Below is a list of Suzuki motorcycle models currently in stock. Some models may have all the motorcycle parts available, some may only have a few parts left.
Email us on goodpartsnz(at)gmail(dot)com for any enquiries. We ship anywhere in New Zealand, Australia and other international destinations
Suzuki Motorcycles
| Make | Model | Year |
| Suzuki | GSXR250 | 1987-90 |
| Suzuki | VS800 | 2008 |
| Suzuki | Cavalcade | 1986 |
| Suzuki | GN250 | 1986-2007 |
| Suzuki | GSXR400 | 1985 |
| Suzuki | RG250 | 1982-1986 |
| Suzuki | GSX400F | 1982 |
| Suzuki | Impulse | 1987 |
| Suzuki | GS450 | 1980 |
| Suzuki | GSX400E | 1987 |
| Suzuki | GS500E | 1990-1997 |
| Suzuki | GSX250 Invader | 2003 |
| Suzuki | Katana 750 | 1983 |
| Suzuki | GSXR250 | 1989 |
| Suzuki | GSX750ESG | 1989 |
| Suzuki | Impulse SX | 1987 |
| Suzuki | GSX600F | 1990 |
| Suzuki | GS750 | 1978 |
| Suzuki | GSX400E | 1982 |
| Suzuki | GN250 | 2006 |
| Suzuki | GSX1400 | 2001 |
| Suzuki | GSF Bandit 250 | 1997 |
| Suzuki | GSXR750 | 1986 -1987 |
| Suzuki | RF900 | 1995-2000 |
| Suzuki | GSX1100F | 1987 |
| Suzuki | GSXR1100W | 1995-1999 |
| Suzuki | GSF1200S Bandit | 2001 |
| Suzuki | GSX250 Across | 1990 |
| Suzuki | GS550 | 1979 |
| Suzuki | VS700 | 1988 |
| Suzuki | GSXR1100L | 1989 |
| Suzuki | GSF250 Bandit | 1992 |
| Suzuki | RGV250 | 1989 |
| Suzuki | GSX250 Across | 1990 |
| Suzuki | VL250 Intruder | 2008 |
| Suzuki | 650 Savage | 1988 |
| Suzuki | GSXR400 | 1989 |
| Suzuki | SV1000 | 2004 |
| Suzuki | VS700 | 1988 |
| Suzuki | TL1000 | 1997 |
| Suzuki | GT750 | 1976 |
| Suzuki | SV650S | 1999 |
| Suzuki | GN400 | 1987 |
| Suzuki | GSXR750K | 1989 |
| Suzuki | GSX750F | 1990 |
| Suzuki | GSR600 | 2007 |
| Suzuki | GT550 | 1975 |
| Suzuki | GT125 | 1975 |
| Suzuki | GT185 | 1975 |
| Suzuki | T125 | 1972 |
| Suzuki | GS850 | 1979 |
| Suzuki | GSX750 | 1980 |
| Suzuki | GSXR1300 Hayabusa Gen 2 | 2008 |
| Suzuki | GS1100G | 1985 |
| Suzuki | GSF400 Bandit | 1990 |
| Suzuki | GSX400F | 1991 |
| Suzuki | GSXR400 | 1986 |
| Suzuki | VL1500 | 2003 |
| Suzuki | GZ250 | 2003 |
| Suzuki | GSX1100 FJ | 1988 |
| Suzuki | GSXR250R GJ73A | 1989 |
| Suzuki | GSX750 Katana | 1984 |
| Suzuki | GSX550 | 1983 |
| Suzuki | GSX750F | 2001 |
| Suzuki | M109R | 2016 |
| Suzuki | Rf400 | 1995 |
| Suzuki | SV650 | 2001 |
| Suzuki | SV1000 | 2003 |
| Suzuki | SV1000 | 2006 |
| Suzuki | DL1000 | 2008 |
| Suzuki | VL800 | 2012 |
| Suzuki | VL1500 | 2007 |
| Suzuki | GSX650F Bandit | 2008 |
| Suzuki | Bandit 1250 | 2007 |
| Suzuki | GSX1300R Hayabusa | 2003 |
| Suzuki | GSXR750W | 1994 |
| Suzuki | VZ800 | 2013 |
| Suzuki | GSXR400R | 1990 |
| Suzuki | GS550L | 1984 |
| Suzuki | GS650 Katana | 1982 |
| Suzuki | TL1000R | 1998 |
| Suzuki | GSF1250 Bandit | 2007 |
| Suzuki | GSF650 bandit | 2008 |
| Suzuki | DL1000 Vstrom | 2008 |
| Suzuki | DL6500 Vstrom | 2007 |
| Suzuki | VZ800 | 2012 |
| Suzuki | GSXR1000 K4 | 2004 |
Good Parts Motorcycle Dismantlers 
April 21st, 2011 at 12:24 pm
Hi, I was wondering if you have a head for a suzuki gn250?
Cheers, Iain
April 21st, 2011 at 9:43 pm
Hi Ian.
I think you have contacted me directly on this one, some time back. I did send you an email at the time, but have re-sent it this evening, in case you didnt get the original. I can supply a complete head from a low mileage 2005 GN250 at $250 including postage. Cheers Simon
March 18th, 2023 at 1:37 pm
Good afternoon , do you have a cdi for a 2003 suzuki gsx 250 invader…
March 18th, 2023 at 5:28 pm
Sorry all sold. These are hard to find as they are a very common issue with this model. Cheers
August 20th, 2022 at 1:28 am
Hi I’m looking for a left front foot peg assembly full exhaust preferred 2 into 1 all the dash trim and speedo trim for a 1985 pop up 750 katana I’m in Australia please let me know what you have and price please
August 20th, 2022 at 10:06 am
Sorry I cant help with those. very few parts in stock for that model now.
September 13th, 2022 at 10:20 pm
Hi there I’m looking for a fuel tap and LH mirror for my 2008 Suzuki gsx 250 invader how much thank you here is my contact number 0221316314
September 14th, 2022 at 10:14 am
Sorry William, mine have all sold.
November 8th, 2022 at 8:03 pm
Hae mate I’m after a right hand side mid faring and belly pan for a 04 gsx invader
November 8th, 2022 at 9:00 pm
Hi Ian. I can’t help with a head, but I do have a bare engine (without carb and starter) with only 6000km on the clock at $500 plus shipping. If you’d like further details, you can email me at goodpartsnz@gmail.com Cheers
January 2nd, 2023 at 2:55 pm
Hi do you have a wiring loom for a suzuki gsf250 bandit
January 2nd, 2023 at 5:48 pm
Sorry all engines have sold
May 8th, 2011 at 2:40 pm
hi i was just wondering if you had a swing arm for a 1990 bandit 250
thanks
March 16th, 2022 at 11:52 am
Im after a starter motor for a 2008 suzuki vl250 intruder
March 16th, 2022 at 8:39 pm
Sorry I cant help with that one.
May 8th, 2011 at 2:48 pm
can you please reply to my email?
August 23rd, 2022 at 6:45 pm
Hi I am after a set of coils and leads for a 1989 gsxr250r, or most 4 cylinder 250s have similar if not the same coils.
Cheers
Ken
August 24th, 2022 at 9:54 am
Sorry I cant help with those currently. The GSXR250/400 and bandit 250 use the same or similar coils but mine have all sold
May 22nd, 2011 at 8:05 pm
Hi,
I am looking for a stator rotor rect setup to make a very slim alt. GN 250 / 400 has a stator 102mm in dia which may work. I would like the cost of the three parts please other stators arround that size off other machines may also work for me. I need 30 + amps I am guessing that these are 18 pole and should exceed amps required.
Thanks
Allan
May 22nd, 2011 at 9:35 pm
Hi Allan.
I dont have a GN250 stator and rotor currently, but will measure up a couple of others as I think they be even smaller. I will email you direct with some details. Cheers Simon
April 23rd, 2022 at 8:37 pm
Hey im in need of a 1987 gsxr 250 choke cables the 1 that splits two ends cheers
July 12th, 2022 at 7:08 am
Hi was wonding if you have a topend/head off a savage 1988 650 lookin at upgrading my 400 if so how much pls
June 14th, 2011 at 4:03 pm
Hi i’m lookin for a GN 250 engine to match an ’86 model, the original has been run dry/no oil so the pistons and suchlike have been completely trashed, maybe i just need a top end of the engine? Any help appreciated,
Cheers Lewin
June 14th, 2011 at 9:23 pm
Hi Lewin.
I have the perfect engine for you. I have a 2006 GN250 engine with a genuine 7000km on the clock. The bare engine is available minus the stator coils and rotor and the gear indicator sensor (yours will bolt straight on). The later engines will bolt straight into your earlier frame and are compatable with all earlier wiring and electrics. Email me at goodpartsnz@gmail.com and I can supply you more details including photos and pricing. Cheers Simon
June 15th, 2011 at 2:03 pm
Hi Simon, I’m looking for a R.H.S footpeg mounting plate for a RF900 ’95
I may also get a number of other parts if you have a RF in stock
June 15th, 2011 at 3:00 pm
Hi Jason. Sorry I dont have a RH footpeg hanger available for the RF900. I do have quite a few parts avaiolable from this model, but the RH Footpeg hangers have been sold. Please let me know what other parts you may require and I will help if I can. Cheers Simon
September 21st, 2020 at 10:42 am
Hi there,looking for a speedo for an ’83 gs650g.Thaanks,Karen
September 21st, 2020 at 10:57 am
Hi Karen.
The only speedo I have in stock has a broken needle. Cheers Simon
September 24th, 2011 at 10:33 pm
Hi im after Suzuki GSX 750 side cover for the points its a little round one with suzuki on it and a adjustable break lever if you have them? cheers
November 8th, 2011 at 11:52 am
hi do you have an exhaust management motor for a 2008 Suzuki
M109 Boulevard
November 13th, 2011 at 5:15 pm
Gidday do you have a gs1200ss 2004 caberrattor/s what sort of price
November 13th, 2011 at 8:22 pm
Sorry cant help with those currently.
December 6th, 2011 at 9:46 am
After an instrument assy on a GSF 250 1995, not too worried about exterior as long as instruments are still working. Even older model if they are somehow compatable. Thanks Shawn
December 11th, 2011 at 3:30 pm
Hay was wondering if us have a running gsxr250 engine
December 13th, 2011 at 6:08 pm
Hi Jim. Sorry nothing available currently. I have just got a 1989 GSXR250 in and while the engine starts ok, it smokes, so will need work. Cheers
December 11th, 2011 at 8:02 pm
Suzuki GSX400F 1982 hi just woundering if you have a good stator for this still cheers
December 13th, 2011 at 6:11 pm
Hi Scott,
I have a parts engine, but think the stator has been sold. Will check for you this week. email directly at goodpartsnz@gmail.com Cheers Simon
December 27th, 2011 at 9:24 am
2004 suzuki gsx 250 invader fairings the front and the left hand side. cheers
December 27th, 2011 at 8:56 pm
Hi Nick.
I have a GSX250 Invader in stock and think the LH side fairings are in good order. Front upper fairing is damaged, but cant recall if its repairable. These fairings are now quite hard to come by and are not available new from Suzuki any longer. I am about to head away on holday for a few days, but email me directly at goodpartsnz@gmail.com and i will get back to you with more details after I return. Cheers Simon
February 15th, 2012 at 11:55 am
Hi there – I see you have an 01 Bandit 1200S in stock – I am after an airbox, from top cover and bit that mounts onto the carbs. Can you oblige please????????
March 15th, 2012 at 7:10 pm
hi there i am looking for a complete carbs set for 1991 suzuki GSXR250.
cheers
March 15th, 2012 at 10:18 pm
Hi Peter,
Sorry dont think I can help with those currently. Cheers Simon
March 18th, 2012 at 9:29 pm
Hi, I am looking for a motor for a 2001 GSF1200s please.
April 20th, 2012 at 4:12 pm
Hi, I am wanting a side cover for a Suzuki gn 250. It is the bike’s right side. The bike is red. Please give a price if you have one and how much to mail to Kaiapoi? Thanks for your help! Greg
April 22nd, 2012 at 7:48 pm
Hi Greg.
I dont have a red sidecover, but may have a RH sidecover from a GN250 in another colour that you could repaint. Let me know if your interested and you can email me at goodpartsnz@gmail.com Cheers Simon
April 20th, 2012 at 9:57 pm
hi wondering if you have a magneto for a gsxr 250 1990 gj72 also a set of carbs if possible cheers
April 22nd, 2012 at 7:50 pm
Hi Cameron.
Sorry but I think I have sold my last Stator rotor for the GSXR250. They seem to be in demand and sell quickly. I do have the stator coils if you need them, but not the rotor itself. I can supply a set of carbs at $100. You can email me at goodpartsnz@gmail.com Cheers Simon
May 6th, 2012 at 2:39 am
do you have forks that are not too rusty to be resealed. And a tail light for a 1983 gsx 750 ?
May 14th, 2012 at 5:39 pm
Hi There,
I am looking for a fxr150 rear faring (preferably green) for a 2001 fxr150.
Do you have any of these?
Thanks,
Scott
May 14th, 2012 at 7:27 pm
Hi Scott, sorry cant help with FXR150 parts currently. Cheers
July 6th, 2012 at 10:36 pm
hi
I see you have a 2001 gsf1200 in stock. do you have the carbs and intake manifolds?
Cheers
Jason
July 6th, 2012 at 11:30 pm
Hi Jason. Yes these are in stock and I have replied to your email directly. Cheers Simon
July 8th, 2012 at 11:45 pm
Hi, I’m looking for a clean pair of 4 pot Suzuki Bandit 1200 front calipers suit ’95-’00 models.
i will be fitting them to a ZX7r Kawasaki and believe the bolt spacing is the same at 90mm.
Can you help?
Thank you, Lance
July 9th, 2012 at 9:15 pm
Hi Lance. I dont have any from the Bandit, but I do have a pair from an RF900 which should be the same. Email me directly at goodpartsnz@gmail.com and I will send photos and can get measurements if required. Cheers Simon
July 22nd, 2012 at 2:55 pm
Hi, I’m repairing a stolen/recovered 2004 gsx250. At this point I am looking for a brake lever and an ignition setup. May also be after front forks depending on engineers opinion. Am open minded as to using other parts and making them fit if need be, but would not say no to something that bolts on. Any help greatly appreciated.
July 22nd, 2012 at 9:19 pm
Hi Matt,
I have dismantled a couple of these. I cant help with a brake lever but new aftermarket levers are quite cheap. Should be able to help with an ignition switch and key at $80. email me directly at goodpartsnz@gmail.com Cheers Simon
September 24th, 2012 at 5:28 pm
hi, i was wondering if you had the front left foot peg bracket that will fit a 1990 gsx1100f, thanks
September 24th, 2012 at 8:59 pm
Hi Jon,
I have dismantled a GSX1100F but the LH footpeg bracket has sold. Cheers
November 2nd, 2012 at 3:02 pm
Do you have the 2 inserts on the left side of the faring for the Suzuki RF900R (the ones with the fins) I have a RF600R but they look they same.
November 2nd, 2012 at 9:56 pm
Hi Jason.
I think I only have the lower LH grill panel available. It will need some plastic welding before repainting. If you email me directly at goodpartsnz@gmail.com I can send a photo. Cheers Simon
November 4th, 2012 at 11:50 am
Email sent. I am keen as on parts for this bike.
December 12th, 2012 at 12:53 am
Hello,
Do you have a speedometer for Gsf 250 1992?
Thanks
Regards,
Lucas
December 13th, 2012 at 9:20 pm
Hi Lucas. Sorry cant help with that one currently. Cheers Simon
December 16th, 2012 at 3:18 pm
Hi There,
Would you by chance have a front brake switch for a Suzuki gs500E – 1991?
Also, do you have a right hand side engine cover for the same bike?
Many thanks,
Dave
January 28th, 2013 at 8:06 am
Hey I’m looking for a 1983 gsx400e left hand side cover (or the pair, the right hand could use replacing too if the fasteners are all there on the new one). The 1982 up in that list would do well, as would the 1987. Do either of these bikes still have their side covers intact?
Thanks,
Erich
January 28th, 2013 at 9:21 pm
Hi Erich,
sorry but all LH sidecovers have sold. Curerentkly I onoly have a single RH cover with one tab missing. If your sidecovers have a lug missing, these can generally be replaced by a plastic welder. Certainly worth asking. Cheers Simon
January 29th, 2013 at 4:21 am
Thanks for the quick reply. I managed to find a place that has them, presumably aftermarket brand new.
If anyone else happens to need them, you can send them here: http://www.cmsnl.com/products/cover-frame-lh_4721144400/ . They aren’t cheap with the shipping, but when they’re on my bike they’ll be worth it!
Cheers,
Erich
January 29th, 2013 at 9:30 pm
Thanks Erich, the link could be handy for others who own this model.
Cheers Simon
February 4th, 2013 at 9:04 pm
Hi there, I’m after the some parts for a 1987 GSX 400 E. Looking for a front Brake Line, relay and possibly some other parts.
February 5th, 2013 at 9:58 pm
Hi Kam,
I should be able to help with most parts for that model, so email me directly at goodpartsnz@gmail.com and let me know what parts you may require. Cheers Simon
February 6th, 2013 at 5:58 pm
Hi Simon I have emailed you twice as I forgot about another part I was after. Cheers
February 5th, 2013 at 1:13 pm
Hi, Im after an upper stay, a LH handle bar and both mirror/indicators for a GSXR 600, 2007. Many thanks
February 5th, 2013 at 9:46 pm
Hi Blake. Sorry no parts for that model in stock currently. Cheers Simon
March 3rd, 2013 at 12:44 pm
Hi I’m after the stainless exhaust cover which hides the joint at the header pipe for a 2000 gsf600 bandit
March 3rd, 2013 at 8:29 pm
Hi Peter, sorry cant help with that one. Cheers Simon
March 14th, 2013 at 5:55 pm
Hi, I’m after a clutch lever and lever assembly, LF indicator, rear shock and a red left frame cover panel for 2005 gn250. Do you have any of these in stock? Cheers.
March 14th, 2013 at 10:27 pm
Hi Brad. I should be able to help with some of those. I have a clutch lever assembly from an early GN250 which will be identical to the later models. Will need to check its in good order, but if it is your looking at $35 for the complete assembly including lever. I should also have an indicator unit in tidy order at $40. Cant help with a rear shock but I do have a new LH side cover. Email me directly at goodpartsnz@gmail.com and i will check out the parts and send you photos. Cheers Simon
March 14th, 2013 at 5:58 pm
Hi im after front fairings for a 88′ gsx600f
April 14th, 2013 at 3:49 pm
Hi there do have a rear brake light for a 1982 gsx 1100E? cheers Don.
April 14th, 2013 at 9:24 pm
Hi Don. I may have a tail light but I am away for a few weeks and cant confirm until after i return. Email me at goodpartsnz@gmail.com and i will reply on my retur. Cheers Sinon
April 20th, 2013 at 1:25 am
hi there i am looking for magneto rotor for gsxr 250 1988
April 21st, 2013 at 9:07 am
Hi James. Sorry cant help with that one currently.
May 10th, 2013 at 12:29 am
DL1000 Suzuki 02 – 09 Rear Shock ?
May 10th, 2013 at 7:20 pm
Sorry no DL parts currently
May 18th, 2013 at 8:06 pm
Hi Simon, I’m currently looking into getting parts for a GSXR 250 1988-1989, particularly a stator, right side fairings(1988), right side indicators, altenator and possibly carbs.
Do you have any of these parts?
Thanks,
Jeremy.
May 19th, 2013 at 7:23 pm
Hi Jeremy. I will have a RH fairing panel in stock and possibly indicators (depending on what type). Sorry no carbs available currently. I may also be able to help with a stator coil assembly and a stator rotor. Please email me directly at goodpartsnz@gmail.com if you would like and further details. Cheers Simon
June 2nd, 2013 at 12:05 pm
Hi Simon,
I’m looking for a speedometer for a 1984 GSX400E. Do you have any in stock at the moment. Cheers
June 2nd, 2013 at 10:48 pm
Hi Kamran, Yes I should be able to help with that one. Email me at goodpartsnz@gmail.com and let me know if its just the speedo you need or a complete dash. From memory these are a one piece dash, rather than separate instruments. Cheers Simon
June 8th, 2013 at 9:39 pm
hi simon do you have quad mikuni carbs along with inlet rubbers off a gsx400 that will fit an 87 impulse engine, i brought the engine off you a few years back and have never been able to get it running right (going to have one last shot at it) im presuming its electrics/carburetor, and have been told i cant buy parts for the original asian twin throat carbs, hence the reason im sourcing the mikuni type, plus i need the electrics, im sure mine are fine just need to eliminate the problem. or if you have some asian twin throat carbs with airbox that you are positive a running good i mite be keen on those
June 9th, 2013 at 8:03 pm
Hi Dean, dont think I can help but I will email you directly. Cheers Simon
June 13th, 2013 at 3:17 pm
Por casualidad tienen un carburador de la suzuki NZ 250S año 1986
June 13th, 2013 at 10:09 pm
Sorry no
June 19th, 2013 at 4:15 pm
hi do you have a front fairing or any other fairings for a suzuki invader 2004 gsx
June 19th, 2013 at 9:42 pm
Hi. I have a main upper front fairing but it will require plastic welding repairs, also a LH fairing side p[anel and the LH lower or belly panel. All require some repairs. If you email me at goodpartsnz@gmail.com I can email photos and more details. Cheers Simon
July 30th, 2013 at 3:31 pm
Hi im after a set of 1989 Suzuki gsxr1100 forks.
cheers Gordon
July 30th, 2013 at 10:50 pm
Hi Gordon, sorry cant help with those. Cheers Simon
August 7th, 2013 at 10:13 am
Hi, I am after a ignitor unit for the 1989 Suzuki VS750. Cheers
August 7th, 2013 at 9:23 pm
Hi Peter. I can supply a CDI from the VS750 at $140. Please email me at goodpartsnz@gmail.com for futher details. Cheers Simon
August 8th, 2013 at 5:00 pm
Hi Simon, had emailed you with a photo of the CDI for comparison. Cheers
August 14th, 2013 at 9:26 pm
Hi,
I am looking for parts for a Suzuki GN125h. I am guessing gn250 parts fit on here as well? (or maybe other bikes too)
I am not picky at all and don’t necessarily need stock suzuki parts. As long as they are in good condition and fit, that’s good enough for me.
I am looking for front indicators and mirrors, headlight (whole unit), break lever.
thanks in advance
Matthias Smink
August 14th, 2013 at 10:36 pm
Hello, I am after a Hub Drive for the speedo on a GN250
August 15th, 2013 at 9:18 pm
Hi. Yes I can supply a GN250 speedo drive at $40 plus postage. Email me at goodpartsnz@gmail.com if you are interested. Cheers Simon
August 25th, 2013 at 10:50 am
Hi there I currently own a 2003 gsx 250 invader and would like to know what fairing kits would be compatable with mine. The fairing I’ve got has a few dings and scratches. I am deciding if buying a kit would be cheeper than repairing the fairing. Cheers Ian
August 25th, 2013 at 10:21 pm
Hi Ian,
I dont know if any other fairing kits would be suitable for your GSX250 Invader. I do know that the bodywork for this model in no longer available from Suzuki and fairing parts are getting hard to come by. Repairing your factory fairing would be the best option in my opinion. Cheers Simon
August 25th, 2013 at 10:52 am
I am also looking for a spedometer for my ’03 gsx 250
Cheers Ian
August 25th, 2013 at 10:24 pm
Hi again Ian,
I should be able to help with a speedometer for your bike. Email me directly at goodpartsnz@gmail.com and I will check my inventory for you.
September 8th, 2013 at 9:24 pm
Hi, Am looking for a tank for a GSX 250/400 or GS450? or anything that will fit, not too fussy, turning an old GS450 into a Café racer, so willing to work with pretty much anything? Cheers Laurie
September 9th, 2013 at 9:56 pm
Hi Laurie,
yes I can help with that one and have a couple of options. Please email me directly at goodpartsnz@gmail.com and I can then send photos and further details. Cheers Simon
September 13th, 2013 at 8:44 am
Hi I’m wondering if u would have a cdi ignition box for a 1982 Suzuki gsx 400x impulse thanks.
September 13th, 2013 at 10:09 pm
Hi. I have an aftermarket CDI for the Impulse and this is available at $150. If you would like more details please email me directly at goodpartsnz@gmail.com Cheers Simon
October 25th, 2013 at 12:33 pm
HI, Do you have a 1997 Suzuki RF900 rear brake light switch (operated by front right hand brake lever OEM 57460-17C01) ?
October 26th, 2013 at 7:31 am
Hi Les, sorry cant help with the switch but these will be available new from Suzuki. Cheers Simon
November 27th, 2013 at 3:43 pm
Do u hv any gsxr 750 k1 parts
November 27th, 2013 at 8:28 pm
Sorry no
November 29th, 2013 at 12:26 am
Hi there I need parts for 1985 gsf 250
November 30th, 2013 at 7:48 am
Hi Vish,
I have dismantled seveal of the early GSF Bandit 250 models (GJ74A) but this model didnt commence until 1989. Either our bike is not a 1985 model or you have the model details incorrect. You can email me directly at goodpartsnz@gmail.com and possibly send me a photo of your bike. Cheers Simon
December 5th, 2013 at 2:41 pm
Hi ave you got side covers for gn250?
Thanks
December 6th, 2013 at 8:05 pm
Hi. what side do you need or do you need a pair and do they have to be a specificcolour. You can email me directly at goodpartsnz@gmail.com
December 5th, 2013 at 7:33 pm
Just wondering if you have the front and right side fairings for a 2003 gsx250 invader, and if so, how much
December 6th, 2013 at 8:07 pm
Hi Arnie,
sorry cant help with those and they are getting very hard to come by now. Suzuki havent made new bodywork panels for this model for a few years now. Cheers Simon
December 14th, 2013 at 3:34 pm
rf900 grab rail – do you have one? (blk))
December 14th, 2013 at 7:13 pm
Hi dave,
yes I can supply a pillion grab rail in tidy order at $80. You can email me at goodpartsnz@gmail.com for more details. Cheers Simon
January 2nd, 2014 at 9:35 am
hi. do you have a top triple clamp + bar clamps + bars + throttle cables + bar end weights to suit a 1200 bandit? im wanting to convert my gs1200ss to proper bars
cheers
January 2nd, 2014 at 7:49 pm
Hi Jason. Yes I should be able to supply all the parts you mentioned except
the bar end weights. You can email me directly at goodpartsnz@gmail.com
for further details. Cheers Simon
January 13th, 2014 at 10:26 am
hey mate have you got a stator for a gsxr750 k6?
January 13th, 2014 at 11:12 pm
Sorry Hayden cant help with that one. Cheers Simon
January 15th, 2014 at 4:04 pm
I’m after front indicators and mirrors for a 1989 gsxr-250 can you help?
January 15th, 2014 at 10:00 pm
Hi Mike.
If these are the fairing mounted type indicators, I should be able to supply a pair and I also have a pair of mirrors although they will be after market types. If you email me directly at goodpartsnz@gmail.com I can supply photos and further details. Cheers Simon
January 27th, 2014 at 10:04 pm
Hi iam looking for suzuki gsx 1985-1987 model complete engine
January 27th, 2014 at 10:27 pm
What model GSX?
February 4th, 2014 at 7:32 pm
hey was wondering if you have a reg/rec for a gsxr k6 750/600
February 4th, 2014 at 9:49 pm
Hi Hayden,
sorry no parts for that model in stock. I have some from other Suzuki models which may be suitable. If you can email me with a photo to goodpartsnz@gmail.com I will see if I can help. Cheers Simon
March 9th, 2014 at 11:41 pm
Hey do u have rims and or tyres for a gsxr 250?
March 13th, 2014 at 9:40 pm
Hi Clinton. Yes I have a set of wheels with new tyres in stock. email me at goodpartsnz@gmail.com Cheers Simon
March 13th, 2014 at 6:47 pm
Hey there, i need a tail light assembly for a gsx 250 invader. I also need a subframe and a front wheel AJR J17 MT 3.0
THANKS
Clinton
March 13th, 2014 at 9:42 pm
Hi again Clinton. I can supply a tail light assembly for the GSX250 Invader at $70. Cant help with a front wheel or subframe. email me at goodpartsnz@gmail.com for more details. Cheers Simon
March 24th, 2014 at 9:08 pm
Hi Simon, any chance of having a clutch cable for a B120? Maybe in the bin labelled old!!
Cheers Cameron.
March 24th, 2014 at 9:46 pm
Hi Cameron,
sorry nothing like that in stock. I had a large number of cables but nothing was labelled so they have all gone out I’m afraid
April 10th, 2014 at 1:48 pm
Hi,
I’m looking for left front parts for a Suzuki GS1200SS. Can you help?
Cheers, Mike.
April 10th, 2014 at 9:13 pm
Sorry cant help with those currently.
May 9th, 2014 at 9:05 pm
Hey there, do u have chain tensioners for a gsx 250 invader
May 11th, 2014 at 7:46 pm
Hi Clinton. yes have these in stock and have sent you an email directly. Cheers Simon
May 21st, 2014 at 9:19 am
Hi there,
Do you have the clutch lever for a GSF1200S Bandit
May 21st, 2014 at 9:41 pm
Sorry cant help with a clutch lever. Cheers
May 23rd, 2014 at 2:27 am
Hi there,
Do you have an ignition barrel/key set that would fit a 2002 GSF600S Bandit? My key will no longer turn, therefore I am unable to start the bike. 😦
May 23rd, 2014 at 7:06 pm
Hi. I have an ignition switch with key from a 2001 Bandit 1200S which should be the same. email me directly at goodpartsnz@gmail.com and I can provide more details including a photo so you can compare. Cheers Simon
May 23rd, 2014 at 7:56 pm
Hi Simon,
Thanks for the reply.
I’d certainly appreciate more details/photo, yes. I’m pretty sure the 600 and 1200 models have some interchangable parts, and the barrel being one of them. However, it’s good to check, just in case.
I look forward to your reply. 🙂
Jase!!!
June 28th, 2014 at 7:13 pm
Good day Simon. I am looking for the headlights of a gsx 250 invader. Pls let me know if you still have them avail.Cheers Ian
June 29th, 2014 at 7:54 pm
Hi Ian,
yes I can supply the headlights at $100/pair. Just email me directly at goodpartsnz@gmail.com
Cheers Simon
September 16th, 2014 at 2:15 pm
Any early 80’s GS450 parts. Not looking for engine parts just other bits and bobs.
September 16th, 2014 at 10:43 pm
Hi Joe, yes I have some GS450 parts in stock. Email me directly at goodpartsnz@gmail.com and let me know what you are looking for. Cheers Simon
November 11th, 2014 at 9:07 pm
Hi,
Looking for a RH carb off a suzuki gt125.
Thanks
Anthony
November 11th, 2014 at 9:30 pm
Hi Anthony. I should be able to help with that one. Please email me directly at goodpartsnz@gmail.com and I can send photos. Cheers Simon
December 2nd, 2014 at 9:53 am
Hi, I am looking for right side blue indicator fairing and the lower right hand side for suzuki gsx invader 250
December 2nd, 2014 at 9:32 pm
Hi Peter. I have the two RH side panels in Silver but both will need some plastic welding repairs. Fairings for this model are quite hard to come by as Suzuki stopped making them some years back. If you email me directly at goodpartsnz@gmail.com I can send photos if you are interested. Cheers Simon
December 7th, 2014 at 7:51 pm
Any suzuki gsx250 2003 blue fairings? Thanks
December 7th, 2014 at 9:32 pm
Sorry no
December 8th, 2014 at 11:16 pm
any gsx250 fairings at all?
December 21st, 2014 at 1:44 am
Hey looking for a Suzuki a100 exhaust header pipe and exhaust clamp that connects the header pipe to the motor.
Thanks
December 21st, 2014 at 5:25 pm
Sorry cant help with that one Daniel. Cheers Simon
January 4th, 2015 at 10:41 am
Hi Simon, I’m looking for a radiator off a Gsxr1100W, any in stock? Cheers, Dan
January 20th, 2015 at 1:20 pm
Hi, I am looking for a front suspension (just the pipe) only 1 and 1 rear shock. The bike is a Suzuki GZ250, Vin number: JS1AR121300100043. Cheers Max.
January 20th, 2015 at 9:56 pm
Hi Max,
sorry no parts for that model in stock currently.
January 20th, 2015 at 9:20 pm
Hi Simon,
Was wondering if you had any GN250 mufflers in stock?
Thanks,
Katherine
January 20th, 2015 at 9:56 pm
Hi Katherine. Sorry no suitable mufflers in stock currently. Cheers Simon
January 21st, 2015 at 1:11 pm
Looking for a starter motor for a GSX400 – any year between 1979—1987
January 21st, 2015 at 10:21 pm
Hi Mike,
I have a starter for the GSX400E (twin cylinder) but dont think I have one for the GSX400F (four cylinder). You can email me direct at goodpartsnz@gmail.com and I can send a photo. Cheers Simon
January 28th, 2015 at 10:42 pm
Hi I’m after the Lh and Rh side fairings and nose cone. top radiator with fan radiator overflow bottle and clutch lever for my 98 TL 1000R
January 29th, 2015 at 8:57 pm
Hi Karl,
sorry but most of those parts were either damaged or have sold. I have a radiator fan assembly (no radiator) available at $50 and a complete clutch lever/clutch perch assembly at $40. You can email me directly at goodpartsnz@gmail.com Cheers Simon
February 2nd, 2015 at 9:12 pm
Hi
would you have the plastic air vent pipe (runs from front left of fairing to a rubber pipe under fuel tank) for a 1998 GSXR1100?
cheers
February 2nd, 2015 at 10:41 pm
Hi martin,
yes I think I can help with that one. Please email me directly at goodpartsnz@gmail.com and I will send photos to confirm I have the correct part. Cheers Simon
February 4th, 2015 at 4:29 pm
Hi,
I am looking for rear shocks or rear springs for a 1988 or similar Suzuki Savage LS650.
Would you happen to have a pair? Thanks, Jake.
February 4th, 2015 at 9:50 pm
Sorry cant help with those.
February 6th, 2015 at 2:46 pm
Looking for rear shocks for a 1992 Suzuki Katana 250. Would you have any please? thanks Liz
February 7th, 2015 at 9:15 pm
Sorry Liz cant help with those currently. Cheers Simon
February 10th, 2015 at 10:52 pm
Hi, would you have a good stator for a GSX400 E or EX?) thanks Tim.
February 11th, 2015 at 1:08 pm
Sorry Tim, cant help with a stator currently.
February 12th, 2015 at 6:57 pm
Hi, Would you have a complete working engine for a Suzuki TS250? if not, a TS185? Thanks 🙂
February 12th, 2015 at 9:29 pm
Hi Scott,
sorry cant help with a complete TS250 engine or 185. Not easy to come by those old motors these days.
Cheers Simon
February 13th, 2015 at 8:19 pm
hi there,
Im after a front wheel part for a 96 rf 900r, its the peice the brake disc connects to, sorry not sure what its called.(left side)
thanks
February 14th, 2015 at 12:53 pm
Hi James.
not quite sure what part you are referring to. The brake disc bolts directly to the front wheel . Do you mean the brake caliper? I do have a LH brake caliper available at $80. You can email me directly at goodpartsnz@gmail.com Cheers
February 13th, 2015 at 8:43 pm
After price and availablity on a 97 suzuki rf900rv front brake rotor thanks
February 14th, 2015 at 12:57 pm
Hi Duke,
Only have one RH front rotor in stock. Approx 4.25mm thick $120. You can email me directly at goodpartsnz@gmail.com Cheers Simon
February 18th, 2015 at 11:56 am
Looking for original suzuki rg500 fairing parts speedo oil tank an pump…. and Suzuki rgv pepsi original fairing and black pipe ends
February 18th, 2015 at 9:06 pm
Sorry nothing for the RG500 in stock. Cheers
February 26th, 2015 at 8:30 pm
hello I was wondering if you know what startermotors are compatible with a gsxr 250 1988 model?
February 26th, 2015 at 9:13 pm
Hi Izaak,
I have starter motors for the GSXR250 in stock. If you email me directly at goodpartsnz@gmail.com I can provide more details. Cheers Simon
March 16th, 2015 at 3:32 pm
Could you tell me if you would have a good condition master cylinder for DRZ400SM 2009? My one only has paint damage for your information. Thanks
Keith
March 27th, 2015 at 10:52 pm
Sorry cant help with that one Keith. I would suggest you have yours repainted. Cheers
March 26th, 2015 at 12:22 pm
Hi,
I am currently looking for a rear brake cylinder and 2 mirrors for 89 gsxr250 also I am looking for replacing the fairings if I can find a good price
March 27th, 2015 at 10:51 pm
Hi Vinnie,
sorry for the late reply as I am currently overseas on holiday, returning on April 1st. I cant help with mirrors, but can supply a rear brake master cylinder with reservoir at $80. I don’t have a good upper front fairing but do have some good fairing side panels. If you would like more details please email me directly at goodpartsnz@gmail.com Cheers Simon
April 23rd, 2015 at 1:03 am
Hey mate was wondering if you have the lh cover off a gsx 400e the small cover that hides the wires and relays please and how much
April 23rd, 2015 at 10:02 pm
Hi Kane,
I have just got some GSX400E engine parts in, but wont have a chance to check these out until after ANZAC weekend. email directly at goodpartsnz@gmail.com and I will reply after the weekend. Cheers Simon
April 29th, 2015 at 12:32 am
Hello,
I’d like to know if you have a complete gt550 engine for sale, and if so how much.
Thanks for your help.
Regards, Ian Jackson.
April 29th, 2015 at 9:48 pm
Hi Ian,
I have a GT550 engine that is almost complete, but would have to be treated as parts rather than a complete running engine. You can email me directly at goodpartsnz@gmail.com if you would like further details. Cheers Simon
April 29th, 2015 at 10:15 pm
Hi have Suzuki across forks and how much? Thanks
April 29th, 2015 at 11:02 pm
Hi Jacques. I have a pair of forks from the Suzuki Across, at 4180/pair. You can email me directly at goodpartsnz@gmail.com if you would like further details. Cheers Simon
May 25th, 2015 at 1:53 pm
Hi I’m looking for both side covers for my 1980 gsx 250 can u help ? Doesn’t matter wat colour, and hw much to deliver to Hamilton ?
May 25th, 2015 at 2:03 pm
And both rear indicators if possible? thanks
May 25th, 2015 at 2:20 pm
Hi Adam, I think I have sidecovers for that model in stock. Can you email me a photo of your bike to goodpartsnz@gmail.com and will see if I can help. Cheers Simon
May 31st, 2015 at 11:15 pm
Hi any suzuki. Gn 250 muffler in stock? Thanks
June 1st, 2015 at 6:11 pm
Hi.
I am currently dismantling a 2007 GN250 and the muffler is available. The muffler and header pipe are a single piece. The muffler has some light scratching towards the rear but its nothing major. $100. If you’re interested, please email me at goodpartsnz@gmail.com and I can provide photos and further details. Cheers Simon
June 3rd, 2015 at 6:41 am
Hi.
I’ve seen a dismantle auction in Trademe for a GS1200SS, I’m interested in the speedo and the main wire harness, dependin on the condition, do you have any of this? Thanks!
June 3rd, 2015 at 11:56 am
Hi Oscar,
Sorry no speedo in stock but I do have a main loom. It looks to be in good tidy order with all plugs in tact. There is the odd bit of extra wiring where the previous owner must have had heated drips etc wired in, but overall looks tidy. The loom is available at $100. You can email me at goodpartsnz@gmail.com if you would like further details including a photo. Cheers Simon
June 18th, 2015 at 1:53 pm
Hi Simon hoping u might hav twin exhaust set up for ma 1980 suzuki gsx 250 if im lucky how much including postage? Plz and thank u
June 18th, 2015 at 5:50 pm
Hi Adam,
sorry I cant help with that one. Might be hard to come by these days. Cheers
June 25th, 2015 at 1:28 pm
kia ora daniel hear im looking for a suzuki gsx 400f tank.pleas email or text me with a quote pleas..0221663005
June 25th, 2015 at 6:33 pm
Hi Daniel. I should be able to help with that, so will email you directly. Cheers Simon
June 25th, 2015 at 6:50 pm
Hi again Daniel. Having trouble emailing you for some reason. Please email me directly, at goodpartsnz@gmail.com
Cheers
Simon
July 1st, 2015 at 8:11 pm
I i am looking for a exaust for a suzuki gn 250 year 2004. Thanks
July 5th, 2015 at 5:58 pm
Sorry cant help with that one. Cheers
July 4th, 2015 at 1:41 pm
Hi there,
I am after a few parts for my Suzuki GSX400e. Both side covers, an exhaust and a set of carbs.
If you could email me that would be great. Cheers John
July 5th, 2015 at 5:58 pm
Hi John. I cant help with sidecovers or an exhaust, but I may be able to help with a set of carbs. I will check early this week and get back to you ASAP. Cheers Simon
July 14th, 2015 at 1:30 pm
Hi do you have a front brake caliper and master cylinder for my 1980 suzuki gsx 250 and hw much thanx
July 14th, 2015 at 8:20 pm
Hi Adam,
I have a caliper from the GSX400E which will be the same as the 250 and may also have a front master cylinder. If you can email me directly at goodpartsnz@gmail.com I will see what I can do. Cheers Simon
July 27th, 2015 at 10:32 pm
seat bolts gn250
July 28th, 2015 at 9:41 am
Should have those. Will email you directly.
September 7th, 2015 at 12:24 pm
Hi do u have a air filter and ignition barrel and gear shift rod and a seat for 1987 gsxr 250 im stuck for parts
September 8th, 2015 at 6:05 pm
Hi. I can help with an ignition switch and the gear linkage rod, but not sure on an airfilter. If you email me directly at goodpartsnz@gmail.com I can supply more details including photos. Cheers
October 8th, 2015 at 6:47 pm
hi im looking for front fairings for a gsx250 invader?
October 8th, 2015 at 8:03 pm
Hi Daniel,
I have some fairing panels although all will require some plastic welding repairs. I may also have an upper front fairing which requires quite a lot of repairs. These fairings are hard to come by now as Suzuki hasn’t made parts for this model for some years. If you email me directly at goodpartsnz@gmail.com I will email photos of the panels I have in stock. Cheers Simon
October 24th, 2015 at 10:59 pm
Hi, I emailed a few days ago but thought id cover my bases in case it didn’t go through. I’m after a gsx400e twin complete bare engine, anything available?
Cheers
Aarin
October 25th, 2015 at 8:56 am
Hi Aarin, sorry for the delay. I will reply to your email after the long weekend. I dont have a complete engine but do have a bottom end etc. Cheers Simon
October 30th, 2015 at 4:38 am
Do u have the pick up coils for a 2004 GSX250, if you do how much do you want for them? My numbers 02040690872, or email scotthcowan@gmail.com
October 30th, 2015 at 8:52 am
Sorry Scott, all sold currently. Cheers Simon
November 11th, 2015 at 12:25 am
Hey, any RH fairing and front windshield with rear-view mirrors for a grey ’03 Suzuki GSX 250 Invader?
November 11th, 2015 at 8:18 am
Hi Dan, cant help with a screen or main upper front fairing. I do have a couple of RH fairings panels in stock. They will need some plastic welding but are easily repaired. If you email me directly at goodpartsnz@gmail.comk I can supply more details including photos. Cheers Simon
November 26th, 2015 at 12:59 pm
Hi please price and avilability for a pIr of forks for a 1998 rf 900 suzuki. postage to Matamata thanks
November 26th, 2015 at 5:55 pm
Sorry no forks in stock currently. Cheers Simon
November 26th, 2015 at 5:33 pm
Hi do you have a ls650 starter please?
Thanks
November 26th, 2015 at 5:54 pm
Sorry no
November 29th, 2015 at 2:20 am
yes hi i am after a gsx invader ignition switch and keys if possible.
November 29th, 2015 at 9:58 am
Sorry all sold currently.
January 1st, 2016 at 8:38 pm
Howdy was wondering if I could get a price for a starter motor for a 88 Suzuki savage and a battery/battery box cheers!
January 2nd, 2016 at 5:10 pm
Sorry cant help with a starter motor for that model currently. Cheers
January 7th, 2016 at 8:35 pm
Got a triple tree for a 1980 GS550?
January 7th, 2016 at 8:49 pm
Hi Ray. I have a triple tree from a 1978 GS550. Think they will be the same but not 100% sure. If you email me at goodpartsnz@gmail.com I can send photos. Cheers Simon
January 15th, 2016 at 11:17 pm
Hi
I’m after clip-ons (L and R) for a GSXR1100W (50mm).
Regards
Marty
January 16th, 2016 at 9:57 am
Sorry nothing suitable in stock currently. Cheers
January 23rd, 2016 at 11:22 pm
Hi
You wanted me to contact you here ‘re my enquiry on trade me for the GSX14 engine.
January 24th, 2016 at 10:16 am
Thanks Matt. I will email you directly. Cheers Simon
January 24th, 2016 at 5:36 am
I’m looking for pick up coils for 04 gsx250 do u have any by chance
January 24th, 2016 at 10:15 am
Sorry all sold.
January 25th, 2016 at 8:49 am
Hey, I’m looking for a shift shaft with the same actuator spline as a Hayabusa – could be quite a few Suzuki’s…not sure – I need to make a female copy for a custom lever. Can you help? Cheers
January 25th, 2016 at 7:58 pm
I may be able to help. Email me directly at goodpartsnz@gmail.com
February 13th, 2016 at 9:05 pm
Hi there im wondering if u guys could help me out ???? Im after a cylinder for a 1980 suzuki ts250 …. If you guys hav 1 how much for the part including shipping …thank you regards poppy tuhi….
February 14th, 2016 at 8:51 pm
Hi Poppy. I have several barrels that are marked as being from the TS250 but I don’t know what year. If you are able to email some photos of your barrel to me at goodpartsnz@gmail.com I can compare with those I have in stock. Cheers Simon
February 14th, 2016 at 10:37 pm
Hey after fork legs for 1995 triumph speed triple..told sukuzi bandit the same and zxr front wheel.legs capalirs.guard wheel please.price just something that will work.02040281894.thank you
February 15th, 2016 at 8:00 am
Hi Harry,
if you can email me directly at goodpartsnz@gmail.com with the diameter of the fork legs where they sit in the triple clamps, I will see if I have anything suitable in stock. Cheers Simon
February 16th, 2016 at 10:50 pm
You havent by chance got a exhaust system that would fit my katana 600. 1991
February 17th, 2016 at 11:33 am
Sorry no
February 26th, 2016 at 5:14 am
Hello, Do you have the original mirrors for a 1988 GSXR 400? Thank you!
February 26th, 2016 at 8:06 am
Sorry cant help with those.
March 20th, 2016 at 12:20 am
Hi am after a gear leaver bracket off a 97 98 tl1000s I’m in Auckland
March 20th, 2016 at 8:52 am
Sorry all sold currently.
March 20th, 2016 at 1:47 am
Hello I’m looking for a battery for my 1999 Suzuki FXR 150 as the one it has won’t charge at all an I can only start it with a car battery jump allso looking for the right foot peg an brake braket with peg and brake assembly cheers
March 20th, 2016 at 8:51 am
Sorry cant help with either of those currently.
March 22nd, 2016 at 8:03 am
hello im after a red right hand side cover for 2005 gn250 cheers
March 22nd, 2016 at 12:39 pm
Sorry cant help with that one.
March 27th, 2016 at 2:56 am
Hay there just wondering if you had any gxr 750 motors there for a I think off hand late 70s to mid 80s about and how much please and thank you
March 27th, 2016 at 7:47 pm
Hi Glenn. late 70 to early 80’s would be GSX, rather than GSXR. There are a couple of different GSX750 engine types during that period too. If you can email me directly at goodpartsnz@gmail.com I will see if I can help. Cheers Simon
April 4th, 2016 at 6:11 pm
Looking for a kickstarter and drive gear for an FXR150. Cheers
April 4th, 2016 at 7:13 pm
Sorry Scott, cant help with those. Cheers Simon
April 16th, 2016 at 1:37 pm
Recently put my 1987 gsxr into a barrier and ruined the forks and probably a bunch of other parts. Just wondering if you have any forks and possibly plastics?
April 16th, 2016 at 1:39 pm
Hi Aidan. What model GSXR?
April 18th, 2016 at 9:57 pm
Hey mate, I am after an ignition switch assembly, with keys, and a fuel cap, again with a key. My bike is a 1987 GSX400e but I know that some of the GS and GSF models are very similar so may be compatible?
Cheers, Jonas.
April 19th, 2016 at 9:14 am
Hi Jonas. I should have an ignition switch and key from a GS450 which will be the same as the GSX400E. If you email me directly at goodpartsnz@gmail.com I can provide a photo for you to compare. Cheers Simon
May 27th, 2016 at 9:53 pm
hi, do you have a complete exhaust for a Suzuki FXR 150? cheers
May 27th, 2016 at 11:38 pm
Sorry no.
June 7th, 2016 at 1:19 pm
Just needing 2 know the price of a carburettor for a Suzuki GSX 250 F 1990
June 7th, 2016 at 7:41 pm
Hi Mason. Is this the 250 Across model. If so, this model uses the same engine and carbs as the GSXR250 and I think I have a set in stock but need to double check. A set of carbs would be $100 plus postage. If you email me directly at goodpartsnz@gmail.com I will be able to provide further details. Cheers Simon
June 7th, 2016 at 5:24 pm
Hi, I need a Gsf/gsxf/gsxr 400 carb or Parts, I need other part too But the carb its prior
Best regards
June 7th, 2016 at 7:38 pm
Hi. If you email me directly at goodpartsnz@gmail.com and let me know what model you are wanting the carbs for, I will see if I can help. These will be the twin barrel carbs and I should have some in stock. Cheers Simon
June 16th, 2016 at 1:37 pm
Hi do you have an airbox and trunking for a 85 gsxr400. Cheers
June 16th, 2016 at 1:41 pm
Hi Ryan. Yes I have one in stock and will email you directly. Cheers Simon
August 10th, 2016 at 10:34 am
Hi after exhaust pipes/headers for 1979 GS550….help!
August 10th, 2016 at 11:02 am
Sorry cant help with those. Cheers
August 29th, 2016 at 7:31 pm
Hi just enquiring if you have twin carbs off a Suzuki vl1500? If so how much are you asking for them?
August 29th, 2016 at 8:11 pm
Hi Jamie.
Yes I will have a pair available at $150 and have emailed you directly. Cheers Simon
September 2nd, 2016 at 7:05 pm
Hey mate I’m in need of a stator for a gsx400e 1985 do you have one?
September 2nd, 2016 at 7:23 pm
Hi Stefan. Yes I can supply a GSX400E stator at $100 plus postage. If you email me directly, at goodpartsnz@gmail.com I can provide further details. Cheers Simon.
September 23rd, 2016 at 8:45 pm
Have you got any indicators for a 1980 gsx 1100
October 25th, 2016 at 9:41 am
Hello I am trying to find a pickup coil for my 2004 gsx 250 invader.
Cheers
October 26th, 2016 at 8:44 pm
Hi Ryan,
the CDI pick up coils are linked to the stator on this model so it comes as a single assembly. I can supply a stator/CDI pickup coil assembly at $180 plus postage and have one left in stock. These appear to be a common problem on the Invader as these parts tend to sell quickly.
If you are interested, please email me directly at goodpartsnz@gmail.com and I will then supply my bank account details for payment. Cheers Simon
November 6th, 2016 at 6:22 pm
Hey do yous have a carby for a 1980 gsx 750 its a r carby motor of so how much plus freight to gore southland thanks
November 6th, 2016 at 7:20 pm
Hi Blair. I have a set of carbs labelled as being from an 81-82 GSX750 and these should be the same type used on your 1980 model. I will need to check them out as they have been in storage for some years but as long as they look to be in good tidy order, you are looking at $140/set plus $8.50 postage. If you would like further details, please email me directly at goodpartsnz@gmail.com
Cheers Simon
November 14th, 2016 at 9:16 am
Do u have clutch cable for ls650 1988
November 14th, 2016 at 5:49 pm
Sorry all sold Ryan. Cheers Simon
November 29th, 2016 at 8:53 am
Hey bro just wondering if you have any parts for a 1994 suzuki bandit 250
November 29th, 2016 at 8:23 pm
Hi Owen. Yes I have dismantled several bandit 250’s. Yours should be a GJ74A model but would be best if you can confirm that. You can email me directly at goodpartsnz@gmail.com and let me know what parts you’re looking for. Cheers Simon
December 1st, 2016 at 2:40 pm
Hey guys I’m after vs700 coils
December 1st, 2016 at 6:33 pm
Hi. Yes I can supply a pair of coils from the VS700/750 in good working order, complete with leads and plug caps, at $100/pair. If you would like more details, please email me at goodpartsnz@gmail.com Cheers Simon
December 16th, 2016 at 10:58 am
Hey guys hoping there is a left side foot peg assembly for a ’94 gsx250 across?
Cheers
December 16th, 2016 at 11:21 am
Hi Billy. Thanks for your enquiry. I have the alloy LH footpeg hanger (bracket) in stock as well as a LH footpeg and also the gear lever and gear linkage assembly. If you email me directly, at goodpartsnz@gmail.com and let me know which of the parts you require, I will reply with further details including photos. Cheers Simon
December 31st, 2016 at 1:25 pm
Carburettors gsxr250 1990
December 31st, 2016 at 5:05 pm
Sorry none in stock currently. Cheers Simon
January 6th, 2017 at 2:33 am
Hi. would you by chance have left and right lower fairing for a gsf1250 or similar?
January 6th, 2017 at 8:07 am
Sorry cant help with those Andrew. Cheers Simon
January 27th, 2017 at 7:11 pm
Hey after a left hand switch black to suit a 1990 gsxr1100. Cheers
January 27th, 2017 at 8:55 pm
Hi Sam.
I have a LH switch block from a GSXR1100L in stock. If you email me at goodpartsnz@gmail.com I will send a photo for you to compare. Cheers Simon
February 5th, 2017 at 2:12 pm
The GSX 1984 Katana you are wreaking do you have the gauge cluster casing.and if so does it fit my 1984 with the gold frame and pop-up headlight model.looking forward to your reply….Ron
February 5th, 2017 at 5:47 pm
Hi Ron. Sorry the dash has been sold. Cheers Simon
March 28th, 2017 at 10:04 am
Hello,
I’m looking for a cowling aisy for a gsx400 1981.
Thanks
Cheers
Philippe
March 28th, 2017 at 6:09 pm
Sorry cant help with that one. Cheers
April 5th, 2017 at 6:43 pm
Hi, Looking for parts of RF900 1997,the 4 sets of rubber mounts of the handle bar plate.
April 6th, 2017 at 10:02 am
Hi Wayne. I have the complete set of rubber mounts with the bolts etc at $30. If you are interested, please email me at goodpartsnz@gmail.com Cheers Simon
April 6th, 2017 at 10:14 pm
Hi Simon….yes I would like them please. Can’t seem to send you an email to that address?will keep trying, cheers
April 18th, 2017 at 10:05 pm
I am after a running 650 savage engine . mine is an 1988 . not sure if newer models will fit and bolt straight up . if you have 1 how much
April 19th, 2017 at 8:46 am
Sorry cant help with that one Warren. Cheers
April 23rd, 2017 at 10:22 am
Hi
I’m looking for an engine rebuild kit for a 1987 GSXR 250. Is this something that you could help me with?
Thank you
Jeff
April 23rd, 2017 at 9:16 pm
Sorry cant help with that one Jeff. Cheers Simon
April 24th, 2017 at 12:05 am
No worries. Any idea where I could find one? Or, possibly a shop manual for my bike? Maybe a website for these old bikes, I haven’t had much luck.
April 26th, 2017 at 11:30 am
Hi David A. Hea wondering if you would have a set of 79 gsx750 FRONT FORKS an rotors pair for a katana.
April 26th, 2017 at 6:46 pm
Hi David. Sorry I cant help with forks but I may have a pair of front brake rotors that will suit. If you email me at goodpartsnz@gmail.com I will get back to you with further details. Cheers Simon
April 26th, 2017 at 6:51 pm
1990 gsxr leftjand switch block
April 26th, 2017 at 7:35 pm
Hi Sam. What model GSXR?
May 17th, 2017 at 6:27 am
I’m looking for 2 side mirrors and the nuts and bolts for a 1989 Suzuki gsxr 250cc
May 17th, 2017 at 9:12 am
Hi Thomas. Sorry I cant help with those currently as all my GSXR250 mirrors have sold. Cheers Simon
June 5th, 2017 at 9:25 pm
Hi, looking for a starter motor for 2009 Suzuki Intruder VL250.
June 6th, 2017 at 9:28 am
Sorry all sold currently. Cheers
July 3rd, 2017 at 4:39 pm
hi, I am looking for a VL250 starter motor. thanks
July 3rd, 2017 at 6:39 pm
Sorry David, all starters have sold. Cheers Simon
July 8th, 2017 at 1:03 am
Hey after parts for a a1987 gsx 400e..what would have in stock?.. cheers
July 9th, 2017 at 10:03 pm
Hi Eammon. Thanks for your enquiry, but it would be easier if you can email me at goodpartsnz@gmail.com with a list of parts you are looking for. I can then respond with details if I have anything suitable in stock. Cheers Simon
July 13th, 2017 at 10:12 am
I’m after a clutch slave cylinder for a 1999 VL1500 intruder. Can you help?
July 13th, 2017 at 6:22 pm
Hi Kelly. I can supply a clutch slave cylinder from a 2004 VL1500 at $50 plus postage. If you are interested, please email me at goodpartsnz@gmail.com Cheers Simon
August 7th, 2017 at 12:30 am
Hi there do you have a carby for a 1987 gsx400x impulse?
August 7th, 2017 at 8:58 am
Hi Chris. yes I have a set of carbs available from the GSX400X Impulse at $100. You can email me at goodpartsnz@gmail.com if you would like further details. Cheers Simon
August 9th, 2017 at 8:25 pm
Hi do you have the tail fairing off a bandit 250v? Also might you have the gauge cluster and a front caliper and reservoir?
Cheers
Matt
August 9th, 2017 at 8:30 pm
Hi Matt. What year is the Bandit or do you know if its a GJ74A or GJ77A model. Thanks simon
August 15th, 2017 at 5:57 pm
Hi, I’m after a pair of coils for my 89 250 GSXR… do you have and if so price and shipping to Northland please. Please reply to email
Cheers
Jae
August 15th, 2017 at 9:31 pm
Hi Jae.
I have a pair of coils in stock for the GSXR250 (GJ72A) and these would be $120/pair including leads and plug caps. Postage would be $5.50 standard post or $7 tracked ($10.70 tracked to an RD address).
If you are interested, please email me at goodpartsnz@gmail.com Cheers Simon
September 2nd, 2017 at 3:46 pm
Hey do you have a starter motor for a vl250 intruder and if so how much please
September 2nd, 2017 at 6:13 pm
Sorry Hayden, all sold. Cheers Simon
September 6th, 2017 at 7:34 pm
Rear wheel for VL1500LC 98-04?
September 6th, 2017 at 8:35 pm
Hi Ric. I have a rear wheel from a 2003 VL1500 available at $250 including the brake hub assembly etc. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
September 23rd, 2017 at 8:27 am
Hey guys. Just wondering if you have a Suzuki rf400 stator coil available. Much thanks.
September 23rd, 2017 at 9:38 am
Sorry cant help with that one Ryhan. Cheers Simon
November 24th, 2017 at 3:11 am
Hi im looking for a strator and pick up coils for a 2004 GSX250, I think there also the same as RGV250, but im not sure.
November 24th, 2017 at 7:55 am
Hi Scott. Sorry I cant help with those . This is a very common problem with this model (along with the CDI pickups and CDI), and I have several bikes here that have had those parts removed before anything else. I doubt very much if the RGV parts would fit, and you may need to get the stator rewound if its the stator coils that are the problem. Suzuki havent made parts for the GSX250 Invader for many years as I think it was a Japanese home market model originally. Cheers.
December 21st, 2017 at 12:39 pm
Hi I’m looking for parts for a Suzuki gs1200ss
December 21st, 2017 at 12:53 pm
Hi. Not many parts in stock I’m afraid, but if you email me at goodpartsnz@gmail.com with a list of what parts you require, I will reply with details if I have anything suitable in stock. Cheers Simon
December 26th, 2017 at 11:32 am
Would you have a seat for a DL 1000 in stock please? Cheers Tim
December 26th, 2017 at 3:08 pm
Hi Tim.
I have a seat in stock from a 2007 DL1000. It will require recovering as the vinyl has split in a couple of places, but is otherwise in good order. If you email me at goodpartsnz@gmail.com I will get back to you with details including photos, although photos wont be available until after January 3rd. Cheers Simon
January 6th, 2018 at 3:17 pm
Hi there do you have a left side stator cover for a 1998 suxuki gsx750f available. Thanks
January 6th, 2018 at 6:18 pm
Sorry cant help with that one. Cheers Simon
January 31st, 2018 at 8:02 pm
Hi Simon any chance you have full set of carbs for 1990 gsx600fzf thats the red fairing beauty, repairer broke one of the internal sliders and have stuck something in from another clise model, but this seems to cause fuel flow issues and it is running on 3 cylinders until it loosens up also a red seat and left side fairing where suzuki is written… also damaged during repair
February 1st, 2018 at 8:25 am
Hi Mark. Sounds to me like you need to change your repairer! Unfortunately I cant help with the carbs or the other parts you require. Cheers Simon
February 13th, 2018 at 4:49 pm
Hi there Simon, I’m looking for a tidy front brake master cylinder off a gsx650f or gsf1250, can you help? (I’m fairly sure they are the same) Cheers, Dan
February 14th, 2018 at 6:18 pm
Hi Dan.
I have both a 2008 GSX650F and a 2008 bandit 1250 in stock, both with good undamaged front brake master cylinders. The complete assembly including brake lever and brake switch etc in good order, would be $140 plus shipping. If you are interested, please email me at goodpartsnz@gmail.com and I can provide further details. Cheers Simon.
March 6th, 2018 at 9:08 am
Hi donyou have the complete engine for the gsf400 bandit?
March 6th, 2018 at 8:55 pm
Sorry Jack, my only complete bandit 400 engine has sold. Cheers
May 17th, 2018 at 3:02 pm
hi mate would you have the license plate light for 1984 katana pop up headlight model cheers
May 17th, 2018 at 10:32 pm
Hi Ewen. Sorry I cant help with that one. Cheers Simon
July 14th, 2018 at 12:11 pm
Just enquiring if you have the instrument cluster for a 1984 Suzuki katana pop up
July 14th, 2018 at 1:54 pm
Sorry cant help with that one. Cheers
July 23rd, 2018 at 11:44 am
Looking for Handlebars for Suzuki VL250. Mine is from year 2000.
July 23rd, 2018 at 5:56 pm
Sorry cant help with those. Cheers
July 29th, 2018 at 8:28 pm
I’m after a gas tank for a 91 gsxr 750, will any other model tank fit?
July 29th, 2018 at 9:56 pm
Sorry cant help with that one. I think you will find the 1100 model tank will also fit. The tanks look much the same from 1998 through to the water cooled models in 93, so the tanks from models in those years may also fit.
August 11th, 2018 at 12:13 am
hi
I’m after a front disc for a 99 vl1500.
would you have one please?
thanks
peter
August 11th, 2018 at 11:24 am
Sorry cant help with that one. Cheers Simon
August 14th, 2018 at 9:57 pm
Hi James poulter just wondering what you have available for 1986 GS1100G . Looking for engine crash bars , pack rack frame to bolt to bike accessories mainly . Cheers
August 15th, 2018 at 8:59 am
Hi James. Sorry I cant help with those. Cheers Simon
August 22nd, 2018 at 9:05 pm
David hea, Hi I got a 97 gsx Suzuki katana. I’m looking for front forks-second hand only, plus L/H morrier, as well as L/H Intercator. you can contact me on 0211824641.
August 23rd, 2018 at 6:29 pm
Hi David,
I have a GSX750F in stock that’s a similar year. I had a look at the forks today, and while they will need new oil seals, the chrome on the lower part of the stanchions looks good and has no pitting. The bike will need to be dismantled before the forks are available, but they will be $250/pair plus shipping. I may have an indicator, but need to know if its LH front or rear and I have one mirror but cant recall what side. If you are interested in these parts, please email me at goodpartsnz@gmail.com and I can then supply further details. Cheers Simon
September 12th, 2018 at 10:05 am
Hello, I’m after the air filter housing for a 1984 GSX 750cc Katana, can you help me there?
Bye – Terry.
September 12th, 2018 at 10:16 am
Sorry cant help with that one.
October 8th, 2018 at 6:48 pm
Hi, looking for a starter motor for Suzuki VL250 2008. Thanks.
October 8th, 2018 at 9:34 pm
Sorry cant help with that one (they tend to sell quickly). Cheers
October 29th, 2018 at 10:50 pm
Hey mate do you have the left hand switch gear for the GSXR400 85?
October 30th, 2018 at 6:20 pm
Hi. I have a LH switch block from the 84/85 GSXR400 in tidy order but it is missing the separate choke lever assembly that bolts underneath the actual switch block. If you email me at goodpartsnz@gmail.com I can send you a photo. Cheers Simon.
November 14th, 2018 at 8:41 am
Hi there i was wondering if you have a crank case cover (left side) for a 1997 suzuki gsf 600 Bandit?
November 14th, 2018 at 6:07 pm
Sorry cant help with that one Anthony. Cheers Simon
November 29th, 2018 at 8:48 pm
Hey mate,
Do you have the following items that will fit a 1987 Suzuki GN250?
-Fuel tank/ Chain/ Ignition (complete with wiring)/ Right handle bar switch assembly and throttle handle and a Clutch handle please.
What would be the individual cost for each part shipped to Hastings, as i may not be able to buy all parts in one go.
Look forward to your response,
Erns
December 23rd, 2018 at 10:48 pm
Hi do you have any 21 inch front wheels for a Suzuki intruder?
Or a petrol tank for a 88 750 intruder?
Cheers
Shaye
December 24th, 2018 at 8:00 am
Sorry cant help with either of those. Cheers Simon
December 31st, 2018 at 12:41 am
Fairings for the GSX250 invader?
December 31st, 2018 at 8:08 am
Hi Kyle. I have a few panels in stock for the GSX250 Invader but most will need repairs and I don’t have the main upper front fairing. You can email me at goodpartsnz@gmail.com if you’d like more details. Cheers Simon
February 10th, 2019 at 5:31 pm
Hi do you have and gn250 fuel tanks for sale. Could you let me know how much these are.
Thank yoy
February 11th, 2019 at 7:51 am
Hi. I have a couple of GN250 fuel tanks in stock, so if you email me at goodpartsnz@gmail.com I can then send you details including photos. Cheers Simon
February 18th, 2019 at 10:44 pm
Hi do you have front foot pegs, and indicators front and back the front vs700cc
February 19th, 2019 at 8:08 am
Sorry all sold.
February 24th, 2019 at 1:21 am
Hi, I’m looking for the ‘glove box’ fairing inserts, both sides for a Suzuki Katana GSX750 pop-up Part numbers: 9442408A00 & 9442308A00. Fingers crossed…
February 24th, 2019 at 8:12 am
Sorry cant help with those. Cheers
April 22nd, 2019 at 12:30 pm
Hi, I’m looking for a RH mirror for a 1989 Suzuki GSXR 250R GJ73A. Black would be ideal but happy for any colour
thanks
April 22nd, 2019 at 1:30 pm
Sorry no mirrors in stock. Cheers Simon
May 7th, 2019 at 2:56 pm
Hi was wondering how much for the front end for a Suzuki sv650?
May 7th, 2019 at 6:35 pm
Sorry all forks have sold currently.
May 29th, 2019 at 12:47 am
Hi how much for a gt550 frame
May 29th, 2019 at 8:35 am
Sorry cant help with a GT550 frame. only a very small number of parts remaining for this model. Cheers.
June 15th, 2019 at 8:26 am
Hi just wondering how much for an 88 Suzuki savage 650 engine and cdi thanks
June 15th, 2019 at 10:28 am
Hi Cale,
I have recently dismantled an 88 LS650 with approx 47000km on the clock. Engine started and ran well before the bike was dismantled. The bare engine (without starter and carb) would be $700. bare engine with CDI would be $900 plus shipping. The starter motor and carb are also available if required. If you’d like further details, please email me at goodpartsnz@gmail.com Cheers Simon
July 7th, 2019 at 11:23 am
Hi…do you have eny suzuki uz50 parts?
July 7th, 2019 at 10:28 pm
Sorry no.
July 9th, 2019 at 8:27 pm
Hi – Do you still have the 1989 gsxr 1100 89 engine?
July 10th, 2019 at 8:33 am
Hi Troy, sorry no complete oil cooled GSXR1100 engines in stock. I do have some engine parts from the GSXR1100L engine if that’s of any help. You can email me directly, at goodpartsnz@gmail.com Cheers Simon
July 25th, 2019 at 8:39 pm
Hey there, I am looking for a swingarm for a 1992 GSXR 1100 can you please help.
July 26th, 2019 at 12:05 pm
Hi John,
I should have a swingarm in stock from a GSXR1100L (1990) which may be the same as your 92 model. If you email me at goodpartsnz@gmail.com I can send you a photo. Cheers Simon
August 2nd, 2019 at 1:45 am
Hi would you have a running 81\82 Suzuki gs650 engine or know of someone in chch. if so what would it cost me. Thanks for your time.
Regards
Bevan
August 2nd, 2019 at 8:43 am
Sorry cant help with that one Bevan. There was a GS650 on Facebook Market place recently but it doesn’t appear to be there now. Cheers Simon
August 25th, 2019 at 1:01 pm
Hi any chance you have a good running Suzuki GS650G engine 1981\83 or am I dreaming to find one these days
August 25th, 2019 at 8:46 pm
Sorry cant help with that one. I have a GS650 Katana in stock, but it sat in a shed that wasn’t overly weather tight for over 20 years, so the engine doesn’t look to be in very good shape.
August 27th, 2019 at 2:15 pm
Hi
i am looking for GSX750es 89 front forks and rear taillight lens
can you help
regards brendon
August 27th, 2019 at 5:50 pm
Sorry cant help with either of those currently. Cheers Simon
August 28th, 2019 at 10:56 pm
Do you have engine crash bars for a gs550?
August 29th, 2019 at 8:54 am
Sorry cant help with those.
September 23rd, 2019 at 4:14 pm
Hay i and after a fuel tank for a Suzuki vs1400, do you have anything
September 23rd, 2019 at 8:47 pm
Sorry cant help with that one. Cheers
October 8th, 2019 at 2:07 am
Hi I need the switch gear for a gsxf750 or something comparable
October 8th, 2019 at 8:26 am
Hi Andrew. thanks for your enquiry. Please email me at goodpartsnz@gmail.com and let me know what year your GSX750F is, and if possible a photo of your current switch blocks. Cheers Simon
October 8th, 2019 at 7:35 pm
Hi I’m looking for a set of crash bars for a Suzuki katana 650 1981
October 9th, 2019 at 7:31 am
Sorry cant help with those.
October 10th, 2019 at 4:22 pm
Hey, I’m looking for a exhaust for a 2003 Vl1500. Aftermarket or a good condition standard.
Cheers
October 11th, 2019 at 8:11 am
Hi Ben,
I have a factory exhaust system from a 2007 VL1500 which I think will fit your earlier model. I have both mufflers and the rear cylinder header pipe, but not the front cylinder header pipe. If you’d like further details including photos, please email me at goodpartsnz@gmail.com Cheers Simon
October 17th, 2019 at 4:59 am
Hi i was wondering ic you have a cdi fo 84 gs650gz katana? If so how much including freight to tauranga 3171
October 17th, 2019 at 8:06 am
Hi Ken. I’m just in the process of dismantling a 1982 650 Katana, and will have the CDI available at $130 including tracked postage. If you are interested, please email me at goodpartsnz@gmail.com and I will reply with a photo, so you can compare with your current CDI. Cheers Simon
October 28th, 2019 at 8:45 pm
Hi just after a front fairing for 89 gsxr 250 thanks
October 29th, 2019 at 12:39 pm
Sorry cant help with an upper front fairing for the GSXR250. Cheers Simon
November 4th, 2019 at 10:54 am
Hi there, Do you have front indicators and break lever for GSX650F 2013?
November 4th, 2019 at 12:40 pm
Sorry cant help with those.
November 25th, 2019 at 9:19 pm
I’m in CHCH. Am looking for r/rear indicator for 2004 Suzuki Intruder VS1400. It needs to be bullet style. I think the VL1500 & VS800 have same bullet style. Anything there thanks and if so, how much please.
November 26th, 2019 at 5:33 pm
Hi James.
I have a RH rear indicator from a 2008 VZ800 which should be the same. Wont fit the LH side as the drain hole would be up the top. If you email me at goodpartsnz@gmail.com I can send a photo. Cheers Simon
December 12th, 2019 at 9:36 am
Hi, i am looking for a set of carburetors for a Suzuki gsx1100gm 1991, any help??, please,
December 12th, 2019 at 9:52 am
Sorry cant help with those.
December 13th, 2019 at 11:18 pm
Hi wanting price on 2003 suzuki gz250 starter motor
December 14th, 2019 at 8:39 am
Hi. I can supply a GZ250 starter motor at $80 plus postage. If you would like to purchase, please email me at goodpartsnz@gmail.com with your name and postal address and I can provide bank account details for payment. Cheers Simon
December 30th, 2019 at 9:05 am
Hi, do you have Ignition coil with a lead and Capacitor discharge ignition (CDI) for Suzuki GN 250.
Please write back on bukiclan@yahoo.com
December 30th, 2019 at 9:17 am
Hi Ivan. yes I can supply a GN250 coil with lead and plug cap at $40 and a CDI at $80 plus postage. Cheers Simon
December 30th, 2019 at 9:25 am
Hi Looking for a throttle cable set up for a 1986 Suzuki intruder vs700? Cheers Shaye
Sent from my iPhone
>
December 30th, 2019 at 11:34 am
Sorry cant help with that one currently. Cheers Simon
January 10th, 2020 at 7:55 pm
do you have a left rear indicator flaring/fairing for Hayabusa Gen 2 and a rear seat for Hayabusa gen 2 as well? how much im from Christchurch.
January 10th, 2020 at 9:23 pm
Hi Allen. I can supply a pillion seat from the Gen 2 Hayabusa in very good order at $80. I should have one LH indicator fairing in stock, with a light graze. If you email me at goodpartsnz@gmail.com I will reply with photos . Cheers Simon
January 20th, 2020 at 9:01 pm
Hey guys do you have a wiring harness for at 94 gsxr 750
January 20th, 2020 at 9:42 pm
Hi. Yes I can supply a main wiring loom for the GSXR750W at $80 plus postage. If you email me at goodpartsnz@gmail.com I will supply further details including a photo. Cheers Simon
January 22nd, 2020 at 8:01 pm
Hey, have you got a wiring loom from a ’87 GN250? Cheers
January 22nd, 2020 at 10:57 pm
Hi. The wiring loom from the later model GN250’s should be interchangeable with the early models, and I can supply a wiring loom at $50 plus postage. If you email me at goodpartsnz@gmail.com I will reply with further details including a photo. Cheers Simon
January 24th, 2020 at 10:57 am
Hello do you have fairings for gsx250f 04 invader?
January 24th, 2020 at 11:20 am
Hi. I have very few fairing panels in stock for the GSX250 Invader and most require repairs such as plastic welding. The only undamaged panel I have is a LH mid panel which will require painting, at $50 plus postage.
February 4th, 2020 at 11:08 am
Good morning,
Would you happen to have a secondary throttle motor for a suzuki gsx650f 2011? The part number is 13405-17h20.
Thank you,
Cassandra
February 4th, 2020 at 11:38 am
Sorry cant help with that one.
February 11th, 2020 at 2:57 am
Hey there im after some ignition coils and leads for a 1989 suzuki bandit spitfire 250 (gj74a) and also a carburetor to suit and a ignition if you have any of these parts please cheers
February 11th, 2020 at 7:14 am
Sorry Wiremu, I cant help with any of those parts currently. Cheers Simon
March 7th, 2020 at 4:48 pm
Hi there, I have a 05 gxsf600, do you have a rear shock in good condition, Or is there any other shock that would fit, thanks.
March 9th, 2020 at 9:56 am
Sorry cant help with that one currently.
April 13th, 2020 at 11:50 pm
Hi there, I need a rear shock for a 05 Suzuki gsx600f, but Does the 750f fit as they have better adjustments, thanks.
April 14th, 2020 at 10:35 am
Sorry Paul, cant help with either of those currently. Cheers Simon
April 22nd, 2020 at 8:17 am
Any chance you have an airbox for the GS650?
April 22nd, 2020 at 10:30 am
Hi. I have a complete airbox assembly in stock for the Kat 650 (two sections), but I have another customer also looking at it currently. He has first option, but if you email me at goodparts nz@gmail.com I can send you details including photos, if the other customer doesn’t take it. Cheers
April 22nd, 2020 at 9:59 pm
Hi there wanting a price on the fuel tank, and full wiring harness/loom for 2003 gsx250 invader if you have it cheers
April 23rd, 2020 at 9:43 am
Hi. Thanks for your enquiry. I can supply a wiring loom at $60 and a bare fuel tank (without cap and tap etc) in good order at $120. I have one in blue and another in silver. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
May 3rd, 2020 at 7:37 pm
Hi, I’m looking for a front brake cylinder to fit a Suzuki GS850G as well as left side panel.
May 4th, 2020 at 9:48 am
Sorry cant help with those. Cheers
May 28th, 2020 at 10:14 pm
Looking for Gsx650f 2008 front face fairing
May 29th, 2020 at 10:00 am
Sorry cant help with that one. Cheers
May 31st, 2020 at 2:16 pm
Any chance you have the rear shocks for an ls650?
May 31st, 2020 at 6:52 pm
Sorry all sold.
June 13th, 2020 at 12:17 am
Hi
Do you have a GN250 rear hub Cush drive?
Thanks
June 13th, 2020 at 10:57 am
Hi Rob,
yes I will have the cush drive rubber and the sprocket carrier for the GN250 if you need these. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
June 16th, 2020 at 9:32 pm
Hey mate,
Do you have a cdi and clutch lever for a 1982 Suzuki GSX400E.
Cheers
June 16th, 2020 at 10:55 pm
Sorry cant help with those. The clutch perch and lever are the same as those used on many Suzuki models including the GN250 if that helps, but a CDI will be harder to find.
June 16th, 2020 at 11:17 pm
Do you have any idea where i might find one?
June 17th, 2020 at 9:20 pm
Hey boss how’s it going? I’m looking for a cdi for a 93 rf400 and a rear brake light for a 2005 250ninja, just the red if possible but full brake light is algood, cheers
June 17th, 2020 at 9:34 pm
Sorry I cant help with either of those currently.
June 18th, 2020 at 1:46 pm
Hi Mate
I am looking for a Project. Want to build an old bike. I am looking for Suzuki GSX 550, GS400, and GSX650 Bikes.
I dealy I would like a GS 550 mostly complete bike with potentially a gs450 frame to rebuild the 550 parts on and make it a more compact bike.
I had one on South Africa growing up that was one of the best bikes I ever owned.
Let me know if you can help me with something.
Thanks
Jacques
June 18th, 2020 at 11:39 pm
Sorry I cant help with that one Jacques, as I only sell parts.
June 18th, 2020 at 9:06 pm
Hi im after a front fairing for a 1984 750 katana pop up head light
June 18th, 2020 at 11:42 pm
Sorry cant help with that one.
June 20th, 2020 at 9:02 pm
Hi there, I am after a handlebar and airbox to fit my 1980 GSX1100 (I think gsx750 is the same) If you do have any 1980 parts I’d like to chat on the phone and see what youve got as I may pick up some spears. cheers
June 21st, 2020 at 2:54 pm
Hi Mathew. I may have an airbox (possibly not complete) for the early GSX750/100 but that’s probably about it for that model. If you email me at goodpartsNZ@gmail.com I can send some photos and details. Cheers
June 30th, 2020 at 7:58 pm
Ho there would you havea cdi for 04 gsx250
July 1st, 2020 at 9:46 am
Sorry all sold.
July 6th, 2020 at 11:19 pm
Im after a Suzuki despirado 400 exaust does anyone have 1 or where can u source 1 please?
July 7th, 2020 at 10:04 am
Sorry I cant help with that one.
July 30th, 2020 at 8:05 pm
Hi, after a speedo for a gsxr 1000 k5.
Cheers Tony
July 31st, 2020 at 6:55 pm
Sorry cant help with that one Tony.
August 2nd, 2020 at 1:28 am
Hi do you have a petrol tank for a 1990 RGV250?
August 2nd, 2020 at 10:17 am
Hi Warren,
I have a couple of tanks in stock from the first model RGV250 VJ21. If this is the model you need a fuel tank for, please email me at goodpartsnz@gmail.com and I can provide further details including photos.
August 17th, 2020 at 10:11 pm
Hi there do you have a battery cover for a 2013 intruder 250 in silver?
August 17th, 2020 at 10:12 pm
Sorry no
August 17th, 2020 at 10:26 pm
2004 sv650s
Ignition coils
August 17th, 2020 at 10:29 pm
Hi. Yes I can supply coils with leads and plug caps from a K4 SV650S at $100/pair plus postage. If you email me at goodpartsnz@gmail.com I can provide details including a photo, and also payment details. Cheers
August 23rd, 2020 at 1:39 pm
GN250 Carburetor do you have one
August 23rd, 2020 at 7:55 pm
Sorry all sold.
August 25th, 2020 at 1:12 am
Hi I’m looking for a RHS rear side plastic for 2015-2020 suzuki uz50 in dark blue. Cheers
August 25th, 2020 at 9:33 am
Sorry cant help with that one.
September 5th, 2020 at 12:27 am
Any 2004 gsx250 invader crank case cove w magneto
September 7th, 2020 at 9:20 pm
Hi Dylan. I will have both the engine cover and stator assembly in stock. If you can email me at goodpartsnz@gmail.com I can then reply with further details including photos. Cheers Simon
September 21st, 2020 at 12:59 pm
Hey mate, am after a 2005/2006 Gsxr 1000 Fuel tank, have you got anything in stock?
Cheers, alex
September 21st, 2020 at 1:34 pm
Sorry I cant help with that one Alex. I have a K4 GSXR1000 here but I think they are different.
September 24th, 2020 at 5:41 pm
Hi was wondering if you had fairings for 2007 Suzuki bandit gsf1250s
September 24th, 2020 at 8:31 pm
Sorry cant help with those.
September 26th, 2020 at 10:26 pm
Hay man any year 2000 gsx 750 katana
September 27th, 2020 at 7:46 pm
I have dismantled a 2001 model but very few parts still in stock. What were you looking for?
September 28th, 2020 at 11:36 am
Hey mate, i contacted you via trade me recently. Regarding the GSX-R250 (GJ72A) fuel tank. If you’ve still got the one in stock, I’m keen to buy it regardless of condition. Cheers Rob
September 28th, 2020 at 5:48 pm
Hi Rob,
Ive taken some photos today, so please email me at goodpartsnz@gmail.com and I will reply with details including photos. Cheers Simon.
October 6th, 2020 at 3:30 pm
May i know if you have a mudguard plate holder for Suzuki hayabusa 2008 model. and how much in case. im in chch as well.
October 6th, 2020 at 7:13 pm
Sorry I cant help with that one. Cheers Simon
October 7th, 2020 at 6:21 am
thank you for the reply.
October 8th, 2020 at 1:15 pm
Hi I’m looking for a Suzuki katana fuel tank 1984 to 1986 model
Do you know of any for sale
Thanks
Regards Brian
October 8th, 2020 at 5:20 pm
Sorry I cant help with that one and havent seen any advertised recently. Cheers Simon
October 29th, 2020 at 9:36 pm
I have a 1987 suzuki gsxr 250 , I beleive my oltinator has gone as by bike is draining the battery even when riding and will cut out a d battery be flat after a short ride , do you have in stock the parts I could possibly need to fix the oltinator or a complete part?
October 30th, 2020 at 8:31 am
Hi Ryan. Your problem could be the stator (alternator) or the rectifier (regulates voltage). I suggest you find how how to test these with a multimeter before making any decisions on what parts you need. I will have both parts in stock, and you can email me directly, at goodpartsnz@gmail.com Cheers Simon
October 30th, 2020 at 1:40 pm
Hi
After a GSX750F 1996 FUEL PETCOCK
regards Nigel
October 30th, 2020 at 8:26 pm
Sorry I cant help with that one. Cheers Simon
November 2nd, 2020 at 5:31 am
Looking for 2011 gsxr 750 radiator
November 2nd, 2020 at 8:33 am
Sorry I cant help with that one.
November 2nd, 2020 at 9:49 pm
Hi good parts. This is a biggy. Have you got a seat for an 84 Katana GSX 750. Can you email me a list of parts you have for that model if possible.
November 3rd, 2020 at 8:16 am
Sorry i cant help with a seat for your Katana 750. I have a very small number of parts from that model in stock, although the engine and electrics are the same as the GSX750ESD. If you email me at goodpartsnz@gmail.com with details of what parts you may be looking for, I will reply with details if I have anything suitable in stock.
November 18th, 2020 at 9:28 am
Hi there, I’m after a piston and rings for a Suzuki TS185.
Cheers
Ben
November 18th, 2020 at 10:04 am
Sorry i cant help with those.
November 21st, 2020 at 5:49 pm
Hi do you have any aftermarket seats avail for a 1250 Suzuki Bandit? Cheers.
November 21st, 2020 at 8:30 pm
Sorry no.
November 29th, 2020 at 3:31 pm
Hi, i have a suzuki dl 650, year 2008.
I would need genuine suzuki right hand mirror, front brake leaver side. If not available i could be happy with a matching pair. If you would have a good condition skid plate i would be interested too.
Price cluding shipping to 49 roslyn str. Taumarunui 3920. Thanks
November 29th, 2020 at 8:43 pm
Hi Dirk. I cant help with a brake lever or skid plate. I do have what I believe is a factory RH mirror in good order at $35 plus $7 tracked postage. If you email me at goodpartsnz@gmail.com I can reply with photos. Cheers
December 2nd, 2020 at 9:17 pm
Hi I’m after a wiring harness for a gsxr400 1895 and the silver box behind the left hand side panel at the rear
December 2nd, 2020 at 9:34 pm
Hi. I can supply a wiring loom for the 1985 GSXR400 at $50 plus postage. I’m not sure what the silver box is that you mention, but could be the CDI/Igniter. If you can email me at goodpartsnz@gmail.com I will reply with details including photos. Cheers
December 7th, 2020 at 2:11 pm
Hey mate do you have a stator for 1989-1991 gsxr250?
December 9th, 2020 at 9:00 pm
Hi. Yes I can supply a stator(not the rotor) at $100 plus postage. If you email me at goodpartsnz@gmail.com I can supply further details including a photo. Cheers
January 19th, 2021 at 7:01 am
Hi there,
I’m in need of a speedo cable for my ‘92 GSF250 bandit.
Do you have any available?
Cheers, Tony.
January 19th, 2021 at 8:21 am
Sorry none in stock currently
January 21st, 2021 at 12:30 am
Hi I have a 2015 Suzuki gsxr 750 and I need a immobilizer antenna that goes on to the ignition barrel any help?
January 21st, 2021 at 8:35 am
Sorry I cant help with that one.
January 22nd, 2021 at 9:23 am
Hi again. I have an ignition switch with the immobilizer aerial from a K6 GSXR750 which may be the same. If you email me at goodpartsnz@gmail.com I can then send you photos to compare. Cheers Simon
February 7th, 2021 at 3:55 pm
Hey yah
Could you email me if you have the cdi unit for the 1995 Rf400 please
February 7th, 2021 at 9:16 pm
Sorry this has sold. I may have a CDI for a 2001 RF400V but not for the standard RF400.
February 7th, 2021 at 9:18 pm
Will that run my standard rf400
February 7th, 2021 at 9:21 pm
No
February 20th, 2021 at 6:30 am
Hey there after a rear brake caliper for 1998 rf900r
February 21st, 2021 at 12:23 pm
Hi. I can supply a rear brake caliper for the RF900 at $60 plus postage. If you email me at goodpartsnz@gmail.com I can reply with details including a photo. Cheers
February 20th, 2021 at 7:42 am
Hi I have a sv650s 2006 just wondering if you have a front brake lever and a front right blinker thanks
February 21st, 2021 at 12:27 pm
Hi Wayne. From memory the front and rear indicators are the same on that model. I should have something suitable in stock at $25 plus postage. If you email me at goodpartsnz@gmnail.com I can reply with details including a photo. Cheers
February 22nd, 2021 at 4:13 pm
Hi ,I’m looking for a gas cap with key for a vs1400 intruder
February 22nd, 2021 at 6:06 pm
Sorry I cant help with that one.
March 1st, 2021 at 10:17 am
Hi do you have a dash Speedo and tachometer for Gs 850 or GS 1000, thanks
March 2nd, 2021 at 5:20 pm
Sorry no.
March 15th, 2021 at 7:54 pm
Hi there i am after the cylider 2-3 ignition coil for my 1997 suzuki gsf250 bandit. Are you nz based? Cheere
March 15th, 2021 at 8:03 pm
Hi Jesse. I can supply the coil with leads and plug caps at $60 plus postage. I am based near Rangiora in Canterbury. If you wish to purchase, please email me at goodpartsnz@gmail.com and I will supply details including a photo. Cheers Simon
March 16th, 2021 at 1:35 pm
I’m in CHCH. I need a right rear indicator for 2004 Suzuki Intruder VS1400 in unmarked condition. Front left is identical. Also a header pipe flange bolt. Maybe 2 of those. You seem to have Intruders. Earlier Savage has same indicators as does earlier Boulevards. Am I able to drive out and get these things. Cheers. James.
March 16th, 2021 at 6:40 pm
Sorry I cant help with those James. I have some indicators from the early LS650, but they are far from being in perfect order, so wouldnt be suitable. If you email me at goodpartsnz@gmail.com I can get some photos.
March 19th, 2021 at 11:14 am
Hey
Was wanting too know if you had a petcock for a ls650 2008
March 19th, 2021 at 6:45 pm
Hi. I have a fuel tap from a 2017 LS650 in excellent order at $40 plus postage. If you email me at goodpartsnz@gmail.com I can provide details including a photo. Cheers
March 20th, 2021 at 8:51 pm
Hi, I have a 1988 GSXR250 (GJ72A).
I’m after both mirrors front windshield/visor and right-hand side foot peg bracket (not the peg but whole bracket- it has the muffler mount on it).
And possibly front and rear brake rotors (depending on condition)
Cheers Sam
March 20th, 2021 at 10:06 pm
Hi Sam. I cant help with mirrors, screen or brake rotors, but I can supply a RH alloy footpeg hanger (bracket) in good order at $50 plus postage. If you email me at goodpartsnz@gmail.com I can supply further details including a photo. Cheers Simon.
March 22nd, 2021 at 11:11 pm
Hi Simon. Just wondering if you have a wiring loom for a 83 suzuki 650 katana at all.
Cheers..Gary
March 23rd, 2021 at 8:25 am
Hi Gary. yes i have a loom from a 1982 650 Katana in stock at $40 plus postage. If you email me at goodpartsnz@gmail.com I can provide further details including a photo. Cheers Simon
March 24th, 2021 at 6:07 pm
Hi, I’m after the forks, front axle and triple clamps for a gen1 hayabusa,
Cheers Adam
March 24th, 2021 at 9:19 pm
Sorry I cant help with those.
March 28th, 2021 at 12:51 pm
Hi just wondering if u have oil cooler for Suzuki intruder vs1400. Is the vs700 the same cheers trev
March 28th, 2021 at 6:40 pm
Sorry I cant help with that one Trev. I have dismantled several VS700/750 models but they weren’t fitted with oil coolers.
April 3rd, 2021 at 8:11 pm
Hellow was wondering if you had a2004 gsx 250 oil cooler
April 3rd, 2021 at 9:13 pm
Hi. I can supply an oil cooler for the GSX250 Invader at $40 plus postage. If you email me at goodpartsnz@gmail.com I can provide further details.
April 26th, 2021 at 11:42 pm
Hi there, do you have a 2012 GSF1250S Bandit fuel tank, if so what is the price, thanks
April 27th, 2021 at 6:34 pm
Sorry no.
May 4th, 2021 at 12:29 am
Hi just wondering what colour and condition is the gen2 hayabusa tank in cheers
May 4th, 2021 at 9:46 am
Hi Keiran. I have two Gen 2 Hayabusa tanks in stock. One is blue and the other black and blue. Both factory colours I think and in very good order. If you email me at goodpartsnz@gmail.com I can send photos and further details. Cheers Simon
May 17th, 2021 at 10:07 pm
Still looking for a fuel tap for my 1987 gsxr 250 , please tell me you have one in stock?
If not don’t suppose you have the part number , been looking for months and can’t seem to find one
May 19th, 2021 at 1:25 pm
Sorry Ryan, nothing in stock. Ive double checked and even compared some other model fuel taps, but they are all different to the 250.
May 18th, 2021 at 3:55 pm
I’m in CHCH and need a clutch slave cylinder for my 2004 Suzuki Intruder 1400VS. You got anything thanks?
May 18th, 2021 at 9:28 pm
Hi James. I have a clutch slave cylinder from a VS750 which is likely the same as your 1400. If you email me at goodpartsnz@gmail.com I can then reply with details including a photo for you to compare. Cheers Simon
May 18th, 2021 at 10:13 pm
Hi Have you got a rear seat cowl for a 1999 GSXR750 SHRAD. WHITE??? Or 1 at least .
May 18th, 2021 at 10:37 pm
Sorry no.
May 21st, 2021 at 7:57 pm
Sir, mufflers for Suzuki Boulevard VL800, 2010. Price please.
May 21st, 2021 at 10:24 pm
Sorry all sold
June 1st, 2021 at 12:28 pm
Hi
Would you have a kick-start spring assembly for GT 125? Tim, Australia
June 1st, 2021 at 6:50 pm
Sorry I cant help with that one.
June 6th, 2021 at 10:47 pm
Looking for alternator gsxr1100w do you have one available
June 7th, 2021 at 4:50 pm
Hi. I have an alternator from a 1994 RF900 which I think is the same. If you email me at goodpartsnz@gmail.com I can reply with photos for you to compare. Cheers Simon
June 12th, 2021 at 12:28 pm
Hi! Do you have suzuki gsx 400x impulse, twin ignition coil 1987
June 12th, 2021 at 7:16 pm
Hi. Yes I should have some original Impulse coils with ;leads and plug caps, and I also have a pair that were fitted to an Impulse, but look to be from a Honda model and these are also complete with leads and plug caps. If you email me at goodpartsnz@gmail.com I can provide further details including photos.
July 4th, 2021 at 11:24 pm
Hi do you have any front forks for suzuki intruder vl250 2007 and front break lever ?
July 5th, 2021 at 10:01 am
Sorry all sold.
July 6th, 2021 at 7:25 pm
Hi iam after parts of the rg250 the particular part I want is the same for all model yrs , its called plate pillion hook…part number is 45325-16700.. it’s a metal plate bracket that’s bolted to the rear seat fairing .. and then the rear passenger seat hooks underneath it to hold In place. Its item 10 on the parts picture for rear seat ….
July 7th, 2021 at 10:17 am
Hi Bruce. I can see the part you require, and I may have one in stock from an 83 model, but will need to check before confirming. If you email me at goodpartsnz@gmail.com I will reply once Ive had a chance to look for the part. Cheers Simon.
July 20th, 2021 at 6:49 pm
Hi, I am looking for a do 650 abs rear break sensor 2012 ?
July 20th, 2021 at 7:43 pm
Sorry I cant help with that one.
August 18th, 2021 at 7:35 pm
Hi, I’m after the seat fairing off a 2002 GSX1400
August 18th, 2021 at 8:09 pm
Sorry I cant help with that one.
August 18th, 2021 at 10:38 pm
Hi I’m looking for a clutch lever and front indicator for a 2006 GSF1250s Bandit.
Please advise price and availability.
Regards Shane.
August 19th, 2021 at 1:50 pm
Hi Shane. i cant help with a clutch lever but I do have the factory clear lens indicators in stock at $30 each plus postage. Front and rear look to be the same. You can email me at goodpartsnz@gmail.com if you’d like further details. Cheers
August 26th, 2021 at 4:46 pm
Thanks.
I would like to order an indicator please.
Are they black plastic with clear lens /amber bulb?
What do I do next?
Shane.
August 26th, 2021 at 4:39 pm
Hi, I’m looking for a black/clear lens indicator assembly for a 2007 Suzuki Bandit GSF1250S.
Price including courier to the Wairarapa please.
Regards Shane.
August 30th, 2021 at 12:37 pm
Hi am after a alternator for a Suzuki bandit 1200 2002 model
August 30th, 2021 at 1:02 pm
Hi. I have an alternator from a 2001 Bandit 600 which appears to be the same type used on the 1200. $150 plus postage. If you are interested, you can email me at goodpartsnz@gmail.com and I can provide details including photos. Cheers Simon
August 31st, 2021 at 8:19 pm
Hi there, Do you have fuel tank n key for a 2008 SV650s…possibly SV1000 are the same??, cheers Mark
August 31st, 2021 at 8:37 pm
Hi Mark,
I have a couple of SV1000S tanks which should be the same as the 650S. I could supply a fuel tank plus a fuel cap with key. If you email me at goodpartsnz@gmail.com I can supply further details including photos. Cheers.
September 2nd, 2021 at 11:20 pm
Do you have the wiring loom from an fxr 150? Everything except cdi, and the bar switch blocks.
September 3rd, 2021 at 10:08 am
Sorry I cant help with that one.
September 3rd, 2021 at 9:55 pm
Hi team! I’m looking for a rear hugger to fit a Suzuki RF900R. I’ve been told it’s possible to fit a 1200 Bandit, would you have one. I know it’s a long shot.
Cheers!
Brett.
September 4th, 2021 at 10:25 am
Hi Brett. The Bandit 1200 like the RF900 didn’t use a rear hugger, however I have an aftermarket carbon fibre rear hugger that came with parts from a 2000 Bandit 1200. If you email me at goodpartsnz@gmail.com I can then provide details including photos. Cheers Simon
September 20th, 2021 at 11:13 pm
Hi Looking for the small hand bar at the back of seat for my GSF 1250 Bandit 2007
September 21st, 2021 at 8:51 am
Hi Richard. I have the factory pillion grab rail from a 2008 Bandit 1250 in stock at $40 plus postage. If you can email me at goodpartsnz@gmail.com I can provide further details. Cheers Simon
September 29th, 2021 at 8:39 pm
Hi, would you please advise price and availability for right front indicator assembly and mirror for a 2007 Suzuki Bandit GSF1250S.
Also a casual enquiry regarding complete front fairing for the same bike, preferably red in colour.
Regards Shane.
September 29th, 2021 at 9:39 pm
Hi Shane. Sorry I cant help with those parts currently. Cheers Simon
October 1st, 2021 at 10:03 am
After a tank & front fender for an 2007 Suzuki boulevard M109r model would you have these in shop please??
October 1st, 2021 at 12:46 pm
Sorry I cant help with those.
October 6th, 2021 at 7:58 pm
Hi how much for GSX 750F
Rear brake caliper
Front and rear brake pads
Fuel cap lock with key
Thanks Cue
October 7th, 2021 at 6:56 pm
Sorry I cant help with any of those currently. Cheers
October 9th, 2021 at 2:48 pm
Hi do you have a ignition pick up magnet for a 91 gk76a 400
October 9th, 2021 at 9:55 pm
Sorry I cant help with that one.
October 18th, 2021 at 9:01 am
Hi, looking for a most common spares for a vstrom250 (DL250A) let me know if u have parts available
October 18th, 2021 at 9:07 am
Sorry nothing in stock for that model.
October 24th, 2021 at 10:46 pm
Hi there, do you have a front brake calliper for a VL250?
October 25th, 2021 at 8:30 am
Hi Connor. I can supply a front brake caliper for the VL250 at $50 plus postage. If you email me at goodpartsnz@gmail.com I can provide further details. Cheers Simon
October 25th, 2021 at 3:55 pm
Hi I’m after all front fairings and front headlight for 2004 gsx250
October 25th, 2021 at 7:21 pm
sorry no fairings. Twin headlights and backing plate $120 plus postage.
October 30th, 2021 at 7:16 pm
Hi Allan,
Looking for the left hand side rear vision mirror for my 1997 Suzuki GS500E.
October 30th, 2021 at 9:04 pm
Sorry I cant help with that one. You might find it easier to buy a pair of matching aftermarket mirrors.
October 31st, 2021 at 4:04 pm
Hi im after a left side engin cover for my gsx750f 2002 and also the left mirrow
October 31st, 2021 at 7:23 pm
Sorry I cant help with those.
November 2nd, 2021 at 9:24 pm
Hi,
I’m after the two rubber grommets attached to the side mounts of the headlamp of a 2007 Suzuki GN250 if you have them?
Thanks Steve
November 3rd, 2021 at 8:22 am
Hi Steve. I’m sure I will have a couple of those in stock. If you email me at goodpartsnz@gmail.com I will check today and then reply with details. cheers Simon
November 3rd, 2021 at 10:25 am
Hi im after a couple of 5 mm x 16 long chrome ferring bolts for my gsx750f can you help please
On Wed, 3 Nov 2021, 5:22 am Good Parts Motorcycle Dismantlers, wrote:
> goodparts commented: “Hi Steve. I’m sure I will have a couple of those in > stock. If you email me at goodpartsnz@gmail.com I will check today and > then reply with details. cheers Simon” >
November 3rd, 2021 at 5:31 pm
Email me directly, at goodpartsnz@gmail.com and I will see if I can help. Cheers
November 4th, 2021 at 7:32 pm
Hi I’m after a front brake caliper for my 2004 gsx250 it’s just single front would you have anything that’ll work
November 4th, 2021 at 7:40 pm
Hi Sidney. Yes I should have a front brake caliper in stock for the GSX250 Invader. If you can email me at goodpartsnz@gmail.com I will have a look tommorow and then reply with details including a photo. Cheers Simon.
November 6th, 2021 at 8:19 am
Hi, I’m looking for a motor for a 2003 VL1500 Intruder. I just need the bottom end but will take a complete motor if you have 1.
November 6th, 2021 at 8:50 am
Hi. thanks for your enquiry. I have a 2007 VL1500 in stock with a damaged head, but its the injected model so I suspect the bottom end may be different. I also have a 1999 VL1500 which may be the same as your 2003 model as its still the carb model. If you email me at goodpartsnz@gmail.com I can supply further details. Cheers Simon
November 6th, 2021 at 12:56 pm
After parts ,fairings,visor and engine 2003/04 gsxr 1000 k4
November 7th, 2021 at 10:00 am
Sorry I cant help with those currently.
November 20th, 2021 at 9:09 pm
Hey there, what do you have in the way of slip on exhausts for a 07 GSF 1250 SA? Not bothered about brand , just after a nice note
November 21st, 2021 at 8:23 am
Sorry no.
December 1st, 2021 at 12:40 am
Hi would you any parts for a 1985 gsxr750f ? chasing small brackets like side stand bracket with switch , rear seat cowl, what do you have ?
Regards Rob.
December 1st, 2021 at 8:01 am
Hi Rob. I have a small number of parts in stock from a GSXR750G/H which will likely be the same as the F model. I should have a side stand switch and a side stand assembly in stock, but not a seat cowl. If you email me at goodpartsnz@gmail.com I will reply with details including photos. Cheers Simon
December 2nd, 2021 at 8:08 pm
Kiaora Simon. I am currently looking for the seat cover for my 1997 Suzuki GS500E. The original one got a white latch attach to the front end close to the fuel tank.
December 2nd, 2021 at 8:24 pm
Sorry no seats in stock for the GS500 currently.
December 9th, 2021 at 12:26 pm
Looking for front and rear wheels GSX1250 2005 or newer
December 9th, 2021 at 6:26 pm
Hi Richard. I can supply a pair of wheels from a 2007/2008 Bandit 1250 at $500/pair. The rear wheel would include the cush rubbers and sprocket carrier. If you’d like further details, please email me at goodpartsnz@gmail.com Cheers Simon
December 14th, 2021 at 6:27 pm
Hi have you got a cdi for a 2003 gsx 250 i am also after right side brake lever and some other items have you got a number I can call
December 14th, 2021 at 7:22 pm
Sorry I cant help with a CDI or brake lever. The CDI and CDI pick up coils are a problem in this model and you will find them hard to come by. ies are preferred and you can email me at goodpartsnz@gmail.com Cheers
December 15th, 2021 at 6:15 pm
Hi i am seeking fork stanchions brake calipers and master cylinder or kits for a 1976 suzuki gt750 if you can help and if so what kind of price range would I be looking at
December 15th, 2021 at 10:16 pm
Sorry I cant help with those.
December 28th, 2021 at 6:55 am
Hi, do you have a rf indicator assembly for a 2007 Suzuki Bandit GSF1250S, white lens/amber bulb in stock?
Regards Shane.
December 30th, 2021 at 8:39 am
Hi Shane. Not fully back at work until after New Year, but should be able to help with this one. Please email me at goodpartsnz@gmail.com and we can go from there. Cheers Simon
January 7th, 2022 at 3:38 pm
Hi there,
I am after several parts for a 1980 TS250 if you have any in stock.
Cheers Simon
January 7th, 2022 at 3:44 pm
Sorry I cant help with parts for that model.
January 9th, 2022 at 11:06 pm
Gidday wondering wether you have a Solenoid and the cable that feeds to the Starter motor?
for a 2006 GN250
January 10th, 2022 at 8:30 am
Hi Tate. I will have a solenoid in stock at $25 plus postage, but don’t think I will have the cable from the solenoid to the starter motor. You can email me at goodpartsnz@gmail.com if you’d like further details. Cheers
January 26th, 2022 at 5:42 pm
Hi Ian
Do you have a grab rail for a 2006 1250 Bandit
January 26th, 2022 at 7:46 pm
Hey I have Suzuki 750f 1990 model need fairings and blinkers please
January 26th, 2022 at 10:42 pm
Sorry I cant help with those.
January 28th, 2022 at 9:36 pm
Hi
Do u have any gsx750 80-82 alive frame?
Tnx
January 28th, 2022 at 9:43 pm
Sorry no.
February 6th, 2022 at 12:21 am
suzuki vz800 Tbars, one piece
February 6th, 2022 at 8:45 am
Sorry I cant help with those.
February 8th, 2022 at 12:50 pm
Is the 1989 Gn250 bike parts compatible with the 2004 gn250cc
February 8th, 2022 at 6:46 pm
Hi. Yes all parts should be interchangeable
February 10th, 2022 at 5:01 pm
Hi Ian do you have a left hand lower fairing for a gsx250 2004?
February 10th, 2022 at 6:33 pm
Sorry no
February 11th, 2022 at 3:04 pm
Hello there I’m after 95 GSXR 1100 W spark plug caps or 4 if possible please
Regards Bevan
February 11th, 2022 at 4:06 pm
Sorry I cant help with those.
February 16th, 2022 at 1:22 pm
Hi there do you guys have a front rim to suit a 07 VL250 Intruder, cheers
February 17th, 2022 at 3:18 pm
Hi do you have suzuki 2010 gsx650f forks cheers
February 17th, 2022 at 4:06 pm
Sorry no
February 18th, 2022 at 4:22 am
Hi, I’m after two front fork caps for a 2004 Suzuki GN250. Do you have these and how much? Thanks Dean
February 18th, 2022 at 9:02 am
Sorry I cant help with those Dean. Cheers
February 28th, 2022 at 10:05 am
Hello, looking for a gn250 engine to suit 2006 model
February 28th, 2022 at 12:40 pm
Sorry all engines sold currently.
March 8th, 2022 at 3:51 am
Hey am after a choke cable for 1997 gsxr 250
March 8th, 2022 at 8:26 am
Sorry I cant help with that one.
March 8th, 2022 at 8:37 am
Hi, am after two front fork top caps for 2004 Suzuki GN250 please
March 8th, 2022 at 8:38 am
Sorry I cant help with those.
March 8th, 2022 at 12:00 pm
Hi, I’m after a Gsx1400 front RH Brake Lever. Would you have one and how much to supply & freight to Napier. Thanks.
Brian
March 8th, 2022 at 12:58 pm
Sorry I cant help with that one.
March 9th, 2022 at 9:58 pm
Hey just looking for blinkers for a 1990 gsx 750f
March 16th, 2022 at 10:55 am
Hi,
I’m after a mirror mount only ( either side ) for a VL1500 Suzuki.
Thanks
Keith
March 16th, 2022 at 8:38 pm
Sorry I cant help with that one.
March 18th, 2022 at 10:28 am
Hi there, any chance yo have a complete fuel tank for a 2000 Suzuki TL1000R? Thanks
March 18th, 2022 at 8:20 pm
Sorry no.
March 19th, 2022 at 7:56 am
Hi do you any gsx1400 forks? If so a price please
March 19th, 2022 at 9:08 am
Sorry no
March 20th, 2022 at 12:33 am
Hi is the exhaust system on the VL800 stock or after market? Cheers
March 21st, 2022 at 7:16 pm
Sorry sold
March 22nd, 2022 at 3:47 pm
Is the front fender available?
Cheers
March 22nd, 2022 at 5:42 pm
Sorry no
March 26th, 2022 at 5:47 am
Hi looking for a cdi for a gz250 8pin
March 26th, 2022 at 9:09 am
Sorry I cant help with that one.
March 30th, 2022 at 1:17 pm
Hi I have a 1995 gsx 550 ef .would you crank pulse sensors? Cheers Paul
March 30th, 2022 at 2:54 pm
Hi Paul, sorry I cant help with that one. There’s a good chance the bike is one I used to own. I sold the Pulse coils to a customer and then sold the complete bike to another person who was going to use it to make one good bike from two. Since then its changed hands many times and I’ve lost count of the number of times I’ve been asked for pulse coils!
April 1st, 2022 at 11:19 am
Hi do you have suzuki gn250 frame and set of forks and how much thanks ?
April 1st, 2022 at 12:20 pm
Sorry nothing in stock currently.
April 2nd, 2022 at 7:59 am
Hey mate, I’m looking for a rear fender assembly and full exhaust system for a 2006 Suzuki intruder 250. Any and all help would be greatly appreciated, cheers
April 3rd, 2022 at 10:40 am
Hi Jake,
I will have a rear mudguard in stock and also parts such as the tail light and number plate bracket etc, but no exhaust system. If you can email me at goodpartsnz@gmail.com and let me know if its just the rear guard or if you need other parts such as the tail light, I will then reply with details including photos. Cheers Simon
April 5th, 2022 at 11:13 am
I am looking for a fuel tank that will fit a 2009 Suzuki VL800 as well as a right footpad and lever
April 5th, 2022 at 3:06 pm
Sorry I cant help with those
April 5th, 2022 at 3:05 pm
Hey there, do you have a full working vl250 intruder engine I can purchase?
April 5th, 2022 at 3:06 pm
Sorry all sold currently
April 7th, 2022 at 12:32 pm
Do you have a clutch lever perch with mirror for suzuki gn250 2004 bike
April 7th, 2022 at 6:37 pm
Sorry not currently.
April 8th, 2022 at 1:56 am
Do you have a cylinder barrel for 90s gsxr250 gj72a motor? How much for shipping to United states?
April 8th, 2022 at 7:02 pm
Hi . I do have one GSXR250 GJ72A cylinder block in stock. Will most like be a standard bore (measures approx 48.6mm). One cylinder does have some light scoring while the other 3 are unmarked. If you email me at goodpartsnz@gmail.com I can reply with details including photos and can also get the postage cost for you if it looks suitable. Cheers Simon
April 9th, 2022 at 10:05 am
Hey and blinkers and fairings for 91 gsx 750f
April 9th, 2022 at 6:33 pm
Sorry I cant help with those.
April 9th, 2022 at 4:03 pm
Hey, I’m after a Suzuki muffler wanting to replace a dr650 factory unit with factory gsxr600-1000 or similar. Do you hane anything? Cheers Paul
April 9th, 2022 at 6:39 pm
Sorry I cant help with that one Paul. Ive sold a few mufflers for that purpose in the past. Cheers
April 18th, 2022 at 12:51 am
Hi there,
I’m after a fuel petcock for a 1998 Suzuki GS500E. Do you have anything compatible in stock?
Regards,
Oliver
April 19th, 2022 at 9:50 am
Hi Oliver. I have both the fuel tank outlet assembly and the remote mounted fuel tap in stock. If you email me at goodpartsnz@gmail.com I can reply with details including photos. Cheers Simon
April 21st, 2022 at 3:23 pm
hi do you have any front fairing + allset of electronic ignition for suzuki gs 450 1980 $$+shipping to Nelson nz cheers
April 22nd, 2022 at 9:47 am
Sorry I cant help with those.
April 23rd, 2022 at 6:58 pm
Hi would you have a pair of 1986 dr200 side covers?
April 23rd, 2022 at 10:02 pm
Sorry no
May 3rd, 2022 at 3:05 pm
Hi do you have a alternator for a 2003 gs1200ss? Thanks
May 3rd, 2022 at 7:03 pm
Sorry I cant help with that one.
May 5th, 2022 at 1:48 pm
do you have good rear shock for gsxr250 1989?
May 5th, 2022 at 4:43 pm
Hi. I will have a used rear shock from the GSXR250 in tidy order and no sign of fluid leakage etc, at $100 plus postage. If you email me at goodpartsnz@gmail.com I can provide further details. Cheers
May 16th, 2022 at 2:31 pm
Hi im after an exhaust/expansion chamber for a suzuki tf125
May 16th, 2022 at 8:04 pm
Sorry I cant help with that one
May 23rd, 2022 at 9:19 am
Hi was wondering if you had top end for a suzuki savage 650 ?
May 23rd, 2022 at 6:54 pm
Hi. I do have some engine p[arts from a 2007 LS650 that had run a bottom end bearing. I have a head assembly although the cam shaft is pitted and probably no good. If you email me at goodpartsnz@gmnail.com I can provide further details including photos. Cheers
May 26th, 2022 at 5:44 pm
Hi, would you have a fairing to suit a 2007 Suzuki Bandit GSF1250S, and if so what colour?
Regards Shane.
May 26th, 2022 at 6:19 pm
Sorry no. Mine were all damaged.
May 25th, 2022 at 10:08 pm
Hi
Do you have a seat lock and clocks for a Suzuki gt550?
Regards Mike
May 26th, 2022 at 10:23 am
Sorry no.
May 27th, 2022 at 11:59 pm
After a starter off Suzuki savage 650 1988 can u help ?
May 28th, 2022 at 10:21 am
Yes I can supply a starter motor in good order at $100 plus postage. If you email me at goodpartsnz@gmail.com I can then reply with further details. Cheers
May 31st, 2022 at 10:26 pm
Have you got a Suzuki gn 250 gear light box, tachometer,no cable needed,right side black cover,qoute pl
June 1st, 2022 at 9:26 am
Hi Stephen. I can supply a GN250 centre console which includes the gear position indicator at $40 and also a tachometer at $60 plus postage. If you’d like further details, please email me at goodpartsnz@gmail.com Cheers Simon
June 1st, 2022 at 10:58 pm
how’s it u wouldn’t have the hole wire loom and carbys and cdi box for 1989 Suzuki intruder. and a set off gsxr 400 carbys u able to gizz a txt on 02040931036or email me on haydena362@gmail.com
June 4th, 2022 at 10:50 pm
Hi, after the bottom triple clamp cover with the suzuki or S emblem on it for gs 850 or similar models 750 or 1000.
June 5th, 2022 at 6:07 pm
Sorry I cant help with that one.
June 11th, 2022 at 7:58 pm
I am trying to findset of quad throttle bodies of a Gen 2 gsxr1300 hayabusa. Do you have anything model year and rough price?
June 11th, 2022 at 10:25 pm
Sorry I cant help with that one.
June 28th, 2022 at 10:02 pm
Hi
Just wondering if you had a 2nd hand bike rack in all your parts for a GSX250SF so I can fit a back boxs
June 29th, 2022 at 10:14 am
Sorry I cant help with that one.
July 3rd, 2022 at 2:39 pm
Do you have a starter motor for gsf 250 bandit?
July 3rd, 2022 at 7:08 pm
Hi Robson.
I can supply a starter motor for the Bandit 250 at $80 plus postage. I am only available to package parts tomorrow (Monday) before heading away for several weeks, so if you are interested, please email me at goodpartsnz@gmail.com ASAP.
August 4th, 2022 at 8:28 pm
Cdi for a suzuki bandit 250cc? If so, how much please?
August 5th, 2022 at 10:22 am
Hi Peter. I may be able to help but need to know the exact model/year as there are several different type of CDI and they are not interchangeable. Please email me with the details at goodpartsnz@gmail.com Cheers Simon
August 17th, 2022 at 3:32 pm
Left and right bottom fairing gsx750f 2001 please
August 17th, 2022 at 3:54 pm
Sorry I cant help with that one.
August 17th, 2022 at 3:55 pm
Giddy after bottom fairing left and right for gsx750f 2001
August 23rd, 2022 at 10:51 am
Hi do you have a Petrol tank for a 1984 Suzuki katana 750 Cheers
August 23rd, 2022 at 10:52 am
Sorry no
August 31st, 2022 at 1:00 pm
Hi guys
Suzuki GS1100G 83 – 85 exhaust system or slip on muffler. Thank you
Cheers
Steve Klaui
August 31st, 2022 at 1:18 pm
Sorry I cant help with that one.
September 3rd, 2022 at 10:42 pm
Hi there im after a starter motor for a 250 bandit. The across has the same starter. How much would it be to send to tauranga? Cheers Asher
September 4th, 2022 at 8:09 pm
Hi. I can supply a Bandit 250 starter motor at $85 plus postage. If you email me at goodpartsnz@gmail.com I can supply details including a photo. Cheers Simon
September 4th, 2022 at 3:36 pm
Hi there, do you have a top fairing in white and headlight for a 1996 gsxr1100w? Cheerz
September 4th, 2022 at 8:11 pm
Hi. I have a top fairing in stock although its not white. Also a headlight which may be suitable. If you email me at goodpartsnz@gmail.com I can reply with details including photos. Cheers
September 22nd, 2022 at 8:21 pm
Do you have a vl800 motor (going)
September 23rd, 2022 at 9:38 am
Hi Howard, I have a 2007 VL800 C50 just arrived in but the engine has just been sold to Auckland Motorcycle Services for one of their customers. Cheers Simon
September 25th, 2022 at 11:36 am
Hi there do you have a gn250 carburetor at all please
September 25th, 2022 at 1:03 pm
Sorry all sold.
November 13th, 2022 at 6:13 pm
Hi looking for right front disc for 1981 GSX750 Et
November 13th, 2022 at 7:19 pm
Hi Karl,
I have a couple of front brake discs that were marked as having come from an 81 GSX750/1100. If you can email me at goodpartsnz@gmail.com I will check these out tomorrow and then get back to you with details including photos and the disc thickness. Cheers Simon
November 16th, 2022 at 6:13 pm
Hi, chasing some fork lowers for a Suzuki vs1400?
November 16th, 2022 at 6:25 pm
Hi. I have a pair of forks from a 2008 VS800 which I think are identical to the 1400. I could only supply a complete pair of forks, but if you are interested, please email me at goodpartsnz@gmail.com Cheers
November 16th, 2022 at 7:47 pm
Hi,
I have an 82 GS1100G – model z. I am looking for a left hand switch block/assembly and a set of rear shocks. I believe the switch assemblies are th we same up to an 86 model for both D & Z models. I noticed that you are wrecking a GS1100G, do you have an switch Block available?
Thanks
November 16th, 2022 at 7:49 pm
Sorry all sold
November 25th, 2022 at 10:04 am
Hi I am looking for a 1992 Suzuki GSF bandit 250cc engine. Was also wondering if you knew of any other engines that I could swap into that model staying at 250cc
November 25th, 2022 at 12:11 pm
Hi.
I have a 1993 bandit 250 in stock (yet to be dismantled). The bare engine (without starter motor and carbs) suitable as a transplant would be $500 plus shipping. If you’d like more details, please email me at goodpartsnz@gmail.com
November 29th, 2022 at 5:25 pm
Hi any engine crash bars for a 02 GSX 1400, Thanks
November 29th, 2022 at 9:25 pm
Sorry no.
December 20th, 2022 at 7:24 am
Hey there.
Can you supply a starter motor for a 2004 Suzuki vz800 Marauder? Will need shipping to Wainuiomata, Lower Hutt 5014.
Thanks in advance.
December 20th, 2022 at 9:22 am
Hi. I have a starter motor from a 2007 VL800 which should be the same as the VZ800 starter. Might pay to check compatibility with a Suzuki dealer first. $100 plus $6.40 tracked postage or $11.20 if its an RD address. You can email me directly, at goodpartsnz@gmail.com
December 23rd, 2022 at 4:49 pm
Need rear brake pedal for a RF900 plz
December 23rd, 2022 at 5:29 pm
Sorry I can’t help Paul (you have already emailed me directly)
January 2nd, 2023 at 2:51 pm
Hi do you have a wiring loom for a suzuki gsf250 bandit
January 2nd, 2023 at 5:48 pm
Hi. Which model, GJ74A or GJ77A?
January 5th, 2023 at 10:45 am
I have suzuki t500 ‘s. Always looking for any parts. Can you tell me what suzuki gt500 parts you have left please.
January 5th, 2023 at 11:59 am
Sorry, I had a customer who recently purchased all the T500 parts I had in stock.
January 24th, 2023 at 1:37 am
Hi there just looking for a price on a cylinder head for a 1997 gsf250 bandit
January 24th, 2023 at 9:06 am
I cant help with a cylinder head, but I do have a bare engine (without carbs and starter motor etc) in stock. You can email me at goodpartsnz@gmail.com if you are interested. Cheers
January 24th, 2023 at 12:01 pm
Hi there how muvh for the bare motor fot the gsf250 bandit pls
January 24th, 2023 at 1:01 pm
$500 plus shipping. Please email me directly at goodpartsnz@gmail.com if you’d like more details.
March 4th, 2023 at 2:42 pm
Hey there, do you have any pillion pegs for a 1995 Suzuki Across GSX250F?
March 4th, 2023 at 9:30 pm
Yes I can supply pillion footpegs in good order at $40/pair plus postage. Please email me at goodpartsnz@gmail.com if youd like further details. Cheers Sim,on
March 5th, 2023 at 8:30 pm
Looking for a cluster foe a Suzuki vs 750 2007.
Sipping to South Africa?
March 6th, 2023 at 8:01 am
Hi Pieter. The Suzuki VS750 model only ran until 1981, when the VS800 model commenced. If you could clarify the model/year and also the part you are looking for as Im not sure what you mean by a cluster. You can email me directly at goodpartsnz@gmail.com Cheers Simon
March 19th, 2023 at 10:26 pm
Hi,
Looking for a centre stand for a 2010 dl1000 suzuki. I see you have a couple of 2008 models which is the same shape as mine.
Thanks
Darren
March 20th, 2023 at 8:46 am
Sorry all sold
March 25th, 2023 at 9:40 am
Hey dude after a cdi unit for a 1985 gsx400 Ed
March 25th, 2023 at 9:44 am
Sorry I cant help with that one.
March 26th, 2023 at 9:57 am
Hi, do you have a temperature sensor for a GSXR250 1989 (GJ73A engine) ?
Thanks!
March 26th, 2023 at 10:14 am
Hi. Yes I should have this in stock. I will have a thermostat housing which has both temp sensors attached. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers
March 27th, 2023 at 12:09 pm
Good day,
I’m after a few cosmetic components for a 2002 SuzukiGSX-R600. Do you have a fairly decent bike that you are possibly wrecking? I have a bike I am restoring and pretty much all fairings, headlight, gearlever, front brake reservoir, seats, indicators, head cowling for speedo to mount to, mirrors, all lights, tail panels, possibly fuel tank and I’m sure there are some parts I’m missing.
Regards
Claude
March 27th, 2023 at 12:11 pm
Sorry I cant help with those. The only parts I have from a 2001 GSXR600 are engine/electrics.
March 28th, 2023 at 8:03 pm
Hey I just want front and bk wheels for gsx250
March 28th, 2023 at 8:39 pm
Hi. If this is the GSX250 Invader, I can supply a 300×17 front wheel and a 350×17 rear wheel (including cush rubbers and sprocket carrier) at $300/pair plus shipping. If you would like further details, please email me at goodpartsnz@gmail.com Cheers Simon.
March 29th, 2023 at 11:40 am
Hi
I’m looking for a set of front foot rests to fit a vl800 saddlebags.
March 29th, 2023 at 1:15 pm
Hi. I have a couple of VL800’s just arrived in, both have riders footboards. If these are what you are wonting, please email me at goodpartsnz@gmail.com
April 19th, 2023 at 6:25 pm
Hi,
I need parts for a Suzuki Bandit 1200s 2006 K6 it’s the cross over version but oil cooled carb version. Need the following.
Front fairing
RHS mirror
Tank
Mine is black so ideally black parts please.
Simon
April 19th, 2023 at 7:58 pm
Sorry I cant help with those.
May 28th, 2023 at 3:16 pm
Gj73a stator magnets or complete flywheel do you have available?
May 28th, 2023 at 5:48 pm
Sorry I cant help with that one.
July 22nd, 2023 at 7:52 pm
Hey buddy,I’m wondering if you might have the side covers for a 2009,m50 vz800 Suzuki boulevard…the inner one that covers the tool compartment and the outer one with the key lock on it…thankyou…
July 23rd, 2023 at 10:26 am
Hi Shane. Yes I should be able to help with those. Please email me at goodpartsnz@gmail.com and I can reply with details including photos. Cheers Simon
July 30th, 2023 at 10:24 pm
I asked the question about the K3 SV1000 riders seat on Trademe.
I’ll be in Rangiora in around 3 weeks time for a few days, can I pick the seat up then?
July 30th, 2023 at 10:45 pm
Hi Craig,
that should be fine. If you email me at goodpartsnz@gmail.com I can send details including photos. Cheers Simon
September 8th, 2023 at 5:19 pm
Hi
Looking for an exhaust for a 1977 gs550.
Cheers Duane
September 8th, 2023 at 11:33 pm
Sorry I cant help with that one.
October 15th, 2023 at 3:44 pm
Gday, im searching for a suzuki 250 VL Intruder carburettor?
October 16th, 2023 at 12:18 pm
Hi John.
I have a VL250 carbs available at $100 plus postage. Please email me at goodpartsnz@gmail.com if you’d like further details. Cheers Simon
October 20th, 2023 at 10:36 pm
I am looking for a suzuki intruder 2009 fuel tap
October 21st, 2023 at 8:28 am
Hi. I have a fuel tap from a 2008 VS800 in stock at $40 plus postage. If you email me goodpartsnz@gmail.com I can provide more details including a photo.
November 1st, 2023 at 7:51 pm
Any chance of you have rear tail stop light for m109r 2013?
November 1st, 2023 at 10:08 pm
Hi. I have a tail light from a 2016 M109R (clear lens) and also another from a 2008 model (orange lens). If you email me at goodpartsnz@gmail.com I can provide details including photos.
December 8th, 2023 at 12:24 am
I’m trying to find a complete rear break caliper for a 1997 Suzuki Bandit S 600.
December 8th, 2023 at 8:14 am
Hi. I should have a suitable rear caliper in stock. Please email me at goodpartsnz@gmail.com and I can then send you photos to compare.
December 17th, 2023 at 9:36 pm
Hi, do you have an indicators control switch for a 1980 GS450? Cheers. Bab
December 18th, 2023 at 8:04 am
Hi. I should have a LH switch block from a GSX400E which I think is the same as the GS450. If you email me at goodpartsnz@gmail.com I can then reply with details including photos. Cheers
February 8th, 2024 at 3:48 pm
Good afternoon does the Suzuki VZ800 2012 gas cap and ignition come with keys
February 8th, 2024 at 4:36 pm
Yes they do (otherwise I wouldnt keep them). If you email me at goodpartsnz@gmail.com I can reply with a photo.
February 21st, 2024 at 10:07 pm
Hey bud,
I’m looking for a fuel tank that’ll fit a 1998 Suzuki TL 1000S please and thanks..
Churs..
February 22nd, 2024 at 8:55 am
Sorry I cant help with that one.
March 12th, 2024 at 8:10 am
Hey,
Do you have a 1989 GSXR-250 air box available?
March 12th, 2024 at 9:20 am
Hi Nicholas. I have a complete airbox assembly from the GSXR250 in stock. Please email me at goodpartsnz@gmail.com for further details including a photo. Cheers
March 24th, 2024 at 11:07 am
do you still have the front right indicator light Tali light cover an front brake lever for the Suzuki vz800 2012 cheers
March 24th, 2024 at 12:33 pm
Sorry I cant help with those.
March 29th, 2024 at 12:32 pm
hi after a cdi for 03 suzuki vz800
March 29th, 2024 at 2:48 pm
sorry I cant help w3ith that one.
April 5th, 2024 at 10:58 am
hi, am looking for a 2003 GSXR1000 L/H foot peg and possibly gear lever.
April 5th, 2024 at 12:29 pm
Sorry I cant help with that one.