Below is a list of Kawasaki motorcycle models currently in stock. Some models may have all the motorcycle parts available, some may only have a few parts left.
Email us on goodpartsnz(at)gmail(dot)com for any enquiries. We ship anywhere in New Zealand, Australia and other international destinations
Kawasaki Motorcycles
| Make | Model | Year |
| Kawasaki | ZZR250 | 1990-1993 |
| Kawasaki | GPZ750 | 1983 |
| Kawasaki | ZXR250C | 1991 |
| Kawasaki | ZZR600 | 1990 |
| Kawasaki | KR250 | 1984 |
| Kawasaki | GPX400 | 1988 |
| Kawasaki | GPZ1000 | 1986 |
| Kawasaki | ZZR1100 | 1997 |
| Kawasaki | ZR250 Balius | 1994 |
| Kawasaki | GPZ900 | 1984 |
| Kawasaki | ZXR250A | 1989 |
| Kawasaki | GPX250 | 1987 |
| Kawasaki | ZZR600 | 2004 |
| Kawasaki | ZX9 | 1998 |
| Kawasaki | ER500 | 1997 |
| Kawasaki | ZX9 | 1994 |
| Kawasaki | ZXR400 | 1990 |
| Kawasaki | ZXR750 | 1992 |
| Kawasaki | GPX750 | 1988 |
| Kawasaki | GPZ250 | 1987 |
| Kawasaki | KR1 | 1988 |
| Kawasaki | ZZR400 | 1990 |
| Kawasaki | ZX6R | 1998 |
| Kawasaki | GSR250 | 1988 |
| Kawasaki | KE100 | 1975 |
| Kawasaki | S2 250 | 1975 |
| Kawasaki | GPZ500 | 1992 |
| Kawasaki | ZZR1100C | 1993 |
| Kawasaki | GPX750 | 1988 |
| Kawasaki | GPZ400 | 1988 |
| Kawasaki | GPZ305 | 1984 |
| Kawasaki | EX250 | 1984 |
| Kawasaki | GTR1000 | 1991 |
| Kawasaki | ZX6R | 1995 |
| Kawasaki | GPX250 | 2007 |
| Kawasaki | ZX10R | 2006 |
| Kawasaki | Z750 | 2004 |
| Kawasaki | GPX600 | 1988 |
| Kawasaki | ZX6R | 1999 |
| Kawasaki | ZX6R | 1995 |
| Kawasaki | EX650A | 2008 |
| Kawasaki | ER650R | 2011 |
Good Parts Motorcycle Dismantlers 
December 15th, 2010 at 9:54 am
need a engine to fit a en454ltd or similier for hardtailframe any sugestions please
December 15th, 2010 at 9:41 pm
Hi.
Thanks for your enquiry.
The nearest I would have is a Suzuki GSX400E engine. This is an aircooled engine (so no need for a radiator) and should look the part in a hardtail frame. They are a reliable engine and this one ran well before the bike was dismantled. Looking at $800 for the complete engine package, including engine,carbs, header pipes, loom and electrics. I can send photos if you are intersted. Cheers Simon
September 28th, 2022 at 9:39 am
Hi I am after a r/h front indicator for 2007 GPX 250. Do you have any?
Cheers Jon
September 28th, 2022 at 12:14 pm
Sorry nothing in stock currently.
August 1st, 2023 at 5:41 pm
Hi there, do you have any front brake rotors for zxr250c
August 1st, 2023 at 6:07 pm
Hi Geoff. I cant help with a suitable engine, but I should have one pair of front discs in stock for the ZXR250C. If you email me at goodpartsnz@gmail.com I can provide details including photos. Cheers Simon
June 1st, 2011 at 8:54 pm
Hey Im trying to find a front fairing and left hand side fairing (over radiator) for a Kawasaki Z1000 2005. Can you let me know if you have either
June 1st, 2011 at 10:30 pm
Sorry Shamus, cant help with any parts from that model. cheers Simon
September 14th, 2011 at 10:34 am
Hi, I’m looking for a kawasaki zzr 1100 fuel pump. Thanks
September 14th, 2011 at 9:09 pm
Sorry cant help with that one.
November 6th, 2011 at 3:48 am
Hi I’m after a rear wheel (with cush drive if poss) for a zx9r 1998 or 1999 If you can help.
cheers
Lee
November 6th, 2011 at 9:16 am
Hi Lee,
Yes I can supply a rear wheel complete with cush drive from a 1998 ZX9R in good order at $250 plus freight. Email me directly at goodpartsnz@gmail.com and I can supply detials incuding a photo.
Cheers Simon
May 1st, 2022 at 12:06 pm
Wondering if you have a zzr 600 engine and loom for sale??
November 8th, 2011 at 10:28 pm
Hi Simon
Any chance you can email me the details and some pics of the wheel please on leebainbridge@hotmail.com.
Also do you still have the sprocket carrier?
Cheers
Lee
November 8th, 2011 at 10:33 pm
Emailed you last night Lee including a photo. have done so again tonight, so check your spam inbox in case its sitting there. Cheers Simon
December 1st, 2011 at 8:32 pm
Hi, the GPZ1000rx you have, would the front mudguard be availiable, and any idea if it would fit an 88 ZX10?
Cheers
Ross
December 1st, 2011 at 10:04 pm
Hi Ross. I do have the GPZ1000 front guard, but comaparing with photos of the ZX10, it looks quite difefrent. Forks are very different too. Cheers Simon
December 8th, 2011 at 9:29 am
hey i was wondering if the airbox of the zxr250c 1991 would fit a 1990 zxr250? and if u have it
December 8th, 2011 at 8:51 pm
Hi Ezra. The ZXR is completely different, but I have a ZZR250 airbox in stock at $50. Will email you directly with details. Cheers Simon
December 10th, 2011 at 9:14 am
hi there, i am wondering if you would have a running zzr250 motor, and front forks?
if so, could you please advise conditions and costs?
thank you, Karl.
December 13th, 2011 at 6:04 pm
Hi Karl. Sorry cant help with a good engine (sold one just last week) but I do have forks. I have two sets available and from memory, both are in tidy order with good chrome. I think one has dry seals while the other has weeping seals which will need replacing. Email me directly at goodpartsnz@gmail.com and I can check them out and provide you with more details. Cheers Simon
January 6th, 2012 at 3:45 pm
Hi, Im looking for the cush drive rubber for my 92 zxr250C. Are there any other rubber from other models that will fit? Thanks
January 6th, 2012 at 6:37 pm
Hi Calvin,
I have a rear wheel from the ZXR250C. While I generally prefer to sell wheels complete with cushdrive, I can remove the cushdrive rubbers and sell separately. Email me directly, at goodpartsnz@gmail.com
Cheers
Simon
January 22nd, 2012 at 3:07 pm
hey bud i looking for most of the plasctic two front sides headlight and surround glass and rubber for speedo also the iron peice that holds it all and bolt to the frame plus the plastic wheel arch some one was nice enough to back over it and not leave a note!!! on a zxr250 1993
January 22nd, 2012 at 9:46 pm
Hi Marshall,
thats bad luck to say the lest!
Sorry but I cant help a great deal with the ZXR250C parts. The only good plastics I have are the sidecover/tail sections. I do have a complete set of instruments and from memory the speedo is separate on that model, so would have a complete speedo available. Check around locally and see if your speedo can be repaired first as there are places that specialise in that type of repair. You can email me at goodpartsnz@gmail.com if you need any further details. Cheers Simon
January 26th, 2012 at 10:01 am
hey i am after all the front end fairings and front mud guard including clips and screws for a 1990 zzr 250.
thanks steven
January 26th, 2012 at 9:09 pm
Hi Steven,
sorry cant help with those. Fairings from these tend to sell quite quickly. Cheers Simon
February 5th, 2012 at 7:14 am
hi .got a 1994 zr 250 .need the rubbers that gobetween the carbs and the air box. can u help or is there a way round
February 5th, 2012 at 2:48 pm
Hi. I can supply a full set of inlet manifold rubbers at $60 plus postage. Email me at goodpartsnz@gmail.com if your interested. Cheers Simon
March 20th, 2012 at 11:00 am
im after a rear subframe for a ZX636(ZX6R) 2002 ninja
alternatively a ZZR 600 2005 Rear subframe will be perfect
would you happen to have such a peice
March 20th, 2012 at 10:24 pm
Hi Evan.
Sorry cant help with that one. I have a 2003 ZZR600 in stock, but they are different from the 05 model unfortunately. Cheers Simon
April 3rd, 2012 at 8:08 am
Hey im after the bracket/ assembly from a zxr250a which holds the side lower fairings together and the front u piece behind the front wheel in place.
Also where ru located I’m visiting nz this month and could pick it up.
Thx
May 3rd, 2012 at 7:35 pm
Hi there, Do you have a set of forks to fit a ’88 GPX 250?
Cheers,
Danny.
May 3rd, 2012 at 10:01 pm
Hi Danny. I have a pair available in tidy order. Chrome has some marks around where the lower triple clamp would sit, but beneath that where the seals would rub is clean with no pitting. $150/pair. You can email me at goodpartsnz@gmail.com and I can send photos. Cheers Simon
May 12th, 2012 at 6:27 pm
hi im trying to find an ignition with key(s) for a 02 zx9r…… cheers.
July 10th, 2012 at 2:05 pm
Hi I am looking for #3 plug lead and cap for 1993 ZXR250C
please let me know if you have any in stock and how much
Cheers Chris
July 27th, 2012 at 1:19 am
hi mate i see you have a 1998 zx9 there in the parts list. do you still have the sdi unit for it?
i have a zx9 1995 model but i think they still are the same still?
how much for it? and can you take some pics of the two plugs on the side
let me know soon as mate im hanging out to fix it
cheers danny
July 27th, 2012 at 7:09 pm
Hi Danny,
sorry the engine and electrics have now been sold. Cheers
Simon
August 29th, 2012 at 10:10 am
Hey there, do you have any front break and clutch levers to suite a 1990 Kawasaki ex500?
August 29th, 2012 at 9:54 pm
Hi Brent. I cant help with just the levers. You will find aftermarket levers quite cheap if thats all you require. I do have the complete clutch lever/clutch perch assembly from a 1997 ER500 at $40 if that suits. You can email me at goodpartsnz@gmail.com if your interested and I can email a photo. Cheers Simon
August 30th, 2012 at 1:24 pm
Heya im looking for a front mudguard with bracket for a kawasaki ninja ex250 1988
August 30th, 2012 at 10:14 pm
Hi Steven. Sorry cant help with that one currently. Cheers Simon
September 25th, 2012 at 6:34 pm
Hi there, after spark plug Leeds for a zxr250c 1996, are the Leeds on the a model the same?
September 25th, 2012 at 10:28 pm
Hi Callum.
The leads will be the same, but if its only leads you need, you are best to go to an automotive electrician or even Repco and buy a length of lead. They just screw in to the coil and plug caps. I can supply a pair of coils complete with leads and plug caps at $120. Cheers Simon
October 1st, 2012 at 9:58 pm
Hi I’m chasing a rear seat or cowling for 2000 zx9 E1, apparantly the C’s and E’s are the same .Cheers Matt
October 2nd, 2012 at 9:33 pm
Hi Matt. Sorry cant help with that one currently. Cheers Simon
November 13th, 2012 at 5:06 pm
Hey, I am looking for a set of clutch springs for a zzr 400 91
December 16th, 2012 at 6:53 pm
Hi,I’m after a tail light lens for a 2005 ZZR. do ya have anything close to fit
December 16th, 2012 at 9:50 pm
Hi.
Sorry all sold currently. Cheers Simon
February 12th, 2013 at 11:22 am
Hi im looking for a coil off a zr250 balius and also tacho with tacho drive cable wouldnt happen to have these would you cheers
February 12th, 2013 at 9:51 pm
Hi Hayden. I can supply a coil and a tacho, so email me directly at goodpartsnz@gmail.com and I can then send photos and further details. Cheers Simon
February 12th, 2013 at 9:04 pm
hey, can you give me a price for a top mounting handlebar for a zzr250
February 12th, 2013 at 10:13 pm
Hi Mel,
I can supply a left or right handlebar for the ZZR250 at $40 plus postage. email me at goodpartsnz@gmail.com for more details. Cheers Simon
February 12th, 2013 at 10:09 pm
zxr 250 engine only have all other parts cheers
February 12th, 2013 at 10:15 pm
Hi Andy. These engines are getting hard to come by now, but I have just got another ZXR250A in for dismantling. Approx 42k on the clock and engine runs very well. Email me at goodpartsnz@gmail.com and let me know if you are needing a bare engine (without carbs and starter) suitable for a transplant or complete with starter and carbs. Cheers Simon
May 1st, 2013 at 11:49 pm
Need to do an engine swap on a 1998
ZX9 . Do you have a complete engine
With low ks
May 2nd, 2013 at 9:29 am
Sorry I have sold the engine from the ZX9 that I dismantled.
May 8th, 2013 at 4:21 pm
Hi there, Im looking for a good cond. low kms 1989 ZXR 250a motor, or the topend in good condition.
Cheers,
Bryn
May 8th, 2013 at 11:05 pm
Hi Bryn,
I have recently purchased a damaged 1989 ZXR250A with approx 42000km on the clock and the engine runs well. The bare engine (without carbs and starter) suitable for a transplant, is available at $650 plus freight. If you would like more details please email me directly at goodpartsnz@gmail.com Cheers Simon
August 7th, 2013 at 9:11 pm
do you know if zxr250a sump fits up to a zxr250c engine?
August 7th, 2013 at 9:58 pm
Hi Jamie,
as far as I know they are the same. I can supply a ZXR250A sump with sump plug in good order at $50. You can contact me at goodpartsnz@gmail.com for further details. Cheers Simon
August 27th, 2013 at 9:20 pm
hi thre im looking for a ZXR250C left hand side engine cover..
August 27th, 2013 at 10:49 pm
Hi Chris,
I should have a stator cover in stock at $50. You can email me at goodpartsnz@gmail.com for more details if you are interested. Cheers Simon
September 14th, 2013 at 6:19 pm
Hi, im looking for a ignitor coil for a klx 300?
September 14th, 2013 at 8:07 pm
Hi Jeremy,
sorry cant help as i manily deal in road bikes. Cheers Simon
October 18th, 2013 at 4:45 pm
Do you have any parts that would fit a ’78 z650 please? Any parts at all.
October 18th, 2013 at 9:07 pm
Hi Yorkie, I think I may have a tail light but thats about all. Cheers Simon
November 9th, 2013 at 9:43 pm
Just wondering if u have Gpx250 fairing set with all bolts and tabs don’t need a tank tho .. Any color is fine
November 10th, 2013 at 8:52 pm
Hi Tane,
sorry cant help with fairings for the GPX250.
November 25th, 2013 at 1:47 pm
Hey there, looking for the right side of a gpx 250 handlebar. Any available?
November 25th, 2013 at 10:29 pm
Sorry Toby nothing in stock currently
January 13th, 2014 at 1:48 pm
Hi There,
I am in need of a tail section fairing for the zxr250c model 1992 would you be able to help out ? I need one in good nick no cracks etc also a rear seat and the air intake tubes that run to the tank .
Much Appreciated,Damian
January 13th, 2014 at 11:12 pm
Hi Damian,
I should ahve both sides toi the tail section bodywork in good order. You can email me directly at goodpartsnz@gmail.com for more details. Cheers Simon
January 14th, 2014 at 1:28 pm
Hi there, do you have a fuel pump that would fit a 94 Kawasaki ZX6R, even a ZX9 one would fit too I dare say…
Cheers.
Mark.
January 14th, 2014 at 9:23 pm
Hi Mark,
I have a fuel pump from a 94 ZX9R which will be the same. This is available at $100 and you cant contact me at goodpartsnz@gmail.com if you would like further details.
Cheers Simon
February 21st, 2014 at 4:03 pm
hi looking for 2x carburettor caps for zxr 750 1992 j model. they are the round type. carbs are about 38mm
March 20th, 2014 at 7:15 pm
hi I am in the market for a zzr 600e(ram air model) engine and carbs for a rolling frame I have and help or parts much appreciated
March 20th, 2014 at 9:11 pm
Hi Daniel,
sorry I have sold the engines from both ZZR600’s I have in stock. Cheers Simon
March 26th, 2014 at 8:26 pm
Hi
Do you have any KDX200 1989 complete engines and if so how much?
March 26th, 2014 at 9:35 pm
Hi Quentin,
sorry nothing in stock. Cheers Simon
May 2nd, 2014 at 1:45 pm
Hi, I’m looking for a speedo cable for a Kawasaki ZZR250.
Thanks,
Christian
May 2nd, 2014 at 8:06 pm
Hi Christian,
I can supply a speedo cable at $20 plus postage. email me at goodpartsnz@gmail.com for more details. Cheers Simon
May 28th, 2014 at 11:37 pm
hi i am looking for Kawasaki ZXR250C Side belly fairings and front fairing, also inner fairing panels? also if you have ay tank air intake snorkels?
cheers,
Rose.
May 29th, 2014 at 9:52 pm
Hi. Good timing as I have just purchased a 1993 ZXR250C. Please email me directly at goodpartsnz@gmail.com and I will check out the parts you require and get photos. Cheers Simon
June 16th, 2014 at 6:59 pm
Hi.
I have a mate’s 1992 zzr250.it’s in need of a lhs lower cowling,front fender,lh indicator in the fairing,lh mirror assembly.The bike is a dark blue from factory.Any help would be greatly appreciated.
Cheers Craig Johnston.
June 16th, 2014 at 9:53 pm
Hi Craig,I will have a LH fairing panel, front mudguard, LH mirror and possibly a LH front indictor, but all would require repainting as none are from the factory blue model. You can contact me directly at goodpartsnz@gmail.com if you would like further details. Cheers Simon
August 1st, 2014 at 7:01 pm
Hi there, just wondering if you had a rhs front fairing for a 91 zxr250c at all? Also chasing a pair of the air ducts that go to the tank. Any help would be awesome thanks heaps 🙂
Troy
August 1st, 2014 at 8:54 pm
Hi Troy. yes I can supply a RH fairing panel for the ZXR250C. If you email me directly at goodpartsnz@gmail.com I can email more details. Cheers Simon
September 23rd, 2014 at 8:20 pm
hiya, replacement speedo cable for 93 zzr250
September 23rd, 2014 at 9:25 pm
Hi Joel,
I have another ZZR250 coming in later this week. email me at goodpartsnz@gmail.com and I will reply as soon as the bike comes in. Cheers Simon
September 24th, 2014 at 1:25 pm
Hi there, I was wondering if you had any of the following parts available from a 1992 ZR250 Balius?
-Front Left hand indicator
– Speedometer instrument cluster
– left hand side engine casing
– Clutch lever
Cheers,
Chris
September 24th, 2014 at 10:30 pm
Hi Chris,
depending on which model Balius you have, I may be able to help with the instrument cluster and I should also have the engine stator cover although it does have some gravel rash. If you can email me at goodpartsnz@gmail.com I can then email photos and provide more details. Cheers Simon
September 29th, 2014 at 5:00 pm
Hi, do you have a brake master cylinder or stator for a Kawasaki ZXR250C? Cheers
September 29th, 2014 at 9:19 pm
Hi Campbell. I have a front brake master cylinder from the ZXR250C including brake lever and brake switch in very tidy order at $140. I have a stator coil assembly from the ZXR250A model which should be the same as the C at $150. You can email me directly at goodpartsnz@gmail.com for more details. Cheers Simon
October 14th, 2014 at 8:17 am
Hi,
Do you have a rear light\lens and front indicators for a 1993 zzr250
Thanks
October 14th, 2014 at 9:48 pm
Hi Craig, yes I have front fairing mounted indicators at $35 each and a complete tail light assembly at $50. You can email me at goodpartsnz@gmail.com Cheers Simon
November 10th, 2014 at 1:20 am
hello – do you have an igniter 21119-1531?
November 10th, 2014 at 6:33 pm
Hi Dan,
what model is the CDI for. You can email me directly at goodpartsnz@gmail.com Cheers Simon
November 10th, 2014 at 6:34 pm
Hi I have a zr250 balius in need of some dropped repairs.
In need of
– rear rim (not tyre)
– left and right wing mirrors
-indicators
-headlight (and brackets if possible)
-front brake lever
-gear lever
-gauges (if possible)
-left/right plastic body panel (below the seat and tank, small pieces no larger then around 30cm)
Thanks 🙂
Travtractor@yahoo.co.nz
November 10th, 2014 at 6:46 pm
Hi Travis,
I can certainly help with some of those parts and will email you directly. Cheers Simon
January 13th, 2015 at 5:36 pm
Do you have the left hand mirror for a zxr 250 1991?
January 13th, 2015 at 10:18 pm
Hi Matt, I should have a couple of LH mirrors in stock although they are in green (you can repaint them easily enough). If you email me directly at goodpartsnz@gmail.com I will email photos of what I have available. Cheres Simon
January 25th, 2015 at 12:21 pm
Hi I’m looking for a front left fairing for a 2012 250 ninja?
January 25th, 2015 at 7:38 pm
Sorry cant help with that one. Cheers Simon
March 2nd, 2015 at 4:07 pm
Hi do you have a front guard to a 1988 Kawasaki Ninja GPX250R and a fuel tank?
March 2nd, 2015 at 6:39 pm
Hi Mike,
sorry cant help with those. I sold a tank and front guard a couple of weeks back and they were the only ones I had in stock. Cheers
March 30th, 2015 at 10:41 am
Looking 4 a fuel tank and a front mudguard 4 a kawasaki gpx 750 cc 1986 price and availability thanks
March 30th, 2015 at 4:11 pm
Sorry cant help with those Chris. I have dismantled a GPX750 but the tank and front guard were badly damaged.
June 14th, 2015 at 10:19 pm
hi i am looking for gpz500,ex500 electrical items can you help with it, i think er500 will be suitable thanks
June 14th, 2015 at 10:22 pm
Hi. I have most electrical components from a 1992 GPZ500. If you email me directly at goodpartsnz@gmail.com and let me know what parts you require, I can then provide further details. Cheers
July 1st, 2015 at 4:59 pm
Hello
I have a 1990 ZXR250 and I am looking to purchase an aftermarket exhaust.
Do you have anything that would fit?
Regards
Ben Savage.
July 1st, 2015 at 7:52 pm
Sorry Ben no aftermarket mufflers or exhausts in stock.
July 5th, 2015 at 6:38 pm
Hey was just wondering if yous had a front fairing and windscreen for a 1987 gpx250?
July 12th, 2015 at 10:45 pm
Hi, Looking for a fairing for a 2001 GPX250, do you have anything suitable?, Thanks
July 13th, 2015 at 10:37 am
Sorry nothing suitable in stock currently. Cheers Simon
October 1st, 2015 at 10:41 am
Hi I am after a set of front disc’s for a 1989 GPZ 50
October 1st, 2015 at 4:57 pm
Sorry nothing in stock currently Marco. Cheers
October 22nd, 2015 at 7:02 pm
Hey, I have a 1990 zzr250 and im looking for a dash, a front brake disc and a front brake light switch? Do you have any of these? If so how much?
October 22nd, 2015 at 8:07 pm
Hi. I can supply a dash in good tidy order (missing the odo reset knob) at $100 and also a front brake disc in good order at $120. Not sure on the brake switch but these are available new. You can email me directly at goodpartsnz@gmail.com if you would like further details. Cheers
October 30th, 2015 at 2:57 pm
Hi I’m looking for mirrors, screen and green upper fairing. For a 1988 Kawasaki zxr 250 a. Many thanks Matt
October 31st, 2015 at 8:14 pm
Hi Matt, dont think I can help currently. I have an upper fairing but it will need some plastic welding repairs. As for mirrors, I dont think I have a pair in tidy order but will have a look next week and will email you directly if I have anything suitable. Cheers
November 7th, 2015 at 9:09 pm
Hi I’ve got a 1985 gpz400, would you have a motor that would bolt in, maybe the gpz750?
November 8th, 2015 at 8:45 am
Hi Leighton,
Cant help with anything suitable currently. Not exactly sure what would fit straight in your GPZ400 but pretty sure a GPZ600 engine would be the same. The ZZR400 and 600 are identical bikes for example. The GPX600 may also be suitable. If you do change engines, you will also need to fit the correct carbs and change the CDI. Cheers Simon
November 10th, 2015 at 8:31 pm
Hi their ,do u happen to have wheels to fit a 1990 zxr 400 ?
November 11th, 2015 at 8:02 am
Hi Dean,
I have a 450×17 rear wheel from the ZXR400 but have sold the front wheel. If you email me directly at goodpartsnz@gmail.com I can provide more details including a photo. Cheers Simon
December 15th, 2015 at 1:15 pm
Hi there. Im looking for parts for a 1987 kawasaki GPX 250.
-right hand side bar and throttle assembly
-right hand side muffler
-right hand side muffler hanger (that the pillion peg is part of)
December 15th, 2015 at 1:24 pm
Hi there, i am after parts for a 1987 GPX 250
-right hand side bar and throttle assembly
-right hand side muffler
-right hand side muffler mount (which the pillion peg is part of)
regards Dayner.
December 15th, 2015 at 2:51 pm
Hi Dayner,
I don’t think I have a RH handle bar, but I have the RH switch block complete with throttle gripe etc , a RH pillion footpeg hanger and I also have a RH muffler with only light scratches along its length. If you email me directly, at goodpartsnz@gmail.com I can provide photos and additional details. Cheers Simon
December 15th, 2015 at 9:44 pm
Hey bud lookin for heaps of part for my zzr400 have u got motors to wat have u got
December 15th, 2015 at 9:44 pm
Hey bud lookin for heaps of part for my zzr400 have u got motors to wat have u got thanks
December 16th, 2015 at 7:54 am
Hi Aaron,
I have dismantled a couple of these but many parts are sold. Best option is for you to email me directly at goodpartsnz@gmail.com and give me a list of parts you may be interested in. I will then email photos and details of individual parts if I have them in stock. I do have a ZZR400 engine in stock although some exterior parts have been removed. Cheers Simon
January 7th, 2016 at 4:02 pm
Hi asked question on TM regarding coils and cdi for gpx 400 can you email me pics and prices plz. Mark.
January 7th, 2016 at 6:15 pm
Hi Mark,
will email you directly this evening.
January 9th, 2016 at 4:46 am
Chasing after a KR1 250 1988 model stator. Can you help me out?? Thanks Scotty
January 9th, 2016 at 8:26 pm
Sorry Scotty cant help with that one. Cheers Simon
January 10th, 2016 at 1:43 am
Anyone have a kr1 1988 stator they would sell. Please contact me, I bought this bike 6 months ago and only riden it 3 times. Thanks Scotty
January 10th, 2016 at 9:02 pm
Hi I’m after a fuel pump for a 1992 ZXR400 L2 model, also if you have a temperature gauge from the dash cluster of same model? Thanks
January 10th, 2016 at 10:11 pm
Hi Leighton, I have sold the fuel pump from my ZXR400 but have one from a ZXR750 at $100 which looks to be identical. If you are interested please email me directly at goodpartsnz@gmail.com Sorry no temp gauge
January 14th, 2016 at 6:54 pm
after a 1994 zzr 250 front rotor thanks
January 14th, 2016 at 9:15 pm
Hi. I can supply a front disc in good order for the ZZR250 at $120. If you would like further details please email me directly at goodpartsnz@gmail.com Cheers Simon
January 16th, 2016 at 11:42 am
Hi I’m looking for a far left carburetor for a 1992 ZX2R or a full carburetor set if I can’t get single
January 16th, 2016 at 12:11 pm
Hi Dameon. Can you check the model again as I think you have made a typo error. You can email me directly at goodpartsnz@gmail.com Cheers Simon
February 15th, 2016 at 8:14 pm
Hi. I am chasing a 93 ZZR1100D chain guide/chain slider.
Can you help?
February 16th, 2016 at 8:39 am
Sorry cant help with that one. Cheers
March 14th, 2016 at 6:35 pm
Hi there, do you have a clutch cable for the 87 gpx 250? Am after one asap
March 14th, 2016 at 7:01 pm
Yes I can supply a clutch cable at $25 plus postage. Email me directly at goodpartsnz@gmail.com Cheers
March 31st, 2016 at 11:04 am
Hi I’m looking for a muffler/exhaust for a 1990 zxr750 any chance use have one that will fit…? Thanks 🙂
March 31st, 2016 at 12:23 pm
Sorry Dean, cant help with that one. Cheers Simon
April 26th, 2016 at 7:49 pm
Hey looking for a 1988 Kawasaki gpx 250 carb with intake manifolds included
April 26th, 2016 at 8:17 pm
Sorry Jake, all sold currently. Cheers Simon
May 9th, 2016 at 1:25 am
hey mate, Do you have a good condition gpx250 rhs muffler from the 87 gpx in metal finish? thanks
May 9th, 2016 at 9:36 am
Hi Dayner. I have a RH factory muffler, but it has a light scrape along its full length. If you email me at goodpartsnz@gmail.com I can send some photos. Cheers Simon
June 25th, 2016 at 12:04 am
Hi im looking for an airbox from a 1987 Kawasaki gpx 400 .If you have one how much includingpostage to England
June 25th, 2016 at 10:08 am
Sorry cant help with an airbox Denis. I have dismantled a GPX400 but it had pod airfilters fitted. Cheers Simon
July 19th, 2016 at 1:47 pm
hi there looking for a kxf 450 07/08 swing arm
thanks Sam
July 19th, 2016 at 1:51 pm
Sorry cant help with that one Sam. I mainly deal in road model parts. Cheers Simon
August 5th, 2016 at 6:14 pm
Hi looking for a middle half fairing panel right side for a 2001 zx9r green if possible please let me know cheers
August 6th, 2016 at 10:43 am
Sorry cant help with that one John.
August 19th, 2016 at 10:48 am
Hi there have you got a clutch cable for a 1987 gpz500?
August 19th, 2016 at 9:23 pm
Hi. I have a clutch cable from the later ER500 model which should be the same. If you email me directly at goodpartsnz@gmail.com I can send a photo. Cheers
September 10th, 2016 at 10:07 pm
Hi,good evening.
I’m enquiring carbs and air boxes for model of Kawasaki ZZR 250 1990.
Thanks.
September 11th, 2016 at 9:15 am
Hi Kamal. I have some in stock and will email you directly. Cheers Simon
December 10th, 2016 at 7:54 pm
Hi Im Looking For An Exhiast System For A Zzr 250 , Or One For A Gpx 250 (zzr Prefered)
December 10th, 2016 at 10:11 pm
Hi. Sorry I dont think I can help with a full exhaust system for the ZZR or GPX250. I will have headers, but the only muffler I have will have dents and scrapes and would need a new outer skin placed over the muffler to be tidy. Cheers Simon
January 15th, 2017 at 6:45 pm
Hello, do you have a stator and/or regulator/rectifier for a 2010 Kawasaki ZX6R?
January 15th, 2017 at 7:02 pm
Sorry cant help with that one. Cheers Simon
January 15th, 2017 at 6:45 pm
Hi, do you have a stator and/or regulator/rectifier for a 2010 Kawasaki ZX6R?
January 15th, 2017 at 7:02 pm
Sorry no.
January 16th, 2017 at 10:27 am
Hi, Do you have a fork for an 2005 zxr6r (636). I only need the outer leg. Cheers
January 16th, 2017 at 12:47 pm
Hi Phil. Dont think I can help with that one. I have a 1995 ZX6R awaiting dismantling but would only be willing to sell the pair of forks complete. If you dont have any luck finding a single fork casing, you can email me regarding a pair, at goodpartsnz@gmail.com. Cheers Simon
May 30th, 2017 at 9:20 pm
Hi there im after a ignition and key, taillight ,right mirror and speedo cable for 1990 zzr250
May 31st, 2017 at 6:33 pm
Hi. I will have a LH mirror, speedo cable and also a tail light. Not sure on the ignition switch but can check tomorrow for you. If you can email me directly, at goodpartsnz@gmail.com I can send photos for you to view. Cheers Simon
June 13th, 2017 at 12:22 am
I’m looking for a left hand mirror if a 1984 gtr1000 Kawasaki
June 13th, 2017 at 9:20 pm
Hi Joe.
I have a GTR1000 in stock and the LH mirror is available at $50. If you email me at goodpartsnz@gmail.com I will send photos of further details. Cheers Simon
June 15th, 2017 at 5:03 am
Looking for front indicator for kr1 can u help
June 15th, 2017 at 12:07 pm
Hi Steve. I think I may have one in stock although it has a light graze. If you can email me at goodpartsnz@gmail.com I will check what I have in stock and can then send you a photo. Cheers Simon
August 29th, 2017 at 10:40 pm
Hi, what GPZ 305 parts do you have available?
I’m am looking for carburettors – start button – drive belt- engine parts – instruments and other any other parts.
Thanks
August 30th, 2017 at 9:49 am
Hi Richard. Thanks for your enquiry. Not many parts for these models about, but you are in luck as I have a 1984 EX250C that has been fitted with the 305 engine. If you can email me directly at goodpartsnz@gmail.com I can send photos and we can discuss specific parts, including a complete (running) engine etc. Cheers Simon
September 14th, 2017 at 2:05 pm
Hi there. I am looking for the front fender that sits over the tyre on a zzr1100 or one that will for that bike. I hope you can help
Kindest regards
Jack
September 14th, 2017 at 3:30 pm
Sorry cant help with that one Jack. Cheers Simon
September 17th, 2017 at 10:10 am
Hi, I am restoring a Kawasaki KR1 and was wondering what parts you may have available? Regards Robert Weir Christchurch 021 2396052
September 17th, 2017 at 7:52 pm
Hi Robert.
Unfortunately I have very few parts for the KR1 and they are becoming hard to find. I have a pair of carbs, choke cable, rear shock linkage, throttle cables, coolant bottle, power valve motor and a CDI.
If you are interested in any of these, please email me at goodpartsnz@gmail.com and I can send photos. Cheers Simon
October 15th, 2017 at 9:49 pm
Looking for a 1993/zzr 1100 front fender
October 16th, 2017 at 7:25 pm
Sorry all sold. Cheers
October 17th, 2017 at 8:24 am
Hi Kevin,
I am looking for parts for a Kawasaki KR-1 your web site currently shows you have one in stock.
I require the fairing mounting brackets (adjacent the bottom of the tank) and the rugger swing arm guard.
Kind Regards Robert Christchurch
October 17th, 2017 at 8:17 pm
Hi Robert. Unfortunately most of my KR1 parts have sold and I only have a handful of parts remaining, so cant help with the parts you are looking for. Cheers Simon
October 23rd, 2017 at 8:29 am
Hi. What’s the cost of the GPZ500 total wire loom .is the ER500 the same part? Thanks Bruce. I’m based in Dunedin.
October 24th, 2017 at 10:08 am
Hi Bruce. Sorry cant help with a loom as mine have all sold. Not sure if the GPZ loom is the same as the ER model but it would pay to check carefully as things like the CDI plug may well be different. Cheers Simon
November 11th, 2017 at 11:29 pm
Looking for windshield for Kawasaki GPZ250 1987 and middle piece that goes over top of the gas tank. Thanks
November 13th, 2017 at 8:14 am
Sorry cant help with those Connor.
January 2nd, 2018 at 4:33 pm
hi. after front slaves and master cylinder for a 91 zzr1100 (c?)
January 2nd, 2018 at 5:06 pm
Hi John. Thanks for your enquiry. I have a front brake master cylinder and both front brake calipers from a ZZR1100D, which I think are the same as the earlier C model. If you email me at goodpartsnz@gmail.com I can send you photos to compare. Cheers Simon
January 26th, 2018 at 3:48 pm
After ZRX Kawasaki bare rear wheel 5.5in ZX 9 possibly the same x2
And 1 front wheel aswell less disc’s
January 26th, 2018 at 7:15 pm
Hi Pete. Not a great deal in stock to chose from currently, but I do have a 550×17 rear wheel from a 1998 ZX6R and also a 350×17 front wheel from a 1995 ZX6R. If you email me at goodpartsnz@gmail.com I can send photos and check axle sizes etc if that helps. Cheers Simon
June 6th, 2018 at 6:35 pm
Hi,
Do you have a double bubble visor in black for a 2005 kawasaki zx10r?
Cheers,
Bob
June 7th, 2018 at 7:32 pm
Sorry cant help with that one.
July 8th, 2018 at 9:47 pm
I am after a zx10r engine & transmission to mount in a beach buggy. Other models i would be interested are GSX-R750 (2006-present), or zx6r(1997-present).
What have you got?
July 9th, 2018 at 9:07 am
Hi William. I have a 2006 Kawasaki ZX10R that is being dismantled later this week and have the complete engine/electrics package available at $3,000. Please email me at goodpartsnz@gmail.com if you would like further details. Cheers Simon
July 17th, 2018 at 1:06 pm
Hi guys I was after a airbox and filter system for a 1985 Kawasaki vn700 would you have by any chance
July 17th, 2018 at 1:35 pm
Sorry cant help with that one Mike. Cheers Simon
July 28th, 2018 at 12:00 am
Looking for both front indicators for zr250 balius
Thanks Peter
July 28th, 2018 at 11:12 am
Sorry cant help with those Peter. Cheers
November 5th, 2018 at 2:16 pm
Hey was wondering if you had the R/H Side mirror (or a pair if you prefer to sell as a pair). The pair of front indicators and the space pipes? on a ZXR250C 91, Cheers.
November 5th, 2018 at 6:09 pm
Hi. I can supply a LH mirror at $30 plus postage. I think the ZXR250A mirrors are the same, so I may have one in the colour you require, but otherwise assume it will need painting. If you email me at goodpartsnz@gmail.com I can supply further details including photos. Sorry cant help with front indicators.
February 16th, 2019 at 10:19 pm
Hi I’m After a carb diaphragm for a zzr 250 1992
February 17th, 2019 at 6:34 pm
Sorry no carbs in stock currently.
March 1st, 2019 at 12:32 pm
Hi, I need a right side footpeg for my 1995 Kawasaki Vulcan 1500a, any luck?
March 2nd, 2019 at 9:37 am
Sorry nothing in stock for that model currently.
March 7th, 2019 at 9:05 pm
Hi do you have a left rear hanger for passenger footpeg my bike is a 96. Could i have a price too thanks
March 8th, 2019 at 10:11 am
Have replied to your email. Cheers
March 29th, 2019 at 11:07 am
Hi just wondering if you’d have a cdi for a 2001 zx6r
March 29th, 2019 at 5:30 pm
Sorry Brad, I should have one from a 1999 ZX6R, but they are likely to be different. If you email me at goodpartsnz@gmail.com I can send you a photo if I have one in stock. Cheers Simon
June 2nd, 2019 at 5:46 am
Hi, Would you have a tachometer for a 2000 Kawasaki ZR 750 ?
June 2nd, 2019 at 10:11 am
Sorry cant help with that one.
June 2nd, 2019 at 9:32 am
Hello. I wuld like to know if u have a exhaust/headers for my 1997 zx6r kawasaki ninga.
June 2nd, 2019 at 10:19 am
Hi. Nothing in stock from the ZX6RF model (1995-1997). I do have a 1999 G model in stock which has an aftermarket exhaust system, but I’m unsure if this will fit your earlier model. You can email me directly, at goodpartsnz@gmail.com if you’d like further details. Cheers Simon
June 13th, 2019 at 10:33 pm
Hey looking for a Kawasaki balius zr250 fuel tank and handlebars
June 13th, 2019 at 11:20 pm
Sorry all sold.
November 26th, 2019 at 3:59 pm
hi after another zzr1100 D engine
November 26th, 2019 at 5:40 pm
Sorry all sold. I have some parts such as barrels, head etc, but no gearbox parts or bottom ends.
December 19th, 2019 at 8:03 pm
Kawasaki gpx250 1987 RH Handlebar?
December 19th, 2019 at 9:45 pm
Sorry all sold.
March 5th, 2020 at 10:23 pm
Hi do you have an engine to fit a 1985 Kawasaki gpz 600, cheers
March 6th, 2020 at 8:11 am
Hi Dom. I have a 1988 GPX600 engine in stock, but I’m unsure what if any differences there are between the GPX and GPZ600 engines. If you email me at goodpartsnz@gmail.com I can provide details including photos. Cheers Simon
May 9th, 2020 at 1:50 pm
Need rh side/ kill switch for Kawasaki gpx 400
May 9th, 2020 at 3:07 pm
Hi. I have a RH switch block complete with throttle tube from a GPX400 in very tidy order at $50 plus postage. If you are interested, please email me at goodpartsnz@gmail.com and I will reply with further details including a photo. Cheers
July 17th, 2020 at 1:49 pm
Hi just wondering if you guys have a complete left have a left hand switch cluster for a 1990 kawasaki gpx 250 and the petrol tank mounting brackets. Cheers
July 17th, 2020 at 6:07 pm
Hi Bradley. I will have a LH switch block in stock at $45 plus postage and should have a fuel tank bracket. If you email me at goodpartsnz@gmail.com I will reply with photos, so we can make sure the parts are the ones you need. Cheers Simon
July 19th, 2020 at 4:30 pm
Hi, Do you have two ZX6R or ZX9R Carburetors?
July 20th, 2020 at 10:24 am
Sorry no carbs from those models in stock.
August 14th, 2020 at 10:22 pm
Hi, do you have a pair of retaining springs/clips for front brake pads on the zx9r/6r? cheers
August 15th, 2020 at 10:48 am
Sorry cant help with those.
September 9th, 2020 at 12:35 pm
Hi I am looking for mikuni gpz750 carb body to replace oma busted one I have
September 9th, 2020 at 11:12 pm
Sorry I cant help with that one.
September 12th, 2020 at 9:56 pm
Hi
Chasing a fuel tank and sender for a 1991
Zzr1100 c
Can you help ?
September 13th, 2020 at 7:39 pm
Sorry cant help with that one.
October 5th, 2020 at 6:44 pm
Hey I’m just looking for a zxr c 250 or 400 left hand fairing
October 6th, 2020 at 9:10 am
Hi Connor. I can supply a ZXR250C LH fairing panel at $50 plus shipping. If you email me at goodpartsnz@gmail.com I can then send you details including photos. Cheers Simon
November 15th, 2020 at 8:51 pm
Hi
I am just wondering if you could please help me?
Do you have an motor for a Kawasaki ZR balius 250cc 1993
Or anything else that would fit it?
Kind regards
M.A.D
November 16th, 2020 at 8:20 am
Hi. I have a 1990 Kawasaki Balius in stock. If you email me directly at goodpartsnz@gmail.com I can provide further details. Cheers Simon
December 9th, 2020 at 11:28 pm
hi i am looking for gpz 400 wiring harness
December 10th, 2020 at 8:28 am
Sorry I cant help with that one.
December 22nd, 2020 at 9:45 am
set of carbs for a GPZ1000RX?
December 22nd, 2020 at 10:10 am
Sorry no.
January 11th, 2021 at 1:38 pm
Hi there do you have a Visor for the fearing for a 1990 zzr600 kawasaki thanks
January 11th, 2021 at 6:03 pm
Sorry all sold.
January 13th, 2021 at 2:51 pm
Hey there,
Do you have a set of front indicators for a Kawasaki ZZR 1100 C model? Thanks 🙂
January 29th, 2021 at 6:59 pm
Hi do you have the radiator fan for a 2011 Kawasaki Versys 650 ABS. I’ve been told the same year Ninja 650 fan also fits
January 29th, 2021 at 7:25 pm
Hi Wayne.
I have a radiator fan assembly from a 2011 EX650R in stock at $40 plus postage. If you email me at goodpartsnz@gmail.com I can reply with photos. I wont be able to supply the fan until after Feb 8th. Cheers Simon
February 8th, 2021 at 12:58 pm
Hi there I’m after a left handlebar mount for a 87 gpx250r
February 8th, 2021 at 6:26 pm
Sorry I cant help with that one.
February 19th, 2021 at 12:17 am
Hey mate looking for a right foot peg and bracket and right side black plastic and indercator for 2012 ninja
February 21st, 2021 at 1:55 pm
Sorry I cant help with those.
March 1st, 2021 at 8:38 pm
Hi im looking for a carburetor for a 1988 zx10
March 2nd, 2021 at 5:32 pm
Sorry sold.
March 3rd, 2021 at 11:46 pm
Im looking for a foot peg and bracket for a 2008 Kawasaki ninja 250j preferably the gear stick side
March 4th, 2021 at 10:07 am
Hi Roman. I can supply a LH footpeg hanger and footpeg from a Kawasaki EX250J in very good order at $100/pair plus postage. If you are interested, please email me at goodpartsnz@gmail.com and I can provide further details including photos. Cheers
March 11th, 2021 at 8:15 pm
After an ignition key/barrel if you’ve got one kicking about for a gpz750
March 12th, 2021 at 8:56 am
Hi Aran. I may have an ignition switch with key to suit. If you email me at goodpartsnz@gmail.com and let me know what year the bike is, I will reply ASAP. Cheers Simon
March 18th, 2021 at 4:12 pm
Hey guys, chasing a gen1 z1000 right side footpeg bracket?
March 18th, 2021 at 8:47 pm
Sorry I cant help with that one.
March 18th, 2021 at 6:33 pm
I need a small cheap enginer for a school project dirt trike under $80-100 with a egnition start with gears? 50cc above Do you guys have any
March 18th, 2021 at 8:48 pm
Sorry i cant help with that one.
March 28th, 2021 at 7:32 pm
Hi do you have a fuel tank and fairings for a 2007 kawasaki gpx250?
March 29th, 2021 at 9:00 am
Sorry no fairings in stock. I will have a fuel tank but it will have dents that need repairing.
April 23rd, 2021 at 10:22 am
I’m after good condition spark plug cap seals for a ZZR400, to fit cap part number X05FN.
Do you have any?
April 23rd, 2021 at 8:24 pm
Hi. I have coils complete with leads and the factory plug caps, but Im not sure they have that part number. They are definitely factory leads and caps, so if you email me at goodpartsnz@gmail.com I can get back to you with some photos. Cheers
April 27th, 2021 at 9:20 pm
Do you have a radiator for a 94 ZX9R and or clocks(3). thanks Paul here
April 28th, 2021 at 10:00 am
Hi Paul. I have a complete dash assembly in very good order and also a radiator. The radiator looks like it had a small leak around where one of the outlets meets
April 28th, 2021 at 10:02 am
Sorry Paul. The radiator looks like it had a weep around the base of one of the two outlet/inlet pipes, but should be easily soldered. One lower corner mount is damaged but still usable. Core looks to be ok. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
May 17th, 2021 at 7:25 pm
Hey mate looking for a ex250 windscreen cheers
May 18th, 2021 at 9:41 pm
Hi Kris,
I have a factory screen in tidy order from an EX250J in stock at $40 plus shipping. If you email me at goodpartsnz@gmail.com I can provide details including a photo. Cheers Simon
May 17th, 2021 at 9:14 pm
I have a1989 gpx 750 with an American headlight so can’t get a wof in Nz. Any idea where I can get a left of the road one. No it can’t be turned upside down. Cheers
May 18th, 2021 at 9:49 am
Hi David. I had to chuckle at your comment about turning the headlight upside down, but no doubt someone would suggest it 🙂 I can supply the correct headlight for the GPX750 at $120 plus shipping. If you can email me at goodpartsnz@gmail.com I can then reply with the details. Cheers Simon
June 17th, 2021 at 12:43 am
Have u hot brake light for 1991 zzr 250
June 17th, 2021 at 9:18 am
Hi Dylan. I can supply a tail light for the ZZR250 at $45 plus postage. If you email me at goodpartsnz@gmail.com I can reply with details including a photo. Cheers Simon.
June 30th, 2021 at 2:08 am
Do you have a pack rack frame for a 07 gpx250?
June 30th, 2021 at 9:44 am
Sorry I cant help with that one. Cheers
July 16th, 2021 at 1:38 am
Hi after a alternator chain tensioner for a kawa750 H1 or H2 zxr or mayb later ( not the blade ) thanks price and photo please
July 16th, 2021 at 11:03 am
Sorry I cant help with that one.
August 18th, 2021 at 1:52 pm
Hi I’m looking for parts for my 2007 gpx 250, not sure exactly what I need yet but from memory exhaust pipes and cans, both front indicators, some plastics (not sure which ones have broken mounts), front forks and possibly some other bits
Cheers,
Chris
August 18th, 2021 at 6:30 pm
Hi Chris. I do have parts in stock from the later model GPX250. I should have mufflers in tidy order and also possibly good forks. If you email me at goodpartsnz@gmail.com once you know what parts you need, and I can then reply with details including photos, if I have anything suitable in stock. Cheers Simon
August 23rd, 2021 at 1:00 am
Hi would u have the alternater chain tensioner and guide/ blade slipper for the zxr 750 I think I said the gpx 759engines gone?
August 23rd, 2021 at 11:12 am
Sorry no.
August 31st, 2021 at 2:49 am
hi do you have any running ninja 250 motors?
August 31st, 2021 at 9:54 am
Hi Jacob. I may be able to help, but need a few more details. If you can email me at goodpartsnz@gmail.com and let me know the year and model (GPX, EX or ZZR250) and also if you are wanting a bare engine (without starter and carbs) suitable for a transplant, or if you need other components as well as the bare engine. Cheers Simon
August 31st, 2021 at 6:45 pm
Hiya i am looking for a Kawasaki zzr250 1995 Solenoid
August 31st, 2021 at 7:06 pm
Hi Joe. I can supply a solenoid at $25 plus postage, If you email me at goodpartsnz@gmail.com I can supply details. Cheers Simon
September 16th, 2021 at 5:58 pm
Sorry I didn’t answer you, managed to figure out it was a wiring issue.
September 2nd, 2021 at 9:12 pm
Hi, looking for an OEM fuel pump for zx10 B Kawasaki (runner with no leaks)?
Cheers, Andy
September 3rd, 2021 at 10:02 am
Hi Andy. I have a factory fuel pump from a 1990 Zx10 which looks to be in good order. The bike had been sitting for some time when I got it and I didn’t not have it running, but there are no signs of fuel leakage from the pump. This is available at $100 including postage and if you would like further details including a photo, please email me at goodpartsnz@gmail.com
September 16th, 2021 at 5:55 pm
Hiya , was looking for a carbuerator for a 1995 kawasaki zzr250. Thanks, Joe
October 18th, 2021 at 10:45 am
Hi I am looking for a fuel tank for Kawasaki ZX10r 2006 and the Air Ram Duct
October 18th, 2021 at 5:33 pm
Hi Mike. I cant help with a fuel tank, but OI do have a pair of rubber air duct intakes from a 2006 ZX10R. If you email me at goodpartsnz@gmail.com I can then reply with a photo to see if they are what you require. Cheers
October 24th, 2021 at 8:14 pm
Hi, after kawasaki gpz750 exhaust.
October 25th, 2021 at 8:28 am
Sorry I cant help with that one.
October 25th, 2021 at 5:57 pm
Hi. Have you got four brake caliper mount bolts to fit zxr400.. Id magine most 90sbikes mite be the same. Thanks
October 25th, 2021 at 7:20 pm
Sorry I cant help with those.
December 6th, 2021 at 8:23 pm
Hi Simon: I have a 2010 Kawasaki EX650. Do you have a centre stand that will fit my bike. A bit of a long shot but worth a try. Cheers Frank
December 7th, 2021 at 8:48 pm
Sorry no.
January 30th, 2022 at 11:23 pm
Hi looking for front brake calipers for a 2005 z750
January 31st, 2022 at 8:36 am
Hi. I have a pair of front brake calipers from a 2004 Z750 and these should be the same as your 2005 model. if you email me at goodpartsnz@gmail.com I can then reply with details including photos. Cheers.
February 28th, 2022 at 1:14 pm
Hello!
Im looking for both front indicators for a Kawasaki GPX 250 Ninja
February 28th, 2022 at 6:17 pm
Sorry I cant help with those.
February 28th, 2022 at 8:44 pm
Hi there, looking for a set (L&R) of rear indicators for a 2006 Kawasaki Er 650a? Thanks 🙂
March 1st, 2022 at 8:18 am
Sorry I cant help with those.
February 28th, 2022 at 11:07 pm
Hi have you any handlebars for 2007 zx10R?
March 1st, 2022 at 8:20 am
Sorry No.
March 13th, 2022 at 1:22 pm
Hi after both front indicators and right rear indicator for GPX 250 2007. Can you help? Thanks
March 13th, 2022 at 10:40 pm
Hi have you got a 2006/7 zx10R top yoke (triple clamp) and steering damper available? Or something that will fit?
March 14th, 2022 at 8:04 pm
Sorry no.
March 13th, 2022 at 10:44 pm
Ninja zxr 250 , 1991
After air box seals and right rear turn signal cover. How much? Do you have a donor bike ? How much for donor bike ?
March 14th, 2022 at 8:06 pm
Sorry I cant help with those.
March 19th, 2022 at 9:19 pm
Hi, do you have gear indicator that would work with my 2012 Ninja 250?
March 21st, 2022 at 7:16 pm
Sorry no
March 22nd, 2022 at 9:06 pm
Hi, I’m looking for parts for a Kawasaki ZXR250A 1989. Specifically the fairings, but interested in other parts also.
March 23rd, 2022 at 8:39 am
Hi Ian. I do have parts in stock from several ZXR250A models, although not many fairing panels remaining, and no upper front (nose cone) fairings. If you email me at goodpartsnz@gmail.com with a list of parts you are looking for, I will reply with details including photos if I have anything suitable in stock. Cheers Simon
March 28th, 2022 at 8:43 am
Do you have a screen for 89 zxr400h?
March 28th, 2022 at 9:12 am
Sorry no
August 23rd, 2022 at 3:02 pm
Hello there looking for front forks for a zzr250 registered as a ex250 1998 any thing available thanks
August 23rd, 2022 at 5:06 pm
Sorry all sold
April 12th, 2022 at 11:36 pm
Hi I have a kawasaki ninja zx9r
Rego A1DAT
Need an ignition barrel plus key if possible please or recommendations if I can get as doesn’t need to be original.
April 13th, 2022 at 10:14 am
Hi Lee,
I have a couple of options so if you can email me at goodpartsnz@gmail.com I will reply with details including photos for you to compare. Cheers Simon.
April 24th, 2022 at 1:15 am
Chur afta a accelerater cable for a 1991 Kawasaki zr
April 24th, 2022 at 7:09 pm
Hi Dan, what model is this for?
April 24th, 2022 at 3:01 am
250cc zzr 1992 airbox 02041247179
April 24th, 2022 at 7:10 pm
Sorry I cant help with that one.
April 26th, 2022 at 10:32 am
Hey Mate, do you have the plastic bit of fairing that goes around the taillight of a 1989 ZXR250A?
Cheers
April 26th, 2022 at 10:52 am
Sorry I cant help with that one currently.
May 2nd, 2022 at 7:56 pm
hey mate, do you have a stator and generator rotor off a 1991 gpz500s?
thanks
May 2nd, 2022 at 8:02 pm
Sorry no
May 3rd, 2022 at 9:56 am
Sorry no.
May 20th, 2022 at 1:55 pm
Hello my name is Brooke Tyler I am looking for some plastics for a 1990 kawasaki ninja 600r gpx if possible please.
May 20th, 2022 at 2:47 pm
Hi Brooke. I may have some plastics to suit the GPX600 although not many. If you email me at goodpartsnz@gmail.com I can then reply with details including photos. Cheers Simon
August 17th, 2022 at 3:57 pm
Hi
I’m after a price for a 2005 or 2009 Kawasaki ninja zx10r rear back wheel please or beable to point me in the direction
Thanks
August 17th, 2022 at 4:03 pm
Sorry I cant help with that one.
September 5th, 2022 at 10:43 am
Hi I’m after igniter and cdi for 1986 kawasaki gpz400
September 5th, 2022 at 1:10 pm
Hi. The ignitor and CDI are the same thing. I may be able to help, so if you can email me at goodpartsnz@gmail.com I will reply with details including photos. Cheers Simon
September 7th, 2022 at 10:46 pm
Hi do you have a zxr250 rear fender mud guard
September 8th, 2022 at 10:37 am
Sorry rear mudguards in stock
November 19th, 2022 at 4:14 pm
Hello, I’m looking to enquire about the Kawasaki zr250 balius regarding an engine
Thanks, nick
November 20th, 2022 at 9:56 am
Hi Nick. I don’t have a Balius engine in stock currently, but may have another bike coming in, although it won’t be straight away. If you are not in a hurry for an engine, please email me at goodparrtsnz@gmail.com and we can discuss. Cheers Simon
November 21st, 2022 at 9:11 am
Hey mate, the goodparts email address isn’t working so I send here
last one dropped a valve and destroyed the entire thing No rush but I would love to use it through this summer
Any idea when you think you would be getting that balius?
Thanks, Nick
November 21st, 2022 at 9:13 am
Sorry Nick. the email is goodpartsnz@gmail.com so try again. Ill make some enquiries about the Balius, but it may not be available until the new year.
December 7th, 2022 at 11:33 am
Hi there
I am after a throttle cable for kawasaki klr650. Any chance you have one that might fit?
Regards
Phillip joll
December 7th, 2022 at 1:15 pm
Sorry I cant help with that one.
December 8th, 2022 at 7:10 pm
You got a KR250A fairing screen in fair condition?
December 8th, 2022 at 9:29 pm
Sorry no.
February 5th, 2023 at 6:55 pm
Hi, do you still have the side stand switch for the z750? Also the clutch cable adjustment bolt (the one with the slot in it)?
February 6th, 2023 at 9:28 am
Hi. Yes I can supply a side stand switch from the 2004 Z750 at $25 plus postage. Will also have a suitable clutch cable adjuster. Pleae email me directly, at goodpartsnz@gmail.com
February 6th, 2023 at 10:37 pm
Hi
I need a fairing kit for a 2009 z750 please
February 7th, 2023 at 8:48 am
Sorry I cant help with that one.
February 16th, 2023 at 5:48 pm
Hi. Front disc for ZXR400? Thanks
February 16th, 2023 at 5:54 pm
Sorry I cant help with that one.
February 21st, 2023 at 10:27 pm
Zxr 250 C front disc rotor, front fairings, l h engine cover
February 22nd, 2023 at 8:08 am
Hi Jake. I will have front brake rotors, engine stator cover and some fairing panels in stock. If you can email me at goodpartsnz@gmail.com I can then reply with details including photos. Cheers Simon
March 23rd, 2023 at 8:22 pm
Hi do you have a radiator for a Kawasaki er 500?
March 24th, 2023 at 9:00 am
Sorry no.
April 9th, 2023 at 3:19 pm
Hi, Do you have any parts for KR150 1989,
Cheers Al
April 9th, 2023 at 5:43 pm
Sorry no.
April 16th, 2023 at 12:02 pm
Good day
I am looking for a complete clutch lever for a Kawasaki GPZ 750 1984 model
Thanks
April 17th, 2023 at 6:20 pm
Sorry I cant help with that one.
April 27th, 2023 at 12:43 pm
Hi i am looking for front headlights to fit a kawasaki 1989 zxr 250 pls
April 27th, 2023 at 6:47 pm
Hi Andy. I have the twin headlight assembly from a ZXR250A in stock at $120 plus postage. If you email me at goodpartsnz@gmail.com I can provide further details. Cheers Simon
May 28th, 2023 at 12:41 am
Hi looking for a cdi for zxr750
May 28th, 2023 at 5:51 pm
Sorry I cant help with that one.
May 30th, 2023 at 7:41 pm
Hi,
I’m after the rear suspension for a kawasaki zzr 600 e1 1993. Do you have that?
Thanks
May 30th, 2023 at 8:56 pm
Sorry I cant help with that one.
July 2nd, 2023 at 8:33 pm
The zzr600 2004,
Would the rear shock set up be available?
July 2nd, 2023 at 8:39 pm
Sorry sold
August 21st, 2023 at 1:18 pm
GPX750 petrol tank ?
Thanks
Gordon
August 21st, 2023 at 6:37 pm
Sorry no
September 17th, 2023 at 9:35 pm
Hi there,
I am looking for fork assembly for ’91 ZXR250C. Is there any left? Hope to hear from you soon.
September 20th, 2023 at 7:09 am
Hi. I should have a pair of forks for the ZXR250C in stock, but I’m currently away on holiday until October 13th, and cant conform until after I return. If you are still interested, please email me at goodpartsnz@gmail.com
October 27th, 2023 at 10:25 pm
how much do you want for a 2008 600/636/900 speedo assembly
October 28th, 2023 at 9:21 am
Sorry no parts in stock for those models.
November 6th, 2023 at 6:17 pm
Hi looking for a tank !!?
November 6th, 2023 at 6:40 pm
For what model?
January 3rd, 2024 at 4:34 am
Need a seat coild packs and Carb from a kawasaki zzr400
January 3rd, 2024 at 9:02 am
Sorry I cant help with those.
March 3rd, 2024 at 11:28 am
Hi im looling for front upper and lower cowling/tailings for 90″ZZR600
March 4th, 2024 at 8:44 am
Will reply to your email
April 9th, 2024 at 11:04 pm
Hi, Im after the following parts for my 1989 GPX 750R
12020-1060 Rocker shaft – 2x of
12016-1073 Rocker arm -4x of
12005-1077 Exhaust valve – 2x of
12044-1227 Exhaust cam – 1x of
Plse confirm if you can help
Cheers
Hannes
0276535956
April 10th, 2024 at 6:07 pm
Hi Hannes. I have a complete head assembly for a GPX750 which has all the parts you require plus more. I don’t wish to separate parts from the head so it would be sold complete at $200 plus postage. If you are interested, please email me at goodpartsnz@gmail.com