VTR1000F (2000-1) do you have any engines as mines kicked the bucket.
Thanks
Sam
July 19th, 2011 at 12:45 am
Hi. Sorry but haven’t dismantles a VTR1000 as yet.
July 18th, 2011 at 1:51 pm
hi, lOOKING FOR A GOOD USED IGNITION BARRELL /KEYS ASSEMBLY FOR A CBR1000 1990
July 19th, 2011 at 12:51 am
Hi. I am currently overseas and won’t be back until August 1st. I don’t have an ignition switch from a CBR1000, but it’s possible one from another model may fit. Let me know if your still looking for something after I return. You can email me direct on goodpartsnz@gmail.com. Cheers Simon
October 30th, 2011 at 9:35 am
Looking for complete front brake assy for VF500F (same as 400F I believe) Need Lever, master assy, line, calipers & pads. Coming to Christchurch next weekend. Any joy?
October 30th, 2011 at 8:06 pm
Hi Barry.
The VF500 has a completely different fronrt end and brake system to the VF400, as the VF400 had Honda’s inboard disc set up. However, from what I can see the VF500 used the same wheels and front brakes as several other models, so I may be able to help with at least some of the parts you require. I will email you directly. Cheers Simon
November 5th, 2011 at 8:10 am
Looking for left and right air boxes as well as digital clocks for a vf 750 sabre . willie 0825537223
November 5th, 2011 at 4:37 pm
Hi Willie, yes I think I have those parts in stock as I have recently got another Sabre in . I will email you directly and we can go from there. Cheers Simon
November 12th, 2011 at 3:49 pm
do you have both sidecovers for a 79 cb900f
November 13th, 2011 at 8:29 pm
Hi Nigel. Sorry but all my CB750/900 disecovers are sold currently. Cheers Simon
November 19th, 2011 at 8:23 am
Would you have a speedo or cluster and right hand side cover for 1984 vf750f,Thanks John.
November 20th, 2011 at 7:23 pm
Hi John,
thanks for your enquiry and I think I can help with both. Will email you directly. Cheers Simon
December 6th, 2011 at 8:14 pm
i have a 1982 VF750 sabre, would u have a cdi unit 4 it, cheers neil
December 6th, 2011 at 9:42 pm
Hi Neil. The Sabre has two ignitor units. I have both in stock at $80 each, so its just a matter of sorting out which one you need. Email me at goodpartsnz@gmail.com and if possible send me a photo of the one that needs replacing. Cheers Simon
December 13th, 2011 at 12:13 am
I have emailed u & am not sure whether it has gone through or not. It is the left hand one i need part number TID12-04 MBO 203 (hitachi) Text me ur address to 027 221 6790 or email me @ mistynz1957@yahoo.com
December 14th, 2011 at 11:17 pm
Didnt get your email Neil, but will email you tonight
Cheers
Simon
January 14th, 2012 at 1:19 pm
Hi, I am after the following parts for a Honda Hornet cb250f 1996,
Complete tail cowl,
Rear grab rail,
Tail light,
Right hand handle bar switch block, starter side,
Complete instrument cluster.
Many thanks
Paul
January 14th, 2012 at 5:36 pm
Hi Paul,
I can supply a tail cowl,pillion grab rail, and taillight. I will email you directly with details. Cheers Simon
January 16th, 2012 at 10:11 pm
Hi Simon
I have a 85VF750F I am fixing up. Do you have the seat release key lock mechanism and key to go with it. Also left and right hand side plastics, front screen, and the black instrument surround – thats all…for now!
January 16th, 2012 at 10:30 pm
Hi Guy,
I should have at least some of these parts available, and will email you directly. Cheres Simon
January 19th, 2012 at 11:32 am
Hi, do you have the cbr400r aero side mirrors? Thanks 🙂
January 19th, 2012 at 3:44 pm
Hi Giulio,
sorry cant help with those. Cheers Simon
January 22nd, 2012 at 9:52 pm
Hi, after Honda lead NH80ss body panels. Can you help or know a good supply of scooter parts.
January 22nd, 2012 at 9:58 pm
HI Wayne,
sorry cant help with those. I dont generaly deal in scooter parts, although I do have a few parts in stock that came as a part of a large parts lot that I purchased from another dismantler. I dont know of any scooter dismantlers locally, but check out Trademe, as there are often people with scooter parts available there. Cheers Simon
February 20th, 2012 at 6:59 pm
I have a cx500 1984. Do you have a CDI box for it and if so how much plus shipping to Auckland please. Danny
February 20th, 2012 at 7:30 pm
Hi Danny. I have CDI units for several difefrent CX500 models (they are different) so with a bit of luck I will have what you require. Please email me directly at goodpartsnz@gmail.com and if possible attach a photo of your current CDI unit. Cheers Simon
February 26th, 2012 at 6:49 pm
Hi I’m after a price and availability on some of the vt1100 shadow’s parts.
Headlight cover
R/H front brake unit complete (incl. brake cable)
Rear brake light & indicators unit complete.
Muffler and headers complete.
Exhaust chrome covers. (set)
Cheers,
Marcus
February 27th, 2012 at 9:05 pm
Hi Marcus.
Many parts from this bike have already sold and I think the only thing IO have from your list is the tail light unti. This is in good order and available at $60. If your interested, email me at goodpartsnz@gmail.com I can email you a photo. Cheers Simon
March 25th, 2012 at 10:48 am
Hi,
I’m after a headlight unit for the Honda CBF250. It doesn’t matter much to me if it is the original CBF250 one or not, as long as it fits. Is there anything you can do for me?
April 25th, 2012 at 8:09 pm
Hi,
Im looking for a honda cb 650 luxary custom fuel tap, do you know where i could sorce one from?
Cheers Eugene
July 27th, 2012 at 11:44 pm
Hi There
Do you have the front and rear seat in good condition for a 1988 cbr250r mc19? also any side tri colour fairings in good condition?
July 28th, 2012 at 12:04 am
Sorry cant help with those currently.
August 21st, 2012 at 9:02 pm
hi there have u got a regulator rectifier 4 a 1982 Vf750 sabre, cheers neil
October 2nd, 2012 at 8:52 pm
Do you have spark leads for a 1990 cbr250r?
October 2nd, 2012 at 9:32 pm
Hi Luke. I cant supply leads on their own, but can supply a pair of coils complete with leads and plug caps in good order, at $120/pair. You can email me directoly at goodpartsnz@gmail.com for more details if your interested. Cheers Simon
October 13th, 2012 at 5:39 pm
Hi, I am looking for coils and possibly leads if there are available for cbr250rr ’97 MC22? Cheers
October 13th, 2012 at 9:24 pm
Hi Ryan.
I can supply a pair of coils complete with leads and plug caps at $120. You can email me directly at goodpartsnz@gmail.com
Cheers Simon
October 22nd, 2012 at 5:07 pm
hey there was hopping you might have a fuel tap for cbr250rr mc22
October 22nd, 2012 at 6:54 pm
Hi Alan. Sorry all sold currently. Cheers Simon
November 11th, 2012 at 3:24 pm
Hi, I am looking for the left hand side switch block for a Honda CBR 250 MC17 (more specifically I’m after the lights switch block and the choke assembly). Thanks!
November 11th, 2012 at 9:19 pm
Hi Valentin.
I have one in stock, so email me directoly at goodpartsnz@gmail.com and I can send you a photo and details. Cheers Simon
November 14th, 2012 at 12:07 am
after a 2 plug coil 12v to suit a 200 cc engine.
clutch lever. standard honda with the black rubber covering the end.
and a battery if you sell them
November 14th, 2012 at 10:41 pm
Hi Philip,
I cant help with a clutch lever but aftermarket levers are quite cheap now, so try a mc accessory shop. Not sure what you mean by a 2 plug coil. Do you mean a coil with 2 plug leads and caps for a twin cylinder engine?. Let me know what its for and will see if I can help. Email me at goodpartsnz@gmail.com Cheers Simon
November 14th, 2012 at 9:22 pm
Looking MC22 front forks, wondering if you have any, cheers
November 14th, 2012 at 10:41 pm
Hi Raymond.
Sorry cant help with MC22 forks currently. Cheers Simon
November 20th, 2012 at 5:52 pm
Looking for 1989 cbr600f forks. cheers
November 20th, 2012 at 10:28 pm
Hi Callum.
The early CBR600F used the same forks as the CBR400 Aero. I have a set from the Aero available. If you email me at goodpartsnz@gmail.com I can provide more details including photos. Cheers
December 17th, 2012 at 6:58 am
84 xl600 decompression clutch choke lever and hydraulic brake lever quote plz cheers if you have Merry Christmas
December 28th, 2012 at 8:48 pm
Sorry cant help with those. Cheers
December 28th, 2012 at 1:07 am
Hi mate
Do you have mirrors for a CBx 250f ?
Thanks heaps
Gav
December 28th, 2012 at 8:47 pm
Hi Gav, sorry cant help with those. You will likely have to try some afermarket mirrors that have the same bolt pattern as the CBX ones. Cheers Simon
December 28th, 2012 at 3:57 pm
Hi Simon
Do you some forks for a Honda 750 Sabre?
December 28th, 2012 at 9:12 pm
Hi Pete,
email me directly at goodpartsnz@gmail.com
I may have a pair of the chrome fork legs available if thats all you need, but I also have a set opn a complete bike, but wouldnt be able to remove these for a couple of weeks.
Cheers
simon
February 9th, 2013 at 4:43 pm
Hi do you have any ns250r or ns400r body work parts thanks
February 9th, 2013 at 10:50 pm
Hi Cameron,
I dont have a great deal in stock currently. I do have the RH side cover/tail section and also a fibreglass main upper front fairing. Its rough, but being fibreglass could be repaired. Email me at goodpartsnz@gmail.com and I can send photos if your interested. Cheers Simon
February 19th, 2013 at 10:28 am
I am chasing carb inlet manafolds and the foel pipe washers and o rings that join between the carbies
February 19th, 2013 at 7:16 pm
After carby inlet manafolds the fuel link pipe with washers and orings for a vt250f and what other parts Are avaliable
February 19th, 2013 at 9:19 pm
Hi Steve,
what model are you referring to?
February 19th, 2013 at 9:25 pm
Hi Steve, sorry cant help with those currently
February 19th, 2013 at 9:26 pm
sorry cant help with those currently
March 18th, 2013 at 5:08 pm
hey there i am after a gl1500 tow-bar assembly was wondering if yours has one on it
March 18th, 2013 at 8:43 pm
Hi Ivan,
sorry cant help with that one. Cheers Simon
March 29th, 2013 at 11:36 am
Hi
I’m looking for a RH side foot bracket for a Honda Jade MC23 the brake lever and foot rest is fine I just need the bracket,
If you could help me out it’d be much appreciated!
Cheers
Rene
April 1st, 2013 at 9:49 pm
Hi Rene,
sorry cant help there. Would be worth finding out if you can repair the bracket as Jade parts will be hard to find here. Cheers Simon
April 5th, 2013 at 2:09 am
Hi im looking for a Pair of shock off a rebel.
April 5th, 2013 at 9:30 pm
Hi Samuel,
thanks for your enquiry but sorry I cant help with any suitable shocks currently. Cheers Simon
August 7th, 2013 at 2:22 am
Hi How much for the whole Carburetor for the honda CB250 Hornet?
August 7th, 2013 at 9:22 pm
Hi Mat. I can supply a set of carbs from a 1997 Honda Hornet 250 at $120. You can email me at goodpartsnz@gmail.com for further details. Cheers Simon
August 13th, 2013 at 4:29 pm
Hi after front forks for cb550
August 13th, 2013 at 5:28 pm
Hi Jeff. Sorry cant help with those currently. Cheers Simonb\
August 13th, 2013 at 10:56 pm
hey, looking for a 1996 honda 250 hornet (CB250F) Fuel tank
August 14th, 2013 at 7:42 pm
Hi Jim. The only Hornet 250 tank I currently have in stock has dents on both sides at the widest point. It would therefore need filling and shaping etc befroe repainting, but is certainly repairable. If your interested, email me at goodpartsnz@gmail.com and I can email photos. Cheers Simon
August 18th, 2013 at 8:21 pm
Hi there, do you have any rear fearing handles like the ones on Honda Hornets. (the steel ones that are used to lift the rear of bike and they sit on top of the fearing behind seat.
Look forward to hearing back. Cheers
Jeff
August 18th, 2013 at 10:27 pm
Sorry Jeff cant help with those currently. Cheers Simon
August 26th, 2013 at 9:36 am
hi i am currently after a honda nsr 250 mc18 kick start lever any chance you’s might have one…
August 26th, 2013 at 10:34 pm
Hi. I dont think I have but will reply to your email and see what I can do. Cheers
August 26th, 2013 at 6:55 pm
Sorry i mean a tire for hornet 250. 130/70-16. If yes hows the condition and how much? cheers
August 26th, 2013 at 10:36 pm
Hi Mat,
Sorry no tyres in that size currently. Cheers Simon
September 10th, 2013 at 9:30 pm
Hi
I was wondering if u had any mc22 parts I was looking for?
Heel guards
Windscreen support
Chain gaurs for the swing arm?
Thanks
John Petch
September 12th, 2013 at 10:30 pm
Sorry John, none of those in stock curently. Cheers Simon
September 19th, 2013 at 4:27 pm
Hi mate, looking for a Speedo cable for a 1991 cbr600 pc25.
September 19th, 2013 at 10:10 pm
Sorry cant help with that one. Cheers Simon
September 28th, 2013 at 12:14 am
Hi, do you have any parts for a NC24 (or NC21 as most stuff is interchangable) honda vfr400? im in need of a radiator, left front fairing mount on side of frame, front windscreen brace that holds left side mirror, left side mirror, left handle bar, gear shifter, speedo, left side indicator, thats all for now, you can imagine what has happened lol, cheers
September 28th, 2013 at 10:14 pm
Hi Tim,
I have have a damaged NC24 in stock but will need to have a look at it and see if the parts you require are available and not damaged.
Please email me directly at goodpartsnz@gmail.com and I will get back to you once I have had a closer look at the bike.
Cheers Simon
November 4th, 2013 at 12:35 am
Hi there,
I’m looking for a single seat and/or seat cowl for a Honda GB400/500. Long shot, I know.
Cheers.
Ian
November 4th, 2013 at 9:16 pm
Sorry Ian cant help with that one. They tend to sell fast! Cheers Simon
November 4th, 2013 at 10:20 pm
G,day Simon, I bought the cb 650 c engine and parts from you a few years ago, and are now needing the cdi units. Do you think you can help,thanks.
November 5th, 2013 at 9:44 pm
Hi Daryl,
I think I can help with those, so email me directly at goodpartsnz@gmail.com and I can then send photos to make sure the ones I have are the same type. Cheers Simon
November 9th, 2013 at 4:43 pm
I am looking for a front fork tube as mine is damaged do you have one that would fit a 1100 honda shadow?
November 9th, 2013 at 7:37 pm
Hi Brian, sorry cant help with that one. Cheers Simon
November 26th, 2013 at 12:40 pm
Hi do you have any front mud guards, hand guards that would fit an XR200?
November 27th, 2013 at 8:13 pm
Sorry no
January 27th, 2014 at 12:33 pm
Hi there I’m looking for a fuel tank for a cbx250rs in good nick
January 27th, 2014 at 9:44 pm
Hi Evan. I have a fuel tank for the CBX250RS. Its scruffy cosmetically so will need a repaint but is otherwise straight and in sound order. If you would like more details you can email me direct, on goodpartsnz@gmail.om Cheers Simon
February 17th, 2014 at 5:07 pm
Hi I am after rims for a Honda cx 500.I would like the 5 spoke ones.
Do you also buy the un wanted rims?
Thanks Adrian
February 17th, 2014 at 10:04 pm
Hi Adrian, I dont think I can help with a rear wheel unless you need one from the Custom model, but I should be able to help with a front wheel. Please email me at goodpartsnz@gmail.com Cheers Simon
March 1st, 2014 at 9:26 pm
Hi Simon. Looking for CBX550 Integra turn signal + bracket, rubber boots for covering mirror legs to fairing and rear brake master cylinder (complete set – I have the reservoir). Can use the seat (complete) if viable. Actually please let me know what parts you have for the Integra you are dismantling. Cheers Sikha
March 2nd, 2014 at 9:38 pm
Hi Sikha,
I will be able to supply a complete indicator and possibly the rear master cylinder. If you can email me directly at goodpartsnz@gmail.com I can supply further details. Cheers Simon
March 16th, 2014 at 4:45 pm
Hi was hoping u have large number of parts left for the Cbr900rr 1999 fireblade you have listed im needing front forks, radiator, rail seat frame,headlight, Right handle bar and tail light also full flairing set. Kind regards levi
esayesrep@gmail.com
March 16th, 2014 at 8:57 pm
Hi Levi,
sorry but many parts are sold as I have had this bike in stock for several years now. I may have a tail light assembly, but thats about it I’m afraid
March 21st, 2014 at 6:10 pm
I am looking for both CBX250RS (MC10) exhausts in good condition, if avaible. Thank you! Hannes
March 21st, 2014 at 10:03 pm
Sorry cant help with those. You would be better to get a pair of cheap aftermarket mufflers as originals in good order will be very hard to find. Cheers
April 7th, 2014 at 3:41 pm
Hi,
I’m looking for the carbs for a cx400 custom 84 model.
Any luck?
Shan
April 7th, 2014 at 7:56 pm
Hi Shan, sorry no CX400 parts in stock currently
May 9th, 2014 at 6:53 pm
Hi I am looking at parts for a 1993 vfr400 nc30, in particular rims and some switches etc. my cell is 0211915590 cheers, Mark
May 11th, 2014 at 7:42 pm
Sorry Mark, no NC30 parts in stock. Cheers Simon
May 15th, 2014 at 11:24 pm
Do you have the headers and downpipes for the Honda SP1?
May 16th, 2014 at 8:10 pm
Sorry Ethan, those have been sold. Very few parts left from the SP1. Cheers Simon
June 12th, 2014 at 11:17 pm
HI. looking for a small handlebar mounted fairing, retro café racer style. Thanks Ross
June 13th, 2014 at 7:17 pm
Sorry Ross, I dont have any handlebar mounted fairings in stock. Cheers Simon
June 30th, 2014 at 11:13 pm
Hi, I am trying to find a white rh plastic side cover to suit a cbx650e 1984, If you have one can you please let me know, thanks Colin. Cranbourne Australia. 0457035701
June 30th, 2014 at 11:22 pm
Hi Colin. I have dismantled a CBX650E but unfortunately I only have the LH side cover in stock. Not many of these about. Cheers Simon
August 12th, 2014 at 1:25 pm
Hi, I’m looking for VFR400 NC24 spares. In particular any rough fairings which I could chuck on for track use. Do you have any NC24’s being pulled apart? Cheers.
August 12th, 2014 at 10:39 pm
Hi Jamie,
I do have an NC24 in stock but I only have one LH fairing panel available. Cheers Simon
August 13th, 2014 at 4:07 pm
Cheers. Any good spares in the way of breakables? IE foot pegs, shifters etc? Not planning on chucking it down the track too often but having them there on the day would be good 🙂
August 13th, 2014 at 10:26 pm
Should have some but will need to check first. Email me directly at goodpartsnz@gmail.com and I can then send you photos and further details. Cheers
September 1st, 2014 at 7:48 pm
need honda bros 400cc.1989 rear disc.
inner wheel rubbers or ones can be cut down
to fit.
thanks
September 1st, 2014 at 10:28 pm
Hi Warren,
sorry I cant help with those. You will need the correct cush drive rubbers rather than trying to modify ones from another model. Cheers Simon
September 13th, 2014 at 5:35 am
hello friends i am from INDIA , i need help in restoring my HONDA NS250R MC11parts like Radiator , Headlight , Kick starter, Air Filter box and Radiator guard
September 15th, 2014 at 9:53 pm
Hi. I may be able to help with a radiator, headlight and kick start. If you email me directly at goodpartsnz@gmail.com I can then email more details. Regards Simon
September 15th, 2014 at 6:56 pm
Hi. Ive just bought a 1986 CB750F to make into a Cafe. I would prefer the spoked wheels. Do you have any that would be suitable for this bike? Cheers, Peter
September 15th, 2014 at 9:49 pm
Hi Peter,
sorry cant help with those. The first CB750KZ (4 pipe model) in 1979 had spoked wheels but dont think we ever saw that version here. Cheers Simon
October 5th, 2014 at 8:33 am
hi do you have a working order honda ns250r fuel tap?
October 5th, 2014 at 9:39 pm
Sorry, all sold currently. Cheers
October 24th, 2014 at 9:06 pm
Hi I’m after CBR1000F 1987 mirror and plastics plus other parts if you can come back to me thanks
October 24th, 2014 at 9:23 pm
Hi Rex, I think you may have asked about these on my Trademe listing. If you can email me directly at goodpartsnz@gmail.com I will send photos of the parts. Cheers Simon
October 25th, 2014 at 1:30 pm
Hi, I am after fairings for an 84 na 250 r. I am going to try my hand at restoring it. I see u have an 86 listed are these the same parts?
Thanks Doug
October 25th, 2014 at 8:28 pm
Hi Doug,
yes the model was released in 1984. Unfortunately I dont have any fairings in stock. The only body work I have is the Rh palen that runns along the side of the bike under the seat to the tail. Cheers Simon
October 25th, 2014 at 9:20 pm
Thanks for the quick response Simon. That’s the one panel that is ok on my bike. Was looking over it today, I also need the dash display as plastic has gone brittle and is all broken. Do u come across these parts very often?
Cheers Doug
October 26th, 2014 at 10:05 pm
I may be able to help with that one but will need to check. you can email me directly at goodpartsnz@gmail.com Cheers
November 12th, 2014 at 5:48 pm
Hi
Im after header pipes for a GB400tt. Its for a custom project so no issue with year.
Ned
November 12th, 2014 at 9:38 pm
Sorry Ned, cant help with header pipes currently. Cheers Simon
November 18th, 2014 at 9:12 am
Hey mate
I am looking for honda cbr 250 mc22 side fairings..please revert me back asap
Thanks
November 18th, 2014 at 9:59 pm
Sorry no fairings for that model in stock currentlky.
November 21st, 2014 at 10:42 pm
Hi,
After a VTR1000 complete engine. Thanks
November 23rd, 2014 at 7:59 pm
Hi Heff.
The only VTR1000 engine I have in stock is from a 1997 model, and its really only suitable for parts as the bike was sold to a dismantler (not me) due to some engine problem. Cheers Simon
November 24th, 2014 at 5:39 pm
hi i see you do street bikes but i was wondering if you would have a 2000 honda xr250r gear lever. cheers james
November 30th, 2014 at 1:46 pm
hi im after some rear veiw mirrors for my cbr1000f,can anyone help thks
November 30th, 2014 at 6:42 pm
Hi Shane,
I have some mirrors in stock for the CBR1000F. If you email me directly at goodpartsnz@gmail.com I can check the model and provide photos. Cheers Simon
December 11th, 2014 at 2:07 pm
Hi, I’m in need of a fuel tank, rear suspension & muffler for my 1988 Honda Spada. Depending on cost, I may also want to replace front foot pegs & faded plastics on R side of bike. Could you please let me know prices for these & shipping costs to Sale, Victora, Australia 3850?
With thanks,
Marie Taylor
December 15th, 2014 at 6:39 pm
Hi Marie,
I cant help with a fuel tank and the exhaust on the Spada is mainly a single piece setup that includes the front header pipe, collector box and the muffler. I will have a used rear shock absorber in stock at $100. You can email me directly at goodpartsnz@gmail.com if you would like more details. Chers Simon
December 23rd, 2014 at 2:31 pm
Hi, I’m looking for a set of GB500tt Single foot peg mounts, gaiters for the front shocks and undamaged speedometer surrounds.
Many thanks,
David
December 23rd, 2014 at 8:30 pm
Hi David, all I can help with is a RH alloy footpeg hanger bracket at $70 from the single seat GB500. You can contact me at goodpartsnz@gmail.com if you would like further details. Cheers Simon
February 2nd, 2015 at 4:41 pm
hi im after start stop switch with wiring for a 82 cb900f also ignition spark unit.
February 2nd, 2015 at 10:19 pm
Hi. I cant help with the RH switch block currently. I may have a pair of ignitors from an early CX500, but will need to check these before confirming as only some CX models used the same ignitors as the CB900. If they are the same and in good orde, they will be available at $150/pair.
You can email me directly at goodpartsnz@gmail.com Cheers
February 16th, 2015 at 2:26 pm
Hi I’m looking for a carburetor for a 1989 Honda bros nt400k. Hoping you can help me or know someone that can. Kind regards
February 16th, 2015 at 6:48 pm
Hi Graham,
sorry cantb help with those. try Buckets n Bits in Wellington or Bike Busters near Hamilton. Both have websites. Cheers Simon
February 23rd, 2015 at 8:47 pm
Hi,
Do you have front left hand brake caliper and front master cylinder off a CB900 Honda? If so how much?
Cheers
February 23rd, 2015 at 9:15 pm
Hi Ian. Don’t think I can help with a master cylinder assembly but I may have a caliper. If you can email me a photo to goodpartsnz@gmail.com I will compare with a couple I have in stock. Cheers Simon
March 11th, 2015 at 3:10 am
Hi I’m looking for a honda spada chain cover and sprocket cover, how much would they cost + postage?
Thanks
March 11th, 2015 at 9:43 pm
Hi.
I have a chain guard in good order available at $40 and should also have an engine sprocket cover in stock. I am currently on holiday so wont be able to supply until the first week of April. You can email me directly at goodpartsnz@gmail.com Cheers Simon
March 17th, 2015 at 12:27 pm
Hi, After a straight road worthy frame for a 2997 Cbr900 SC33 cheers
March 18th, 2015 at 1:07 am
Sorry cant help[ with that one currently. Cheers Simon
March 26th, 2015 at 8:53 pm
Can you please advise if you have a pillion seat cover ( the cover that replaces the pillion seat) for a Honda SP1
Thanks
Mike Grooby
March 27th, 2015 at 11:07 pm
Sorry cant help with that one Mike. Cheers Simon
March 26th, 2015 at 10:38 pm
Hi, I’m looking for a set of front brake rotors for a 00 CBR600f4 and also a set of passenger footrests. Would you have any of these in stock? Thanks
Dave
March 27th, 2015 at 11:07 pm
Sorry Dave, nothing in stock for that model. Cheers Simon
May 13th, 2015 at 10:42 am
Hi there, do you have a Honda Hornet 250 MC31 fuel tank? Thanks Jacques
May 13th, 2015 at 11:18 am
Sorry Jacques cant help with that one currently.
May 16th, 2015 at 1:13 pm
Hello, do you have a fuel tank for GB500TT?
May 16th, 2015 at 8:08 pm
Sorry no
May 16th, 2015 at 7:45 pm
Hi looking for a 1987 vt 500 custom starter motor have u got in stock cheers
May 16th, 2015 at 8:09 pm
Hi Kelvin.
yes I should have a starter on a VT500 engine I have in stock. If you email me directly at goodpartsnz@gmail.com I will check it out and get back to you with more details. Cheers Simon
May 23rd, 2015 at 1:12 pm
Hi I’m after a honda cbxrs 250 starter motor. Have you got one and how much?
May 25th, 2015 at 10:16 pm
Hi Luke,
sorry cant help with that one. Cheers Simon
August 13th, 2015 at 9:39 pm
Hi Simon I am after the 1990 VFR fairing parts as discussed. Can you please email photos. Many thanks Guu
August 13th, 2015 at 10:02 pm
Will email you directly. Cheers Simon
September 29th, 2015 at 7:44 pm
hi there trying to fin a complete or near complete cb 50. any chance yo have one or a line on one
September 29th, 2015 at 10:40 pm
Sorry cant help with that one. Cheers
October 23rd, 2015 at 12:33 pm
Hi, do you have a complete Spada exhaust? Rgrds Kirk
October 23rd, 2015 at 9:34 pm
Hi Kirk,
yes I have a complete exhaust system in stock. If you email me directly at goodpartsnz@gmail.com I will get back to you with details including photos, after the holiday weekend. Cheers Simon
December 5th, 2015 at 1:56 pm
Hi Simon
Iam looking for parts for Sp1 / RC51, cans, fairing etc, anything in stock?
December 5th, 2015 at 9:52 pm
Sorry Neil, I have very few parts remaining for the SP1 and they dont include fairings or mufflers. Cheers Simon
December 8th, 2015 at 11:49 am
Hey mate, im looking for quite a few bits, im looking for a whole fairing set sides front headlight surround etc, Key barrel, panel for around key barrel, both levers, rear brake set & air box. Pretty sure i have VT250F 1986 so not sure if what you have will fit. If you got an email address i can send you photos of what i have, maybe you could tell me 🙂 Thanks 021 255 3463 P.S do you have a number to call on?
December 8th, 2015 at 6:56 pm
Hi Dan, email is preferable to a phone call. My business is predominantly internet based and an email allows me time to check my inventory (and complete bikes if need be) to see if I have the parts you require. There are many different VF250F models so please email me at goodpartsnz@gmail.com with a photo of your bike and a list of parts you require. Cheers Simon
January 7th, 2016 at 8:46 pm
i need the rear axel with spacers for my honda cb400n
January 8th, 2016 at 7:56 am
Sorry cant help with that one. Cheers
January 12th, 2016 at 2:24 pm
Hi,
I’m searching for a left hand switch block to suit a 1992 Honda cbr250rr.
Would you have one in stock?
Thanks, Julian
January 12th, 2016 at 6:26 pm
Sorry nothing in stock currently.
February 12th, 2016 at 11:38 am
I was wondering if you had a radiator cap for a 1988 vfr 700 cheers
February 12th, 2016 at 9:11 pm
Hi Murray. I have an 88 VFR700 in stock but will need to check that the radiator cap is ok. Cant see why it wont be though. If you email me directly, at goodpartsnz@gmail.com I will reply once I have been able to check it out. Cheers Simon
February 24th, 2016 at 10:06 pm
hi there i am after the duck tail for a cbr1100. i contacted you on trade me. last week.do you have a decent right hand side fairing? and any fairing screws? also a front top fairing in any condition?
February 25th, 2016 at 8:32 am
Hi Aaron, I have a complete tail section bodywork in very good order other than some very light scratches in one area. Also have a RH fairing panel in good order. Has some light grazes which will be easily repaired during prep for painting and it is missing one internal mounting lug. No top fairing and fairing screws etc have been sold. If you email me directly at goodpartsnz@gmail.com I can supply further details including photos. Cheers Simon
March 29th, 2016 at 12:37 pm
Hi I have a 1992 cbr 600 f2 and I’m looking for an engine to put into it. The starter boss has shattered and cannot be replaced. So either I put an engine in or scrap the bike.
The bike is currently in darfield so not too far from Christchurch
Look forward to hearing from you
Jo
March 29th, 2016 at 12:43 pm
Hi Jo,
sorry cant help with a suitable engine I’m afraid. If you decide to consider selling the bike for dismantling, you can email me directly with details at goodpartsnz@gmail.com Cheers Simon
April 1st, 2016 at 8:43 pm
Hi I have a good gl400 I would love to get my hands on the engine out of a 500 if you have a working one I would love to know how much you would want for it
April 1st, 2016 at 10:05 pm
Sorry no CX500 engines in stock currently. Cheers Simon
May 1st, 2016 at 7:48 pm
Hi do you have a front left indicator for a honda cbr 250rr mc22 by any chance?
May 2nd, 2016 at 6:40 pm
Hi. yes I have a LH front indicator available at $30 plus postage. If you email me directly at goodpartsnz@gmail.com I will provide postage costs and my account details for payment. Cheers
May 31st, 2016 at 8:22 am
hi looking for air filter covers for a 1984 vf 750s honda both covers and how much thanks
May 31st, 2016 at 9:19 am
Hi. I should have both airbox outer covers in stock but need to check on their condition. If you can email me directly at goodpartsnz@gmail.com I wil reply with more details including photos. Cheers Simon
June 19th, 2016 at 6:38 pm
vf500 motor ??? thanks wayne chch
June 21st, 2016 at 8:34 am
Sorry cant help with a VF500 engine. Not too many of these about and I haven’t had one in for dismantling. Cheers Simon
June 21st, 2016 at 12:35 pm
After forks for a mc 19 ? Cheers Scott Auckland
June 21st, 2016 at 1:35 pm
Hi Scott,
yes I can supply a pair of forks in good order at $250. If you email me directly at goodpartsnz@gmail.co I can provide additional details. Cheers Simon.
June 27th, 2016 at 10:13 am
HI I was wondering if you had a 74 cb200 throttle cable in Stock and how much it would cost
June 27th, 2016 at 11:44 am
Sorry cant help with that one. Cheers
July 30th, 2016 at 11:18 am
Hi there,
I have a slightly hacked up VT500 that is missing the coolant overflow tank, do you happen to have one? Cheers
July 31st, 2016 at 8:55 pm
Sorry cant help with that one.
August 5th, 2016 at 7:37 pm
That’s alright, have rigged something up with a soda can for now haha.
Next question: Does the VT500 still have a working coil?
Cheers
August 6th, 2016 at 10:45 am
I only have a handful of parts from the VT500. I had two coils marked as being from the VT500 but both a different sizes. I assume different models. I have the smaller one remaining. If you email me directly at goodpartsnz@gmail.com I can then send a photo. Cheers Simon
September 20th, 2016 at 10:41 pm
Would you have a seat cowl for am SP1? What condition?
Would you so have a tail fairing? What condition?
If so how much each? And frieght to auckland?
September 21st, 2016 at 8:45 am
Sorry cant help with those Glen. I only have a handful of parts remaining from the SP1. Cheers Simon
October 17th, 2016 at 12:05 pm
I am looking for a rear shock for a Honda spada vt250 1988
October 17th, 2016 at 1:03 pm
Hi Crystal. I can supply a rear shock for a VT250 Spada at $100. If you are interested, you can email me directly at goodpartsnz@gmail.com and I can provide further details. Cheers Simon
October 25th, 2016 at 9:05 pm
Do you have a cx500 or 400 frame? Looking for the single back bone type. Cheers, Karl.
October 26th, 2016 at 8:17 pm
Sorry Karl, all sold currently.
December 12th, 2016 at 10:26 pm
Looking for clutch and brake levers and a right rear indicator for a 1987 honda cbx750f boldor
December 13th, 2016 at 9:09 am
Hi Brendon. I cant help with clutch and brake levers but I can supply a complete Rh rear indicator assembly including the rubber stem in good tidy order at $30. If you email me directly at goodpartsnz@gmail.com I can provide a photo and also bank account details fr payment. Cheers Simon
December 19th, 2016 at 10:26 am
heya, sc33 cbr fireblade 99′ green-blue and red
what have you got in terms of fairings? also after alternator cover, clutch lever, left riders footpeg, left mirror, in auckland, cheers 🙂
December 19th, 2016 at 8:17 pm
Hi Kyle,
cant help with most of the parts you listed sorry, but I do have some fairing panels, although they may need repainting in your colour scheme.
If you email me at goodpartsnz@gmail.com I can send photos of the fairing panels that are still in stock. Cheers Simon
December 20th, 2016 at 3:36 am
Hey mate I’ve got a 1990 cbr250rr mc22 that I pulled apart to clean the carbs out in the process the tank got knocked off shelf and the fuel tap snapped off do u have a complete tap set up for it with the tap or can I replace just the tap I’ve looked at it but it doesn’t appear to be possible
December 20th, 2016 at 8:25 am
Hi Andrew.
I cant help with a fuel tap but by the sounds of it, you have snapped off the black plastic knob, rather than the fuel tap itself which is alloy. The black plastic knob should have a small hole down the centre and there will be a small philips head screw at the bottom which when undone, will allow the plastic knob part to be pulled off the fuel tap itself. You may be able to still buy these new so its worth asking at a Honda dealer, or you may find one at another wrecker. Cheers Simon
December 21st, 2016 at 9:34 am
Cheers mate sadly it has snapped just below the black plastic so I think I’ll need a whole new tap thanks for taking the time to replie
December 20th, 2016 at 10:46 pm
hi there iam keen to purchase a honda frame shadow or steed or something similar to those models please
December 21st, 2016 at 8:28 am
Hi Triston.
I have a frame from a Honda 1997 Honda VT750 Shadow in stock, although its been deregistered . If you would like further details please email me directly, at goodpartsnz@gmail.com Cheers Simon
February 17th, 2017 at 11:31 am
Hey I’m after left side front flaring for a 95cbr1000f
February 17th, 2017 at 7:43 pm
Sorry cant help with that one. Cheers
March 29th, 2017 at 3:57 pm
Hi I’m after a speedometer for ’12-’16 CBR1000rr
March 29th, 2017 at 7:48 pm
Sorry cant help with that one. Cheers Simon
March 30th, 2017 at 5:41 pm
Hi there I was wondering if you have and cx/gl 400 mufflers I have a 1985 gl400 custom and need mufflers
March 31st, 2017 at 8:28 am
Sorry cant help with those. You may find it easier to fit some aftermarket mufflers.
April 2nd, 2017 at 3:51 pm
HI, do you have any cb750 (1981) front forks? Cheers
April 2nd, 2017 at 7:15 pm
Hi Tim. I have a pair of 35mm forks from an 81 CB900F which should be the same as your 750. Unfortunately one leg has some small pits down low while the other leg is clean to a point approx 140mm above the top of the lower fork leg, which should be OK. If you would like any further details including photos, email me at goodpartsnz@gmail.com Cheers Simon
April 4th, 2017 at 2:22 pm
Hi do you have any parts for a xr 200r 1982 model or like it, thanks
April 5th, 2017 at 10:25 am
Sorry no, as I mainly deal in road models. Cheers
April 4th, 2017 at 9:14 pm
Hello,
I’m looking for a replacent outer gear box cover.
This is a Honda VFR400 motor that is on a Buggy. Sorry don’t know the year. I can email you a picture if that helps
Cheers
Cameron
027-932-6815
April 5th, 2017 at 10:25 am
Hi Cameron. I know the part you mean and should have one in stock. If you can email me at goodpartsnz@gmail.com with a photo, I can compare with the one I have in stock. Cheers Simon
April 29th, 2017 at 9:28 pm
hey, after a front wheel for a gb400tt
April 30th, 2017 at 10:07 am
Sorry all sold currently. Cheers Simon
May 5th, 2017 at 5:39 am
hey
looking for complete triple clamp and 41 mm fork setup front wheel and sprocket ect , from a honda shadow vlx vt steed
May 5th, 2017 at 9:43 am
Sorry cant help with that one Triston. Cheers Simon
May 5th, 2017 at 7:35 am
heya, looking for a front wheel for my GB400
May 5th, 2017 at 6:51 pm
Sorry cant help with that one.
May 10th, 2017 at 10:53 pm
Hi, Looking for mirrors for a CBR400r Aero. They would be the ones that have a split in the middle.
Thanks
May 11th, 2017 at 9:28 am
Sorry cant help with those currently. Cheers Simon
May 26th, 2017 at 10:58 pm
Simon,
CX500 final drive flange?
Regards,
Lee
May 27th, 2017 at 8:40 pm
Sorry looks like I cant help with that one Lee. Cheers Simon
June 3rd, 2017 at 5:16 pm
hiya, was wondering if you have a set of 1990 vfr750 forks and a set of front brake callipers. cheers
June 4th, 2017 at 10:30 am
Hi. I cant help with forks, but I have a pair of front calipers in very tidy order from a 1994 VFR750 and these look to be the same as those used on the 1990 model. The calipers are available at $150/pair. If you are interested, email me directly at goodpartsnz@gmail.com and I can send a photo for you to compare. Cheers Simon
June 14th, 2017 at 10:35 pm
Do you have a centre stand for an 86 vfr 700/750
June 15th, 2017 at 12:08 pm
Hi Stu.
Sorry cant help with that one. Cheers Simon.
June 15th, 2017 at 11:29 pm
heya just wondering if u have any rims for the gb 400 or gb 500 thanks
June 16th, 2017 at 9:08 am
Sorry all sold. Cheers
July 17th, 2017 at 5:36 pm
Hi. Honda mc22 fork suspensions. Do you have?? Regards
July 17th, 2017 at 6:48 pm
Hi Leonardo. I have a complete CBR250RR MC22 in stock and the forks on this bike are in very good order. If you would like more details please email me at goodpartsnz@gmail.com Cheers
Simon
August 4th, 2017 at 9:44 am
hey, i’m looking for cbr250rr mc22 fairings. got any?
August 4th, 2017 at 10:01 am
Morning Denny.
I have recently dismantled a 1992 CBR250RR MC22 and have a set of fairings available. They are fibreglass fairings rather than the original plastics. Some small repairs needed but overall very tidy. If you interested, please email me directly at goodpartsnz@gmail.com and I can send photos and further details. Cheers Simon
August 11th, 2017 at 3:29 am
Do you have cheap piston for cb250rs 1982
August 11th, 2017 at 9:24 am
Sorry Steven, cant help with a CB250RS piston. Cheers Simon
August 12th, 2017 at 11:22 pm
Hi looking for pack rack or pannier mounts for cb750 K 1982
August 13th, 2017 at 10:28 pm
Sorry cant help with those Daniel.
September 17th, 2017 at 7:55 pm
Hi. Looking for throttle cables for a GB400. Any luck?
September 17th, 2017 at 8:19 pm
Sorry all sold.
October 3rd, 2017 at 9:19 pm
Hey mate! I see through some of the comments that you’ve just gotten an MC22 in. Have you got the silencer for it still??
Cheers,
Sam
October 4th, 2017 at 7:52 am
Hi Sam. I do have an MC22 muffler in stock and will email you directly with details including photos. Cheers Simon
October 4th, 2017 at 12:49 pm
hey team
iam looking for either your guys honda vt750 or vt1000 triple tree and front wheel ? are those still available and worse case the vt400 please please ?
cheers
October 4th, 2017 at 7:59 am
Hey,
I asked a couple months ago and you did not have them then, just wondering if you have the mirrors for the Cbr 400 aero now by chance?
Thanks,
Sanam Gill
October 4th, 2017 at 9:30 pm
Sorry Sanam, still cant help with those. Cheers Simon
October 14th, 2017 at 6:23 am
Hi
Do you currently have any cb750 fuel tanks?
Cheers
October 14th, 2017 at 8:48 am
Sorry sold my last CB750F tank a couple of weeks ago. Cheers Simon
October 27th, 2017 at 8:59 am
looking for a muffler for a cbr250rr mc22. Do you reckon you could help me out?
cheers
denny
October 27th, 2017 at 1:06 pm
Hi Denny. I have an MC22 muffler in tidy order in stock. If you email me at goodpartsnz@gmail.com I can then send photos and further details. Cheers Simon
October 29th, 2017 at 10:11 am
Hi, what if any parts do you have for a MVX 250? I’d particularly like a single seat cowl but interested in all parts. Thank you.
Best regards,
Glen
October 29th, 2017 at 10:43 am
Hi Glen. I cant help with a single seat cowl, but I do have quite a few MVX250 parts. Best option is to email me at goodpartsnz@gmail.com with a list of parts you may require and I can then reply with photos if I have anything suitable in stock. Cheers Simon
November 25th, 2017 at 6:41 pm
Hi, looking for a good condition headlight for a 89 Honda GB? Cheers
November 25th, 2017 at 7:17 pm
Sorry cant help with that one Glenn. Not many GB400/500 parts in stock currently. Cheers Simon
November 28th, 2017 at 8:21 pm
After a stator for honda blackbird 1100xx 1997,
Cheers Dan.
November 28th, 2017 at 9:22 pm
Sorry cant help with that one Dan. Cheers Simon
January 3rd, 2018 at 9:11 am
Hi there I have down pipes but I was wondering if you have good condition slip on pipes for a gl400 custom I think the 500 will fit I’m finding it hard to get parts I have a 85 gl400 custom
January 3rd, 2018 at 5:42 pm
Hi Martin. Sorry I cant help with any mufflers to suit the CX400/500 currently. Cheers Simon
January 11th, 2018 at 7:37 pm
CB200 carburetors?
January 11th, 2018 at 8:42 pm
Sorry cant help with those. Cheers Simon
February 2nd, 2018 at 8:42 pm
hi there, Probably a dumb question, but Just got my hands on a n old 85 ATC250es three wheeler. There doesn’t seem to be any sites in NZ with parts, the . if anyone has any leads let me know hadnjen@gmail.com
February 2nd, 2018 at 9:08 pm
Hi. Sorry I cant help with that one as I dont deal in quad parts, but your best option is to check the Trademe listings for quad dismantlers and ask a question on any of their listings. There looks to be several quad wreckers in the North Island. Cheers
March 3rd, 2018 at 4:40 pm
Hi have you got honda cbr750 hurricane exhaust manifold in stock mine is a 1988 japenese import I can’t find one anywhere if you could email me or txt or call me jamie 07483 869752 many thanks look forward to you’re reply hopefully you can help me out
March 4th, 2018 at 5:44 pm
Hi Jamie. I have a CBR750 Hurricane in stock and from memory the exhaust system is OK, but I will need to check before confirming. If you can email me at goodpartsnz@gmail.com I will get back to you with more details once I have had a closer look at the bike. Cheers Simon.
April 3rd, 2018 at 1:56 pm
Hi there could I please have a price to supply to Wanganui New Zealand a CDI for a Honda CX500?
Thank you
April 3rd, 2018 at 10:21 pm
Hi William.
i have CDI units available for the early model CX500. These are a metal cased CDI, whereas the later models used the twin solid state type ignitors. If you email me at goodpartsnz@gmail.com we can then determine what type you require. Cheers Simon
April 12th, 2018 at 3:15 am
Chasing a CX500c 1981 L/H side cover
April 12th, 2018 at 9:32 am
Hi Paul. Sorry cant help with that one as I only have a RH sidecover remaining in stock for the Custom model. Cheers Simon
June 14th, 2018 at 9:55 am
I need full fairing for Honda NC 24 please quote
June 14th, 2018 at 8:17 pm
Sorry cant help with those. A full set of fairings will be very difficult to find, but you should be able to get one of the Chinese aftermarket sets online. These seem to be reasonable quality for a very reasonable price and come with a variety of paint and decal schemes. Cheers
July 21st, 2018 at 2:15 pm
I’m looking for a stator for a 1991 cbr1000f. Any chance the ’92 you have still has one on it?
July 21st, 2018 at 4:11 pm
Sorry Matt, the stators have sold.
July 25th, 2018 at 6:47 pm
Hi, do you still have parts for a Honda SP-1?
Cheers.!
July 25th, 2018 at 8:16 pm
Hi Tim,
Just about all sold I’m afraid. I have coils, LH switch block, choke cable, some relays, radiator fan, stator, overflow bottle, solenoid and thats about it. Cheers Simon
October 3rd, 2018 at 11:12 am
Hi, Do you have an air box for a NSR250 MC21?
October 3rd, 2018 at 11:27 am
Hi Scott. Yes I have an NC21 airbox in stock, and its been fitted with a reusable filter element. The airbox is available at $50 plus shipping, so if you email me directly, at goodpartsnz@gmail.com I can send you details including photos. Cheers Simon
October 26th, 2018 at 12:04 pm
Hiya I’m looking for the air box for a Honda cbr 250r hurricane? Would you have one?
October 26th, 2018 at 12:18 pm
Hi Donal,
I should be able to help with that one. I generally only sell airboxes complete but I do have some parts available from certain models. If you can email me at goodpartsnz@gmail.com and let me know which model this is (MC14, MC17 or MC19) and the year if possible. I will then see if I have any suitable parts and can email you with details including a photo. Cheers Simon
October 31st, 2018 at 8:14 pm
Hwy mate looking for the left hand foot peg mount of a vfr 750 1986. Also could be interested in front fairing and left hand side fairing. Cheers.
October 31st, 2018 at 8:43 pm
Hi Leon. Sorry I cant help with a LH footpeg hanger or any fairing panels for this model. Cheers Simon
December 10th, 2018 at 8:33 pm
Hi there iam after a 1986 CBX550 HONDA starter motor can you help me out cheers.
December 11th, 2018 at 7:55 pm
Sorry all sold.
December 11th, 2018 at 10:22 pm
Thanks man and Merry Christmass and New year.cheers
December 11th, 2018 at 10:39 pm
Hi
Do you still have the head and cam for cb650?
December 11th, 2018 at 10:43 pm
Hi Steve,
I should have a head assembly in stock, but no cam shaft. If you email me at goodpartsnz@gmail.com I can check it out and provide more details. Cheers Simon
January 10th, 2019 at 10:18 pm
Hi got any ignition switch/barrel for a cbr1000f. Cheers
January 11th, 2019 at 8:00 am
Sorry Neal, all sold currently. Cheers Simon
February 16th, 2019 at 9:37 pm
After a front brake caliper for 1985-86 Honda CMX 250 Rebel or equivalent. You got anything and what’s the price thanks
February 17th, 2019 at 10:39 am
Hi James. Nothing in stock from that model but if you can send some photos to me at godpartsnz@gmail.com I will see if a caliper from another model will fit. Cheers Simon
February 17th, 2019 at 11:29 am
Thanks Simon. I have had a response about another one that is off a 1986 Honda 250 Rebel so will follow that up and if it doesn’t pan out i’ll get back in touch with some pics of my seized one. Cheers,
March 4th, 2019 at 11:20 am
Looking for Honda Cub, C70, C90 frame and front forks. Let me know if you bump into any.
March 4th, 2019 at 12:35 pm
Sorry nothing in stock. Cheers Simon
March 20th, 2019 at 11:18 am
Hey, CBR250RR MC22 – needing wing mirrors, indicators and what fairing do you have for them? Need a new tail
March 20th, 2019 at 12:34 pm
Hi. I cant help with mirrors, but I should have some indicators in stock. No upper front fairing, only a LH fairing side panel that needs some minor repairs. Should also have the tail section side panels and the small section that goes around the tail light. If you email me at goodpartsnz@gmail.com I can reply with further details including photos. Cheers
April 20th, 2019 at 9:25 am
Hi there.
Do you have any parts for a 1973 CB200.
Thanks
April 20th, 2019 at 10:15 am
Hi Nick. I have a few parts from the CB200 in stock, although not a great deal. If you email me at goodpartsnz@gmail.com with a list of parts you are looking for, I will reply with details including photos if I have anything suitable in stock. Cheers Simon
June 15th, 2019 at 11:01 am
Hi there I am trying to track down a rocker box for a cb650 ’79 – ’82 model (rc03 engine)
June 15th, 2019 at 11:21 am
I have your email Craig, and will reply once I have checked to see if I have one in stock. Cheers Simon
August 23rd, 2019 at 6:50 am
Hi I’m looking for 1988 Cbr 1000f Hurricane front end parts eg fleering headlight clutch handle mirrors instrument cluster I had a bad spill want to rebuild my bike please
Could you please give me a itemized quote
Feel free to call me on 02041663999
August 23rd, 2019 at 9:52 am
Hi. I cant help with a fairing, but I will have a complete dash assembly in good order at $120 and also a headlight at $80. If its only a clutch lever you need, its best to buy a new aftermarket replacement lever, but I will have a complete clutch master cylinder assembly with clutch lever in stock. Don’t think I have any mirrors in stock, but can check. If you email me directly, at goodpartsnz@gmail.com I can reply with further details including photos. Cheers Simon
November 30th, 2019 at 9:16 pm
Hi, I am after CB200 rear brake pedal, main foot rest bracket and peg assembly and a bare frame if possible. Thank you for your help
December 1st, 2019 at 8:51 am
Hi Ashley. I have a brake pedal and the footpeg bracket assembly in stock. Both have surface rust, but are otherwise sound. If you email me directly, at goodpartsnz@gmail.com, I can send you some photos to view. Cheers Simon
December 4th, 2019 at 3:39 am
Would you have a overflow tank for a CX500 custom 1981
December 4th, 2019 at 9:34 am
Hi. Yes I will have one in stock at $30 plus postage. If you email me at goodpartsnz@gmail.com I will reply with a photo and further details. Cheers Simon
December 26th, 2019 at 1:40 pm
would you have a good pair of stantions for a CB 650 LC ( 37mm)
And a pair of front discs for same?
December 26th, 2019 at 5:37 pm
Sorry cant help with those. Cheers
February 5th, 2020 at 1:34 am
Cdi for a 91 cbr699f2?
February 5th, 2020 at 7:48 am
yes I have a CDI available at $150 including postage. You can email me at goodpartsnz@gmail.com if you’d like further details. Cheers
February 5th, 2020 at 12:02 pm
Hi. Looking for Crash Bars, front fearing (Honda red color), headlight for Honda cx500 97 model.
February 5th, 2020 at 12:27 pm
Hi. I may be able to help with a headlight, depending on the model. I didn’t think the CX500 was made as late as 1997, but sounds like the Euro model. If you can email me at goodpartsnz@gmail.com with a photo of your bike, I will see if I can help. Cheers Simon
February 28th, 2020 at 8:14 pm
Do you have a choke cable for a VF750F?
February 28th, 2020 at 8:38 pm
Hi Lindsay. I should have a choke cable in stock in good order at $20, but will need to check before confirming. If you email me at goodpartsnz@gmail.com I will check and then get back to you with details including a photo. Cheers Simon
March 6th, 2020 at 3:36 pm
Hi looking for airbox for 1997Honda cbr 1100 Blackbird carburettor model thanks lyall
March 6th, 2020 at 11:20 pm
Sorry cant help with that one currently.
March 31st, 2020 at 8:52 pm
hey just wondering if ya got any fairings for a cbr250rr mc22 and a tank to match the fairings? cheers
April 1st, 2020 at 9:36 am
Hi. Sorry no MC22 fairings in stock. Possibly worth looking at one of the complete fairing kits from China. I do have a fuel tank (yellow) in stock and if you email me at goodpartsnz@gmail.com I can provide details including photos. Please not that due to postal and courier services being limited to essential services , I am unable to send any parts until after the lockdown is lifted.
April 28th, 2020 at 9:37 am
Hey hows it going im looking for parts for my honda cbr400rr (nc29) im looking for pretty much a hole handle bar set up , i need both switchboxs for lights etc and the throttle, break and clutch lever cheers would really appreciate it if you could help cheers bradie
April 28th, 2020 at 10:02 am
Hi Bradie. I can only help with a few parts from your list. I will have a pair of clipon bars, and a clutch perch (bracket) in stock, but not the other parts you need. If you email me at goodpartsnz@gmauil.com I will provide details including photos. Cheers Simon
May 30th, 2020 at 9:05 pm
Hey, does the Honda cbr250r mc19 1989 have an intact fuel tank? And if so how much would you charge for it?
Cheers
May 31st, 2020 at 10:40 am
Sorry all MC19 fuel tanks are sold currently.
June 7th, 2020 at 6:24 pm
Hi after a fuel tank for a cbr250 mc17
June 7th, 2020 at 6:32 pm
Hi Geordie. I have a fuel tank from an MC14 which is the same tank as the MC17. Its currently painted white, but is straight and doesn’t have any rust issues. The bare tank (without cap and tap etc) is available at $120 plus shipping. If you email me at goodpartsnz@gmail.com I can send you details including photos. Cheers Simon.
July 10th, 2020 at 8:17 pm
Starter clutch for a cb 650 luxury custom?
July 10th, 2020 at 11:53 pm
Sorry cant help with that one.
July 18th, 2020 at 9:12 pm
Hi after an exhaust system for a 2005 honda shadow or vt750 if you can help cheers
July 19th, 2020 at 11:11 am
Sorry cant help with that one.
July 21st, 2020 at 7:07 pm
Looking for starter clutch springs and plungers for a CB650LC
July 21st, 2020 at 10:48 pm
Hi Graeme. I have a starter clutch in stock that is missing one roller, but has all the springs and plungers. $80 plus postage. You can email me at goodpartsnz@gmail.com if you would like more details including photos. Cheers Simon
July 27th, 2020 at 5:37 pm
Hey mate I’m after a front fender for a 1999 Honda cb400. I was wondering if you had the part or knew where to get it in NZ.
July 27th, 2020 at 11:15 pm
Sorry I cant help with that one and haven’t sen any other wreckers advertising parts for that model.
August 17th, 2020 at 10:47 pm
Any chance you might stock a good 2004 vfr 800 stator.
August 18th, 2020 at 10:06 am
Sorry cant help with that one.
August 20th, 2020 at 11:31 am
After no,4 carb body
August 20th, 2020 at 3:34 pm
Sorry all sold.
August 22nd, 2020 at 11:16 am
Hi,I see you may have sum sp1 parts,do you have much left?
August 22nd, 2020 at 1:03 pm
Hi Steve. Very little left I’m afraid. Airfilters, clutch slave cylinder, coils, some relays, LH switch block, radiator fan, rear axle, rear shock linkage, solenoid, stator, overflow bottle. That’s about it. If you are interested in any of these, just email me at goodpartsnz@gmail.com and I can reply with details including photos. Cheers Simon
August 26th, 2020 at 3:44 pm
Hi do you have a gb500tt mirror please. Colin
August 26th, 2020 at 5:13 pm
Sorry cant help with that one Colin.
August 28th, 2020 at 10:59 am
Kia Ora
Do you have a front wheel for a Honda GB500 TT?
August 28th, 2020 at 7:13 pm
Sorry no.
November 23rd, 2020 at 8:44 pm
Hi Interested in some parts from gb500
Generator cap
Chrome pin that holds side cover on
Side covers depending if transfers intact
Headlight ring
Seat
November 23rd, 2020 at 9:20 pm
Sorry, I have very few parts remaining in stock for the GB400/500 and cant help with any of those on your list.
November 26th, 2020 at 10:17 pm
Wtb Exhaust and front wheel for honda shadow 2008
November 27th, 2020 at 8:25 am
Sorry cant help with those.
December 21st, 2020 at 2:53 pm
Hi have you got any GL1000 chrome exhaust trim for the mufflers , Cheers.
December 21st, 2020 at 4:22 pm
Sorry no.
January 11th, 2021 at 11:00 am
hi iam after a honda cbx 250 1985 switch block l/h side.. in realy good condition with no sun damage .. do you have one. also do you have a speedo assembly .and head light .. if you have can you send pics . thanks mark. Australia
January 11th, 2021 at 6:07 pm
Hi Mark. I may be able to help, but can you email me directly, at goodpartsnz@gmail.com and let me know if this is a CBX250F or a CBX250RS. Cheers Simon
February 8th, 2021 at 8:28 am
Hi,
I’m after seat parts and a compression cable for a 1986 Honda GB500 that I’m restoring. Is there anything available?
Cheers Paul
February 8th, 2021 at 12:34 pm
Sorry I cant help with those Paul. I have very few parts remaining from the GB400/500 currently.
February 19th, 2021 at 5:35 pm
Hi, I’m after a Honda CB750f/900 fuel tank. Do you have any in reasonable condition? Live in Christchurch area.
Thanks
February 21st, 2021 at 9:59 am
Sorry all sold.
February 26th, 2021 at 2:21 pm
Hi,
Just wondering if you have a rear wheel for 1998 honda 600 xlv transalp? (Or maybe a 97 might fit.)
Cheers Jen
February 26th, 2021 at 2:50 pm
Sorry I cant help with that one.
March 1st, 2021 at 7:36 am
Hi, I am looking fo a replacement rear rim
For my 1998 xl600v transalp.
17 x 2.50 32 spoke. Or a wheel even.
Can you help?
March 13th, 2021 at 9:25 pm
Hi there am after GB500TT sol seat
March 14th, 2021 at 10:26 am
Sorry I cant help with that one.
March 28th, 2021 at 11:48 pm
I am looking for 2004 vt750 shadow rear left indicator hoping that your may be able to help thank you
March 29th, 2021 at 5:48 pm
Sorry I cant help with that one currently.
April 24th, 2021 at 3:53 pm
Hi there I have a 89″ nsr250r mc18 and am doing a full restore what parts do you have available
April 28th, 2021 at 11:44 am
Hi Simon,
I’m looking for a Honda Firblade 04-07 side stand.
It is for my Aprilia Mille as apparently it is better than the one already fitted.
Regards,
Michael
April 28th, 2021 at 12:03 pm
Sorry I cant help with that one.
May 9th, 2021 at 9:08 pm
Honda vf750 magna. Would you have left and right brake and clutch units and handlebars for a 1986 magna
May 9th, 2021 at 11:25 pm
Sorry no parts in stock for the Magna. Cheers
May 19th, 2021 at 9:45 pm
Hi I’m looking for a cdi for xr500 1984
Do you have anything that might work cheers Ben
May 20th, 2021 at 8:55 am
Sorry I cant help with that one.
June 17th, 2021 at 7:20 am
Hi. I am looking for a brake and clutch levers for a 1984 Honda VF400F. Can you help? Thank you.
June 17th, 2021 at 9:16 am
Sorry I cant help with levers.
June 17th, 2021 at 11:30 am
That’s fine. Do you know who may be able to help
June 17th, 2021 at 12:24 pm
id suggest you buy new levers, as they are generally aftermarket and not expensive. Any motorcycle shop should be able to get these for you, or you may find them online.
July 7th, 2021 at 7:49 pm
Honda Cbr600fx1999
I am looking for back and or front indicators and both rear view mirrors.
Cheers
Ian
July 8th, 2021 at 1:00 pm
Sorry I cant help with those.
July 23rd, 2021 at 6:11 am
Hi there I’m after Honda GB400/500 forks or just the fork internals. Or if there is another Honda of the similar age that would share the same fork internals.
July 23rd, 2021 at 12:07 pm
Sorry I cant help with those. Cheers.
July 30th, 2021 at 6:13 pm
Hey there I’m looking for a ignition switch for a Honda cd250u 1988. Do you have anything like that? Cheers
July 30th, 2021 at 6:17 pm
Sorry I cant help with that one.
August 27th, 2021 at 12:22 pm
Hey I have a 1991 cbr 1000f and it needs new generation to charge battery. Or has anyone had same problem? Is there something that plays up on them that j sould loom at first
August 27th, 2021 at 1:16 pm
Could be the alternator/stator or could be your rectifier. Both are easy enough to check with a multimeter. If you have access to a multimeter, just google how to test either part and you should find enough info online.
September 20th, 2021 at 9:36 pm
Hay mate, after a few parts for the 1986 gb 500 you have listed. Am after the following.
Rh mirror.
Rh front indicator
Headlight assembly
September 20th, 2021 at 9:53 pm
Sorry very few parts remaining from the GB400/500 and I cant help with any of the parts you require. Cheers
September 30th, 2021 at 8:43 pm
Hi would you have front calapers for 1975 goldwing that are ready to fit also would you have a set of comstar wheels for said bike thanks
September 30th, 2021 at 8:50 pm
Sorry i cant help with those Trevor. The 75 Goldwing should have spoked wheels. Not sure if the 77/78 Comstars are a straight swap or not. Cheers Simon
October 1st, 2021 at 5:01 pm
Good day mate, Do you have a VTR1000 firestorm 2002 complete engine (working). How much will it cost
October 1st, 2021 at 9:02 pm
Sorry this has sold.
October 7th, 2021 at 10:14 am
Hey team,
I have a 2004 VTR 1000, needing oil case/housing as the one that came with it is cracked from previous owner..
October 7th, 2021 at 7:06 pm
Hi Jack. Is it the sump pan you need? I have one from a 1997 VTR1000 which is likely to be the same, at $100 plus postage. If you email me at goodpartsnz@gmail.com I can reply with details including a photo. Cheers Simon
October 23rd, 2021 at 12:25 pm
Hi there ,chasing carbs for a 1982 honda vf750 v4 sabre .
October 23rd, 2021 at 2:52 pm
Hi. I can supply a set of carbs for the Sabre at $150 plus postage. If you email me at goodpartsnz@gmail.com I will reply with details including photos. Cheers Simon
October 26th, 2021 at 6:18 pm
Hi, I’m looking for choke cables for a 650 honda bros, thanks Jon
October 26th, 2021 at 7:35 pm
Sorry I cant help with that one.
October 31st, 2021 at 2:01 pm
Hi there, after frame sliders and rear shock for 98′ 250 hornet
Cheers
November 1st, 2021 at 8:24 am
Sorry I cant help with those.
November 16th, 2021 at 5:19 pm
Hi. I’m after a headlight assembly for a Honda CRF250L, 2013?
November 16th, 2021 at 6:20 pm
Sorry I only deal in road model parts.
November 29th, 2021 at 1:32 pm
Will 1992 Honda rebel parts fit a 1996
November 29th, 2021 at 6:45 pm
Not sure but most likely. The rebel 250 I have in stock is rough and cut down into a bobber. If you think I may have parts you are looking for, please email the details to goodpartsnz@gmail.com.
December 23rd, 2021 at 10:18 am
Do you have a seat for a honda gb400
December 23rd, 2021 at 10:58 am
Sorry no
December 30th, 2021 at 3:33 pm
Hi, looking for a centre stand for Honda Transalp 650 2001 ? thanks
December 30th, 2021 at 6:53 pm
Sorry I cant help with that one.
January 22nd, 2022 at 6:45 pm
Do you have a seat for honda Gb 400
January 23rd, 2022 at 5:54 pm
Sorry no
January 26th, 2022 at 7:06 pm
Hi just wondering if use have a radiator for honda shadow 750cc?
Part # toyo 51601
That’s what’s on radiator I have at the moment. But I’m looking for replacement
Cheers
January 26th, 2022 at 10:40 pm
Hi Ray,
I have a radiator from a 2006 VT750C. Not sure what year your bike is, but if you can email me at goodpartsnz@gmail.com I will reply with details including photos. Cheers Simon
February 9th, 2022 at 10:45 am
I’m looking for a petcock for my cb650lc ( or a service kit) the thread on to petcock measures 19.60 ( but is probably a 20mm thread. The sealing disc in it measures 28mm ( or thereabouts)
Can you help?
February 15th, 2022 at 3:55 pm
Hi there, how much of the 89 cbr 1000 do you have left? Thanks!
February 15th, 2022 at 9:07 pm
I have dismantled a 1990, 91 and 92model but many parts have sold. It would be easier if you could let me know what parts you are looking for. You can email me directly at goodpartsnz@gmail.com
March 11th, 2022 at 1:22 pm
Hi I’m after a rear cowling and tail light for a nt400 bros if you have any
March 11th, 2022 at 4:43 pm
Hi Jamie. I will have a tail light in stock but not the rear cowling. If you email me at goodpartsnz@gmail.com I can send a photo for you to compare. Cheers
April 17th, 2022 at 10:46 pm
Hi, do you have a fuel tank for a Honda 750 cbx?
April 19th, 2022 at 9:54 am
Hi. Yes I have one fuel tank in stock from a CBX750 FII. Its has been painted white and then sanded back ready for repainting. Straight and no rust issues. $150 plus shipping. If you email me at goodpartsnz@gmail.com I can reply with details including photos. Cheers Simon
April 18th, 2022 at 2:55 pm
Hi I’m after a Front brake lever for a 1981 Cb250rs if you have any. or CB 250 N
April 19th, 2022 at 9:52 am
Sorry I cant help with that one.
April 21st, 2022 at 4:24 pm
After parts from the 1986 VFR 750 please. What is available?
April 22nd, 2022 at 9:49 am
Hi David. Not a great deal left from the early VFR750 and 700 model. If you email me at goodpartsnz@gmail.com I can reply with a list of parts that are in stock. Cheers Simon
April 29th, 2022 at 11:32 am
Honda CBF250 Hornet 1996
Hi there was after a quote for a speedometer for the bike above please?
April 29th, 2022 at 1:09 pm
Hi Ollie. I can supply a complete dash assembly for the Hornet 250 at $150 plus postage. Good tidy order with a thin crack in the outer casing which is easily welded/glued if required. Please email me at goodpartsnz@gmail.com for more details including photos. Cheers Simon
May 15th, 2022 at 7:10 pm
Honda XL 350 1975 what engine parts do you have and chain guard and. Guide tail light bracket ?
May 16th, 2022 at 9:55 am
Hi Karl,
I have very few parts remaining for the XL350.
I have a few parts that came with a large parts lot from another dismantler, so I don’t know what year these came from. I have a crankshaft with con rod, engine bash plate, bottom triple clamp, clutch basket, and a speedo drive. That’s about it I’m afraid. If you may be interested in any of these, please email me at goodpartsnz@gmail.com
May 25th, 2022 at 10:07 pm
Hi, I’m chasing a fuel tap for a Honda MVX 250.
May 26th, 2022 at 10:23 am
Hi Paul,
I should have one in stock. Please email me at goodpartsnz@gmail.com and I can then provide details.
May 26th, 2022 at 10:52 am
Hi,
That 87 CBR400 Aero that is in stock wouldn’t happened to have the “split” mirrors like the 86 aero would it?
Thanks
May 26th, 2022 at 11:48 am
Sorry all sold
June 20th, 2022 at 3:22 pm
Hi mate,
I’m looking for the speedo meter and left handle switch for my 2013 cbr 1000 rr. How much for them please?
Cheers
Aiden
June 20th, 2022 at 10:31 pm
Sorry I cant help with those.
August 2nd, 2022 at 12:25 am
2003 honda shadow 1300
footpegs? price
fuelpump relay? price
August 2nd, 2022 at 1:27 pm
Sorry I cant help with those.
August 3rd, 2022 at 8:22 am
Hi there, looking for an ignition switch for a 1087 VFR400 NC21, its a 6 wire connector.
August 3rd, 2022 at 7:16 pm
Hi Mike. I have an ignition switch with key from an NC21 in stock. The switch works fine, but either he switch internals or the key are worn, so the key can be taken out when the ignition is in the ON position. This is available at $40 plus postage and if you are interested, please email me at goodpartsnz@gmail.com Cheers Simon
October 8th, 2022 at 11:08 pm
Would you have a tachometer and a brake master cylinder for my Honda CB 900F 1980 bike by any chance please.
I’m in Ashburton at the moment but I live in Western Australia.
October 9th, 2022 at 8:28 pm
Sorry I cant help with those. Cheers
November 4th, 2022 at 7:10 pm
After battery covers for 1999 vt750 please
November 4th, 2022 at 8:15 pm
Sorry I cant help with that one.
January 2nd, 2023 at 11:13 pm
Hey mate looking for rear tail fairing and back lights for my honda cbr 1000rr
January 3rd, 2023 at 7:50 am
Sorry I cant help with parts for that model.
January 30th, 2023 at 11:42 pm
Hi after the ‘H’ frame bracket that the mirrors attach to for a Honda cbr250rr mc22, cheers
January 31st, 2023 at 8:29 am
Sorry all sold.