Good Parts Motorcycle Dismantlers Christchurch ships pretty much anywhere in the world.
For any enquiries, please email us on goodpartsnz@gmail.com
Good Parts Motorbike Parts Warehouse
We’d be happy to serve all your motorcycle parts needs.
Good Parts Motorcycle Dismantlers Christchurch ships pretty much anywhere in the world.
For any enquiries, please email us on goodpartsnz@gmail.com
Good Parts Motorbike Parts Warehouse
We’d be happy to serve all your motorcycle parts needs.
February 23rd, 2011 at 2:00 pm
looking for a battery for a BMY K75S
March 2nd, 2011 at 11:25 pm
Hi Mike,
sorry I didnt see your query until today, but could well have been due to the earthquake we sufferred on the 22nd. Sorry I cant help with any parts for the K75
Cheers
Simon Gooding
January 6th, 2016 at 4:54 pm
looking for a dash for hyosung gt250r 2007
January 6th, 2016 at 5:34 pm
Hi. I can supply a dash assembly in good order at $180. You can email me directly at goodpartsnz@gmail.com if you would like more details including a photo. Cheers Simon
January 26th, 2021 at 2:38 pm
Hello I looking for fuel tank for Suzuki gsx r 1991 model
From Thad
January 26th, 2021 at 6:18 pm
Sorry I cant help with that one.
May 15th, 2020 at 1:24 am
Hi Simon, I’m after exhaust headers for Honda CB400SF Spec 3 (I believe Spec 1-3 should all fit same).
Thanks
May 15th, 2020 at 10:02 am
Sorry cant help with those. Cheers
July 2nd, 2021 at 9:28 am
Hi
I am on the hunt for a gen1 or gen2 Hayabusa engine do you have any?
happy to go on a waiting list if none available
Thanks Trent
July 2nd, 2021 at 10:17 am
Sorry nothing in stock and its unlikely I will get any of these in the near future. They are very sought after and many people now buy a complete road worthy Hayabusa and remove the engine/electrics before selling the remaining rolling frame etc (possibly to a dismantler like myself). Cheers
July 6th, 2021 at 9:56 pm
Hello, I am looking one carburetor assy P/N 3yx-1490x-00 from Yamaha FZX250 1991. Or the full carburetors
July 6th, 2021 at 11:09 pm
Sorry carbs have sold
February 24th, 2022 at 4:39 pm
2005 pgo t rex 150 . Brush assembly for starter motor . Or complete starter
February 24th, 2022 at 5:40 pm
Sorry no scooter parts in stock.
December 13th, 2022 at 11:03 am
Hello.Do you have a right hand mirror for a 2005 dl650 vstrom.
Thanks
Paul
December 13th, 2022 at 7:48 pm
Sorry no.
March 2nd, 2011 at 8:35 am
Hi i need right side handlebar and brake/footrest braket same side for my zx9rc1 any help would be great thanks,bloody eq
March 2nd, 2011 at 11:27 pm
Hi Craig,
I have a 1998 ZX9 in stock and the RH footpeg hanger is available @$60. Sorry cant help with a good RH bar currently. Cheers Simon Gooding
March 26th, 2011 at 12:40 pm
Hi,
I need an alternator cover for a 1989 fzrr250 3ln..could you be of any help??
March 28th, 2011 at 8:31 pm
Hi Johannan,
sorry but I cant help with an alternator cover currently. Cheers Simon
April 16th, 2011 at 12:02 am
am after for a gsx600f 89
rear tail light lens
rear seat grab bar
front wind screen
rear brake disk (thicker than 6mm )
cheers in advance
April 19th, 2011 at 5:15 pm
Hi I have a 2009 hyosung GT250R. I was looking for RH Footpeg Bracket. Just wondering if you have any and how much would that cost and also for shipping.
April 19th, 2011 at 11:07 pm
Hi .
Sorry cant help with any Hyosung parts currently.
April 27th, 2011 at 2:27 pm
Hi, I’m after some GB400 or 500 parts. Cam, head assembly. Let me know if you have anything, thanks
April 27th, 2011 at 8:34 pm
Sorry cant help currently. I have dismantled a GB500 but engine had been fully reconditioned and was sold as a complete unit. Cheers
May 4th, 2011 at 10:13 am
the GSXR-1100L rear wheel is a 5.5″? how much (including cush drive) to Welliwood? thanx
May 4th, 2011 at 10:50 pm
Hi,
yes the rear wheel is a 5.50×17 and in very good order. The bike was a low mileage bike and hadnt been involved in an accident. It was purchased by the previous owner for the engine to replace a blown engine in a race car, and the remainder of the bike was on sold to me for dismantling. The rear wheel with sprocket carrier is available at $150 plus shipping. Freight is probably cheaper than post and should be around $30 depending on where you are in Wellington.
May 4th, 2011 at 5:30 pm
Hi there,
Im after an oil cooler for a Kawasaki ZZR1100 do you have one in stock or know where i might find one?
Much appreciated
May 4th, 2011 at 10:54 pm
Hi. yes I can supply an oil cooler from a ZZR1100 in good order at $100 plus postage. Cheers
May 10th, 2011 at 5:08 pm
Hi, any chance you have 2003-5 GSXR1000 handlebars?
Cheers
Tina
May 10th, 2011 at 8:25 pm
Hi Tina,
sorry no GSXR100 parts currently. Cheers Simon
May 11th, 2011 at 11:33 pm
hello i am looking for a road bike motor and everythink to get it running some think over a 600cc for my buggy can you help
May 11th, 2011 at 11:53 pm
Hi Daniel,
i have a few options available but it depends on your budget. I have a 1989 Suzuki GSX600F engine package available complete with loom electrics and oil coller (engine is oil and air cooled rather than water cooled). Header pipes included as well, although one header pipe will require some repairs. Bike had done high mileage (apprx 100,000km) but engine started and ran very well., and they are a pretty builet proof engine. The complete package is available at $850. Cheers
May 16th, 2011 at 2:10 am
hi there do you have honda vtr250 engin + box for sale ?cheers
May 16th, 2011 at 7:17 pm
Hi Jack.
Sorry I cant help with VTR parts currently . I do have an engine for the earlier VF250, but that wont be suitable for your VTR. Cheers Simon
May 17th, 2011 at 5:59 pm
Hey Guys
Im after some electric parts for a jincheng jc 250-6
i am aware that this bike is very hard to come by anywhere in the world, but have been pointer to the honda CB 250 as this has the same firing configuration and engine setup as the jincheng, i have a feeling that the CDI and coil have gone, do you guys have access to any of these parts or know of another bike that has the same setup.
May 17th, 2011 at 10:24 pm
Hi,
I think you have already contacted me directly. I may have some CB250 parts but they are part of a large parts lot I purchased recently and I wont be able to have a look for a week or two at least. Cheers Simon
May 18th, 2011 at 12:15 pm
Hi…looking for an engine for a 89 VS750 Intruder. Will the engine from the VS700 or 800 fit cheers…Mal
May 20th, 2011 at 9:47 am
I am after a suzuki Hayabusa K8 or K9 engine or engine parts-
can you help?
May 22nd, 2011 at 8:42 pm
Hi Stuart,
sorry cant help with any engine parts for the late model Hayabusa currently. Cheers Simon
May 22nd, 2011 at 11:23 pm
Hi, do you have a motor, carbs and oil cooler for a ZZR600 D (Pre 93)? Failing that, a set of carbs for a ZZR400 K1-3 (Pre 93)
June 1st, 2011 at 2:02 pm
Hi there,i am looking for 06ish Buell lightning alloy shrouds left and right & fly screen,seat and tail unit.
can you help out
Cheers
Steve
June 1st, 2011 at 7:07 pm
Hi Steve,
sorry but I dont have any Buell parts currently. Try Lindsay at Christchurch Motorcycles and if he cant help I am sure he will know someone who can. Cheers Simon
June 2nd, 2011 at 2:47 pm
hi we have a 1998 honda CBR900RR we are looking for a headlamp for this a 1999 CBR900RR has same headlight marked STANELY 6362.Thanks David
June 2nd, 2011 at 6:51 pm
Hi David,
sorry cant help as the bike I have dismantled had the headlight broken in an accident. Cheers Simon
June 4th, 2011 at 11:42 pm
Do you have a fairing set for a CBR250RR MC22, thanks
June 5th, 2011 at 9:37 am
Hi. Sorry no fairings currently, only the left and right side rear panels. Cheers
June 14th, 2011 at 12:22 pm
hi, hope you guys are safe and sound after the latest earthquake. I’m looking for some hyosung gt250r parts, just wondering if you have any in stock. brake cylinders, calipers, indicators, some other parts, thanks.
June 14th, 2011 at 8:47 pm
Hi. Yes we are some of the lucky ones with minimal damage, but its certainly wearing our nerves down to say the least. Sorry cant halep with any Hyosung parts. Cheers
June 14th, 2011 at 2:10 pm
Hi there,
I’m looking for a petrol tank of Suzuki GS500F year model from 2004 onwards,just wondering if you have an available or can source it out.If you have please just let me know how much and the cost of the shipping to Wellington,cheers and have a good day!!!
June 14th, 2011 at 8:46 pm
Hi. Sorry cant help with that one. I havent seen anyone else advertising that they are dismantling a late model GS500 either. Try Bike Busters near Hamilton. Cheers
June 19th, 2011 at 8:20 pm
hi there, im in need of a 49cc airfilter flange about 33 35 m so i connect the air filter,bike is for my daughter
June 19th, 2011 at 9:47 pm
Hi Jim,
sorry dont think I can help with that one, but shouldnt be too hard to find a piece of rubber house of a similar diameter. Some radiator hoses might do the trick. Try a local car dismantler and see if they have something you could cut down. Cheers
June 24th, 2011 at 7:49 am
hi. do you have front forks for the 2001 bandit 1200?
June 24th, 2011 at 7:32 pm
Sorry they have sold.
July 4th, 2011 at 9:40 am
looking for a tappet cover and rocker gear and cam for a 96 husaberg 501 fc do you have anything cheers
July 4th, 2011 at 6:47 pm
Hi Neal,
sorry cant help with any parts for that model. Cheers Simon
July 11th, 2011 at 9:22 pm
Hi there,
Any chance youve got any parts for a 1987 CBr 250 Mc17
Much appreciated if you do.
Do you know if the fairings of the later models will fit?
If so? How much??
July 11th, 2011 at 10:17 pm
Hi Barry. yes I have a number of parts for the MC17, but sorry no fairings. The later MC 19 fairings could likely be made to fit, but not sure how much trouble you would need to go to. You can email me direct at goodpartsnz@gmail.com with a list of parts you are looking for. I am heading overseas tomorrow, returning on July 31st, so wont be able to help until after I return. Cheers Simon
July 20th, 2011 at 2:24 pm
HI there I’m chasing a Suzuki B120 Stator Cheers Steve Vintage and Modern Cycles
August 1st, 2011 at 11:06 pm
Hi Steve,
sorry for the late reply, as i have been overseas on holiday.
I have a B120 parts engine that should have a stator on it. email me directoly at goodpartsnz@gmail.com and i can supply more details. Cheers Simon
September 23rd, 2011 at 6:48 pm
Hi. I am looking for a rear brake lever for a 1983 Honda CM400 roadbike. Can you help?
September 23rd, 2011 at 8:57 pm
Hi Ian,
I have one from an earlier CB400T which may be the same. Will email you a photo. Cheers Simon
September 27th, 2011 at 12:44 pm
Hey Simon,
I’m after some short, rear shocks for a Yamaha SR 250 to get it through compliance. It’s been bobbed but i have to have shocks rather than steel struts to pass. The shocks i’m after need to be preferably between 230-250mm eye to eye. ANYTHING that will fit is fine, doesn’t have to be yamaha at all.
Cheers mate, Mark
September 27th, 2011 at 9:46 pm
Hi Mark,
thats quite short, but will see if I have anything that may be suitable.
Will email you directly before the end of the week with photos if I have anything. Cheers Simon
October 12th, 2011 at 10:50 am
Hi, I’m looking for the entire speedo/tacho assembly for a 1995 Suzuki GSF250, GJ77A. You don’t happen to have any lying around? Cheers, Dylan
October 12th, 2011 at 9:34 pm
Sorry Dylan, cant help with those currently. Cheers Simon
October 31st, 2011 at 11:02 pm
Hi,
Do you have a right hand footpeg bracket for a 1990 vfr400r NC30?
Cheers
November 1st, 2011 at 8:25 pm
Hi Aaron,
sorry cant help as i havent dismantled an NC30 as yet. Cheers Simon
December 22nd, 2011 at 4:31 pm
hi
am after a voltage regulator for a honda vt 250. 1988
mike
December 22nd, 2011 at 4:46 pm
Hi Mike, I have replied to yoru email directly. Cheers Simon
December 28th, 2011 at 3:09 pm
Hi,
I’m after side covers for a GN250 1986 (black color with red & gold stripes).
Thanks
Roy
0274 666 042
January 2nd, 2012 at 8:04 pm
Hi Roy,
the only GN250 sidecovers I have currently are a set of fibreglass sidecovers. They are currently black, but you may want to repaint them and then add your stripes. These are available at $50/pair. If you email me directly at goodpartsnz@gmail.com I will send photos. Cheers Simon
January 2nd, 2012 at 9:39 pm
Hello,
I’m looking for some parts for a GSX 1400. It’s 2007, but I doubt these parts differ much from the 2001 model I see you have listed:
1 – Clock covers
2 – Enging timing cover
3 – Headlight lens cover and outer case
4 – Throttle cable rubber (happy to take cables if you can’t split)
5 – Rear break lever
6 – Front mudguard
7 – Right/throttle side mirror
I would also be interested in these bits for the same bike as well if you’ve anything that might fit:
8 – Belly pan
9 – Fork brace
10 – Yoshimura end can
Many thanks for any help you can provide.
Regards
Roy
January 2nd, 2012 at 9:51 pm
Hi Roy,
I currently have very few parts left for this model, and unfortunatly dont have any of the parts you have listed. Cheers Simon
January 4th, 2012 at 9:18 pm
Hi There
Suzuki RF900R (97) Parts required if you can help, bracket footrest R/H 43511-21E00, Cover under cowl R/H top vent
94430-21E00-Y22
R/H Mirror complete.
Or anything you have that might be suitable.
Kind Regards
Steve
January 4th, 2012 at 9:58 pm
Hi Steve.
Thanks for your enquiry. Your in luck, as I am currently dismantling a 1997 RF900 and should be able to supply all the parts you have listed. I will email you directly. Cheers Simon
January 7th, 2012 at 8:53 am
Hiya,
I am after some parts for a suzuki FXR150 (2002).. Do you have any parts available or know of where some would be?
I am after the windsheild, exhaust cover (silver one unmarked)..
Thank you.
January 7th, 2012 at 7:50 pm
Hi Daniel,
sorry no FXR150 parts in stock currently. Cheers Simon
January 7th, 2012 at 9:15 pm
Gday dude hope your fairing well after all the shaking. im a cantab myself. my heart goes out to all those affected over this last year and a bit.
Any who. im lookin for lots of spares for a late 70’s early 80’s xs250/400 as most parts are the same im told. Also i need electrics, air box, carby for a 86 ax100. if you can get any of these parts or know where to sourse that would be freakin great.
Cheers Kris
January 7th, 2012 at 9:24 pm
Hi Kris,
yes its certainly been an ‘interesting’ year in Christchurch and its not over yet! Only yesterday I was shopping in our local supermarket when a strong aftershock hit. Stuff fell off the shelves and kids were crying, but its just another day in Christchurch!
I have recently purchased a large parts lot which contains many parts for the older models, inluding the XS250/400. While I still have a long way to go to make an inventory of everything I have, I have come accross some parts from that model, so email me at goodpartsnz@gmail.com and let me know what your looking for, and I will see what I have. Dont think I can help with parts for the AX100. Cheers Simon
January 14th, 2012 at 9:55 am
hi im after a complete hyosung 250 engine to replace mine ?
January 14th, 2012 at 5:49 pm
Hi Mathew,
sorry no Hyosung parts currently.
January 24th, 2012 at 4:37 pm
Can you help with a new ignition barrel and key to suit a Suzuki GSX1100F (1988)
January 25th, 2012 at 8:28 pm
hea mate can you help with a front right hanger for honda cbr 900 rr fireblade year 2000
cheers
darin
January 25th, 2012 at 10:13 pm
Hi Darin.
I have a RH footpeg hanger from a 1999 CBR900RR, but not sure if its the same as your 2000 model. email me at goodpartsnz@gmail.com and I can send a photo for you to compare. Cheers Simon
January 30th, 2012 at 1:32 pm
Hi,
Have you got any parts for a Piaggio Fly 150? Thanks
February 3rd, 2012 at 2:40 pm
Hi There Can you let me know if you have any parts available for Yamaha V Max – model between 1985 and 2003.
Regards
John
February 3rd, 2012 at 10:04 pm
Hi John. The only V-Max parts I have is a set of forks and triple tree from the early model (before they increased the dia of the forks. Cheers Simon
February 8th, 2012 at 4:43 pm
Bugger!
February 3rd, 2012 at 10:30 pm
Hi
I looking for a 98-00, GSXR600 Engine.
Cheers,
February 4th, 2012 at 10:10 pm
Hi Anthony.
I have most parts from a 2001 GSXR600 engine which did a big end bearing, but otherwise nothing else currently. Cheers Simon
February 10th, 2021 at 10:04 am
Hi mate I’m looking for speedo diameter for my Lifan 250 H v-twin Delta
February 10th, 2021 at 4:07 pm
Sorry I cant help with that one.
February 11th, 2012 at 7:36 pm
hi do you have a GS650G katana? Looking for any spare parts but whole bike would be ideal. Motor can be blown just need parts off it. Thanks
February 14th, 2012 at 12:28 pm
Hey Simon
I was looking for a pair of coils for 98 zx6? can you let me know price etc
Cheers Peter
Raecin Motorsports
February 14th, 2012 at 5:51 pm
Hi Pete,
dont have anything from a ZX6, but have others that may suit. Will email you directly. Cheers Simon
February 14th, 2012 at 4:04 pm
HI there,
I am after an airbox for a 2001 GSF Suzuki Bandit 1200S – can you oblige?
February 14th, 2012 at 5:51 pm
Hi Patrick. Sorry cant help there as I have sold the airbox from the Bandit 1200 I am dismantling. Cheers Simon
February 15th, 2012 at 11:59 am
Thanks – sorry I sent another message – couldn’t recall who I had sent messages to… 😉
February 19th, 2012 at 8:46 pm
Hi after a Cdi unit for a Suzuki 1992 bandit 250 number on box 32900-11d10
February 19th, 2012 at 8:50 pm
Hi. I can supply a CDI from the early model Bandit 250 (I have one from a 93) @$140 plus posatge. Email me directly at goodpartsnz@gmail.com and we can sort out the details. Cheers Simon
February 21st, 2012 at 12:03 pm
Good day, I am looking for some Honda MB100 parts for my bucket.
In need of a crank and if you sell new conrod kits(TKRJ)that would be great.
Thank you,
Ren
February 21st, 2012 at 6:04 pm
Hi Ren,
sorry cant help with any MB100 parts. Cheers Simon
February 23rd, 2012 at 10:20 pm
hey mate
im looking for a size 17 rim for my cbr900rr, as it has a size 16 rim and i here its better with a size 17 rim. i also here there are other honda bikes that have a 17″ rim that suit suit the bike can you help.
no matter the colour ill get it painted.
Cheers
Darin
February 24th, 2012 at 7:14 pm
Hi Darin,
sorry cant help with a suitable 17″ front wheel currently. Cheers Simon
February 28th, 2012 at 11:43 pm
Hi there, I’m looking 4 the splines that r on the wheel (might have 2 buy whole wheel) of a 1982 Vf750 sabre, this is the shaft drive splines, cheers neil
February 29th, 2012 at 7:13 pm
Hi Neil,
I should be able to help with that, but need to check tomorrow and make sure splines are ok. No need to buy the rear wheel unless you want to. Email me at goodpartsnz@gmail.com and I will get back to you ASAP. Cheers Simon
March 4th, 2012 at 2:44 pm
hi mate i noticed you’ve got a VS700 that you’re wrecking. i need the covers off the engine and gearbox from top to bottom can you help? can you let me know if you have them and how much and also how much you want for the whole motor – thanks
March 4th, 2012 at 9:00 pm
Hi Duanne. I can supply the engine covers, as i have a more or less complete engine thats been stripend down due to a main bearing failure on the crankshaft. I will email you directly with more details. Cheers Simon
March 5th, 2012 at 6:36 pm
hi i’m looking for price and availability for a front fairing for a GSXR 750j not including the windscreen and a price to ship to Auckland if possible?
Thanks
David
March 5th, 2012 at 9:57 pm
Hi David, the only upper front fairing I have for that model has been shortened down to below where the mirrors would mount. You may have a brocken fairing and be able to make one good one from the two with plastic welding. I do have a few other fairing and bodywork panels from the J model. You can email me directly at goodpartsnz@gmail.com and I can send photos if your interested. Cheers Simon
March 8th, 2012 at 8:57 pm
hi there,
im looking for a stator for a cbr900rr and a regulator from a cbr1000rr
can you help?
cheers darin
March 8th, 2012 at 8:57 pm
1999 from above
March 9th, 2012 at 2:10 pm
Hi, i am looking for a fuel pump for an FJ1200 1992
Thanks, Marcus, Fiji
March 21st, 2012 at 12:18 am
80s honda cd250 parts
battery and airbox covers
seat and standard grab rail
gear shift lever
both rear indicators
key ignition with key
speedo instriment with cable
if available please include individual prices
much apreciated
March 21st, 2012 at 6:56 pm
Hi Wayne.
Sorry no CD250 parts in stock currently.
Cheers
Simon
March 23rd, 2012 at 12:36 pm
hi,wanting to purchase your er 5 engine package.could you contact me please.regards barry jessop motorcycle services masterton 06 3772129
March 24th, 2012 at 7:56 pm
hi there im after a stator an flywheel for my gsxr 250 how can i get this off you and
March 24th, 2012 at 7:57 pm
can list 1 on trade me for me i have the blue gsxr you said you could do me a pair for 150 cheers
March 24th, 2012 at 8:15 pm
Hi Darry,
thanks for your enbquiry. Email me directly at goodpartsnz@gmail.com and we can go from there. Cheers Simon
March 24th, 2012 at 8:16 pm
No problem. Just email me at goodpartsnz@gmail.copm Cheers Simon
March 29th, 2012 at 9:50 pm
I need a instrument cluster for 2007 gsx 1400
April 8th, 2012 at 11:05 am
Honda NS250R 1986 Just wondering if you still have any parts for the ns250r? I’m looking for a fuel tank right now.
April 10th, 2012 at 7:27 pm
Hi Will,
I do have a number of parts available for the NS250R MC11, including a fuel tank. The tank is straight but would need a repaint. Bare tank is available at $100 and you can email me at goodpartsnz@gmail.com if you would like more details including photos. Cheers Simon
April 27th, 2012 at 2:52 pm
Hi, I’m looking for a GN250 carb? as new as possible
Cheers, Doug
April 27th, 2012 at 7:25 pm
Hi Doug,
sorry but nothing in stock currently as they tend to sell quickly. The only one I have is on an early model (1984), so not what you require. Cheers Simon
April 27th, 2012 at 8:44 pm
Thanks for the reply
I’m interested if it doesn’t leak and the slide’s okay?
April 27th, 2012 at 10:27 pm
Its is still on a complete bike, and from memory it shows no signs of leaking and bike ran ok. Will check it out for you over the weekend. Your looking at $50 for the carb, and you can email me at goodpartsnz@gmail.com. Cheers
April 28th, 2012 at 9:43 pm
Hi there,
you don’t by any chance have a reasonable near new front tire 130/70-ZR16 its for my Honda CBR 900 ??
Thanks
Darin
April 28th, 2012 at 10:21 pm
I have one front tyre of that size in stock. Will email you details direct. Cheers
April 28th, 2012 at 9:54 pm
gidday
got any parts for a 2000 honda CBR929 fireblade?
specifically a rear master cylinder would be great. i notice you have a 1999 CBR900. any chance that has a rear mastercylinder that might fit? from memory mine has 5/16 written on back
ta
jess
April 28th, 2012 at 10:26 pm
Hi Jess, I have a rear master cylinder from the 1999 CBR900RR. I will email you direct and send a photo so you cab compare. Cheers
Simon
May 6th, 2012 at 10:31 am
howsit after an igniter for a klx250 part number 21119 1381
cheers
May 6th, 2012 at 8:34 pm
Hi Leov,
I have a CDI from a KLX300 and will check out the part number and get back to you in a day or two. Cheers
Simon
May 7th, 2012 at 10:45 pm
hay mate i got a 91 cbr600f was after a pair of front folks of one or somthing simlar
May 7th, 2012 at 10:57 pm
Hi Mike,
dont think I can help. I assume your bike is the F2 model. I have a set of forks to fit the earlier CBR600F Hurricane (1987-90) but they are different to the later F2 model. Cheers
May 7th, 2012 at 11:07 pm
hi mike again i dont think mines a f2,would you be able to send a piture of folks.what sort of price
May 7th, 2012 at 11:13 pm
Hi Mike,
email me directly at goodpartsnz@gmail.com Cheers Simon
May 12th, 2012 at 12:58 am
Hi, im after a good condition rust free tank for a NC24 VFR400R (ive heard NC21 predecessor might work too)
also after the centre cap for rear wheel to cover wheel nuts (pro-arm model) and a price for postage, cheers
May 12th, 2012 at 8:47 pm
Sorry cant help with either of those currently. Cheers Simon
May 31st, 2012 at 11:24 pm
Hi im looking for a loom and cdi for a 1989 gsxr750
June 4th, 2012 at 9:03 am
Hi, am I am looking for a Honda NS250R MC11 1986 piston (KM4 N1). Would you have any in stock and what would be the costing?
Cheers Kerran
June 4th, 2012 at 6:57 pm
Hi Kerran,
sorry cant help with pistons currently as those from the ‘parts’ engines I have in stock have sold. I do have a number of loose un named pistons in a bin and if you were able to email me a photo of one of your pistons, plus some dimensions, I could see if anything matches. You can email me at goodpartsnz@gmail.com Cheers Simon
June 11th, 2012 at 4:30 pm
Would love a right handle bar and indicator for a hyosung
June 11th, 2012 at 8:29 pm
Sorry no Hyosung parts currently. Cheers
June 11th, 2012 at 4:32 pm
Cheers by the way
June 11th, 2012 at 8:29 pm
As below, Sorry no Hyosung parts currently. Cheers
June 18th, 2012 at 10:38 am
Hi im looking for a 2006 Honda VTR 1000F Clutch lever, can you help?
June 25th, 2012 at 6:28 pm
Hi im after a engine with all the parts to make run for a gokart around a 250cc too 400cc two or four stroke just wanted some prices as i see you have a few bikes? cheers
June 25th, 2012 at 10:42 pm
Hi Hamish,
I have emailed you direct. Cheres Simon
June 29th, 2012 at 12:44 pm
Gidday. Can you please advise price and availability of some parts I need for a 1986 Suzuki GSX1100EF I have recently aquired. Parts are LH rear view mirror, LH rear indicator and a small piece of bodywork that goes between the rear seat and the tail light. Cheers.
June 29th, 2012 at 10:25 pm
Hi Rheet.
I cant help with a mirror or the rear bodywork, but I have a 1989 GSX750ESG in stock which looks to have the same type rear indicators. Email me at goodpartsnz@gmail.com and i can send a photo for you to compare. Cheers Simon
June 29th, 2012 at 2:43 pm
Hey im after a front left footpeg for a kawasaki ninja 250gpx 1987
June 29th, 2012 at 10:26 pm
Hi Steven. I have emailed you directy and should have one in stock.
July 7th, 2012 at 6:08 pm
do you have brake calipers off the 83 GPz 750?,cheers
July 9th, 2012 at 8:47 pm
Hi Wayne,
yes I have both front calipers avaibale. They are in very tidy order cosmetically, but have been sitting for quite some time without brake fluid , so may need new seals atc. Its possible they will be fine, but I cant guarantee it. $45 each. You can email me directly at goodpartsnz@gmail.com and I can email a photo. Cheers Simon
July 24th, 2012 at 4:25 pm
NEED TO TRACK DOWN A FUEL TANK FOR A GSX600F KATANA (88?).
ANY AVAILABLE OUT THERE.
July 24th, 2012 at 10:39 pm
Hi Rob,
I have a fuel tank for this model in tidy order. Please email me directly at goodpartsnz@gmail.com and I can send photos . Cheers Simon
August 17th, 2012 at 2:46 pm
Hey i have a suzuki 2004 invader and im looking for left side ferrings.
If you have any or know how i can get hold of some that would be amazing.
Email on ahchee.t@gmail.com
Thanks a lot.
Tao
August 22nd, 2012 at 7:09 pm
Hello I’m after several pieces for my 2001 GSX-R1000 K1:
1)Coolant Resevoir
2)Left hand handle bar
3)Left hand mirror
Also after rear fairing piece in the black/silver/blue paint scheme if you have it.
August 22nd, 2012 at 8:04 pm
Hi. Sorry cant help with any of those currently. Cheers Simon
August 28th, 2012 at 9:36 pm
hi simon, have u got a stator and a regulator 4 a 1982-3 vf750 sabre, cheers neil
August 28th, 2012 at 11:46 pm
Hi Neil,
I will have a stator coil available at $100. I dont have a rectifier from the Sabre, but should have one of the same type from another Honda model at $80. Email me directly at goodpartsnz@gmail.com Cheers Simon
September 8th, 2012 at 2:26 pm
Hi Im after a front brake calliper assembly for a 2007 drz 250??
September 10th, 2012 at 7:18 pm
Sorry cant help with that one.
September 26th, 2012 at 2:30 pm
Looking for an alternator for CBR900RR 1998 Fireblade. Thanks.
September 26th, 2012 at 7:50 pm
Hi Judy. Sorry cant help with that one currently. Cheers Simon
October 10th, 2012 at 4:54 pm
HI looking for a rear grab bar and undamaged pipes for a 76 Gt750 suzuki
October 10th, 2012 at 6:34 pm
Sorry cant help with those Tony. Cheers
October 24th, 2012 at 8:50 pm
Hello Gn250 2005 recifier/reg. ..Cheers Dan
October 24th, 2012 at 9:02 pm
Hi Dan. I have one from the earlier model GN250 (they will fit all models) at $80 plus postage. Email me at goodpartsnz@gmail.com
Cheers
Simon
November 2nd, 2012 at 10:21 am
Hi
I am after a fuel tank for my baby.
She is a 1995 Honda CB400 Project Big 1.
NC28E-1381992 (or according to web NC31.
Can you help please?
Cheers
Liz
November 2nd, 2012 at 9:53 pm
Hi Liz,
not many of these models about and very few will have been dismantled, but your in luck as I have a tank available. Please email me directly at goodpartsnz@gmail.com and I can send photos and further details. Cheers Simon
November 10th, 2012 at 2:47 pm
Hi, Do you have any mufflers for a Suzuki GSX1400 2001? This is the 4 into 2 model. Cheers Troy
November 10th, 2012 at 10:14 pm
hi Troy,
sorry cant help with those. Cheers Simon
November 14th, 2012 at 12:55 pm
Hi There,.do you have any LS 650 Suzuki Savage parts ?? ( 1987 I think ) I’m after a head light .
Cheers.
Kevin A.
November 14th, 2012 at 10:55 pm
Hi Kevin,
I have a headlight available, so email me at goodpartsnz@gmail.com Cheers Simon
November 28th, 2012 at 8:25 pm
Hi I am after a CBR400RRK 1989 front wheel. Thanks, Gary
November 28th, 2012 at 10:20 pm
Hi Gary,
sorry but I cant help with a front wheel for that model currently. Cheers Simon
November 29th, 2012 at 5:33 pm
Thank you soooooo much for the tank for my baby (Honda CB400 Project Big !)!!!
It was perfect. Great condition and fits just right.
Now black instead of red (red goes faster tho) only to match.
My baby now feels like a new bike no rust no leaks.
Oh, note to self…. apparently fuel got into the sealant that had been put in the tank years ago, very porous, went boom when welding even after lit rag put inside tank to check.
Would really NOT recommend anyone put the sealant in their tanks.
Have great weekend
LIz
November 29th, 2012 at 10:44 pm
Thanks Liz, glad the tank was what you wanted. Not many of these around in the dismantlers either. Dont like the sound of the tank going boom when it was being welded at all! Hope the welder had a change of undies!
Cheers Simon
December 24th, 2012 at 7:37 pm
Hi, I’m looking for a side stand for an 06 YZFR6. Can you help?
December 24th, 2012 at 7:50 pm
Hi Richard. I have a complete sidestand assembly from an 05 R6 (USD Forks) but not sure if it will be the same as your 2006 model. If you email me at goodpartsnz@gmail.com I can then send you a photo to compare. Cheers Simon
December 28th, 2012 at 2:35 pm
Hey I was wondering if there was any 400 – 600cc engines with carb,starter motor, everything to make it run suitable for a go kart in stock?
December 28th, 2012 at 9:10 pm
Hi Jordan.
Thanks for your enquiry. I have a couple of options that might suit. The first is a 2004 Kawasaki ZZR600 engine package . This is a low mileage water cooled 4 cylinder engine and would come complete with engine, carbs, loom, electrics, radiator and headers @$1300.
I also have a Honda CB400T engine package. This is an air cooled twin cylinder engine in good running order. The package would come with engine, loom, electrics and headers @$800.
Both engines will need to be removed from a bike and I am currently on holiday, so wouldnt have these available for shipping for approx 2 weeks.
If you would like further details please email me at goodpartsnz@gmail.com
Cheers Simon
January 4th, 2013 at 11:37 am
hi i am trying to find some good condition kips exhaust valves for a 1994 kdx 200 do you have any or know where i can get some? thanks riki
January 4th, 2013 at 9:56 pm
Hi Riki,
sorry cant help there as I generally only deal on road bikes. Cheers Simon
January 4th, 2013 at 9:58 pm
do you have a indicator relay for cbr900rr 1999 the number on it is mitsuba fr-3303 and a price if you do have one? cheers buddy
January 4th, 2013 at 10:04 pm
Hi Darin,
yes I should have one of those in stock at $10 plus postage.
Email me at goodpartsnz@gmail.com directly.
Cheers
Simon
January 8th, 2013 at 9:50 pm
Hi, I’m looking for a rear rim for a rgv250. Do you have any available, if so how much. Cheers Sara sarahand@xtra.co.nz
January 8th, 2013 at 10:40 pm
Hi Sara,
I havent dismantled an RGV250 but may have a wheel from a parts lot I purchased from another dismantler. If you can email me at goodpartsnz@gmail.com and let me know what size the wheel is and if possible email me a photo. Cheers Simon
January 14th, 2013 at 8:32 am
HI there, i need an valve/rocker cover inspection cover for a GB400/500TT or like engine. they’re large disce like cap bolts, 17mm socket if i remember rightly and about 50mm in diameter. There are four of them on the head at the top end. Please could you email me at voodoochildatcov@hotmail.com Thanks!
Jo
January 14th, 2013 at 10:42 pm
Hi Jo,
I think I can help with thse so will email you directly. Cheers Simon
January 16th, 2013 at 4:53 pm
Hi, I am looking for a right hand mirror for a 1987 gsxr750f
rasaveda@gmail.com
Thanks
Jason
January 16th, 2013 at 9:55 pm
Sorry Jason cant help with that one. Cheers Simon
January 29th, 2013 at 9:46 am
Hi, I’m looking for a stator for a GN250. Please flick me an email.
January 30th, 2013 at 10:12 pm
Hi Byron. I have one available at $100 and will email you shortly. Cheers Simon
January 30th, 2013 at 10:49 am
Hi,
I’m looking for some NS250R parts if you have them (have an 86 model), looking for: rear brake fluid reservoir, rear brake disc, front and rear sprockets, radiator fluid overflow container\bottle, pistons in good condition, fuel cutoff valve switch.
Cheers
Terry
January 30th, 2013 at 10:16 pm
Hi Terry,
I think you have also contacted me through Trademe. I have a rear brake disc in good order at $80, but dont think I can help with any of the other parts you listed. Email me directly at goodpartsnz@gmail.com and I will see what I can find. Cheers Simon
February 5th, 2013 at 10:07 am
do you have any 1990 GS500E seats available and if so how much to counties honda , regards jim
February 5th, 2013 at 9:45 pm
Hi Jim,
yes I have a set in good order from a 1997 model which should be the same as your 1990 model far as I am aware. The seat is available at $100 plus postage (incl GST) which I would estimate at either $33.30 or $43.30 using tracked NZ Post. I would need to get it in a suitable carton first before confirming postage. If you email me directly at goodpartsnz@gmail.com I can send a photo and other details. Cheers Simon
February 5th, 2013 at 9:51 pm
Hi, I am after chain and front/rear sprockets for a 2001 Suzuki GSF 1200s please.
February 5th, 2013 at 9:57 pm
Hi Neil. Sorry cant help there. Cheers Simon
February 6th, 2013 at 7:45 am
Hi guys, i need 1987 suzuki gsx 400 e left side cover
February 6th, 2013 at 7:34 pm
Sorry only have a RH sidecover in stock currently. Cheers
February 7th, 2013 at 8:37 pm
Hi,
I’m in need of a clutch cable for a CBR750 (registered as a 1989)
Are you able to provide a price for one, including shipping?
I’m in Dunedin.
I’m also possibly after a front wheel guard if you have one.
Cheers,
Paul.
February 7th, 2013 at 10:23 pm
Hi Paul.
I havent dismantled a CBR750 as yet, but I have a clutch cable from an early CBR600F which may be the same. email me at goodpartsnz@gmail.com and I can send a photo. Cheers Simon
February 23rd, 2013 at 10:13 am
Hello, do you have a front tyre for an fxr150? 80/90 17. Thanks.
February 25th, 2013 at 9:44 pm
Hi Peter, sorry cant help with a tyre of that size. Cheers Simon
February 23rd, 2013 at 10:14 pm
Hi after a rear wheel for a cbr929
Thanks
February 25th, 2013 at 9:46 pm
Hi Nathan.
I have a 550×17 rear wheel from the earlier CBR900RR (1997-99) but not sure if they are the same. You can email me at goodpartsnz@gmail.com if you would like some photos. Cheers Simon
February 26th, 2013 at 5:07 pm
Hi, Im after chain buffer (rubber slider) for a k7 gsxr 1000 , cheers Ulli
February 26th, 2013 at 9:07 pm
Hi, thanks for your enquiry but sorry I dont have any GSXR1000 parts currently.
February 28th, 2013 at 4:45 pm
Hi Simon, I’m after the right hand switch block for a K6 Busa, but you said you have an identicle one, (except the brake switch plug), from a 98 TL1000 for $80. Sounds good. Done. What do I do next?
February 28th, 2013 at 10:39 pm
Hi Neil,
I will email you directly with a photo so can compare. Cheers Simon
March 5th, 2013 at 11:26 am
Hi, I’am looking for a pair for CBR 600 F3 forks.
Heres Hoping
Adrian
March 5th, 2013 at 9:28 pm
Sorry Adrian, cant help with that one. If you dont have any luck locally try the likes of Victorain Motorcycle Wreckers in Aussie. Freight is not expensive from there either. Cheers Simon
March 15th, 2013 at 6:32 pm
hi Simon , looking for the crome side cover for a ls650 savage that goes on the right side and has the tool bag and battery behind it . cheers nath
March 15th, 2013 at 9:14 pm
Hi Nathan,
sorry I have sold that cover from the LS650 I have dismantled.
Cheers
Simon
March 21st, 2013 at 7:15 pm
Greetings seeking price and availability of 2000 BMW R1100s Final drive complete with boot + driveshaft
April 12th, 2013 at 8:41 pm
Sorry Terry, no parts for that model in stock currently. Cheers Simon
April 12th, 2013 at 5:26 pm
Hi Simon….you recently had an 1100 virago being parted…..I have an ugly 750 and Im led to believe some of the parts are interchangable.Im after the grabrail, the left hand rear footpeg and mount…rear shocks….and generally the whole front end except front wheel which you dont have.oh yes and right front caliper,indicators.Ok cheers.
April 16th, 2013 at 4:40 pm
Hi Simon wondering if youve replied or not !
April 16th, 2013 at 8:16 pm
Hi.
Yes I did reply so not sure why you haven’t received it. The parts don’t look to be interchangeable and also the parts you mentioned were either damaged or have been sold, so sorry I cant help at this stage.
Cheers
Simon
April 13th, 2013 at 9:55 pm
hi looking for gsxr1000 k1/2 throttle bodies
April 14th, 2013 at 9:18 pm
Hi John. Sorry no GSXR1000 parts currently.
April 19th, 2013 at 11:31 pm
hi im looking for a magneto rotor for a gsxr 250
April 24th, 2013 at 6:38 am
Sorry not currently
April 22nd, 2013 at 9:13 pm
Hi there, I was wondering if you had any 93Yamaha yz125 parts or bikes?
April 24th, 2013 at 6:37 am
Hi Cody. Sorry can’t help with any parts for that model. Cheers Simon
May 3rd, 2013 at 3:57 pm
Hi… I am after a brake lever/master cylinder assembly for a 2006 Honda VTR250 Frame #: MC33-1102019.
Joe.
May 7th, 2013 at 10:06 pm
Hi Joe,
sorry cant help with that one currently. Cheers Simon
May 8th, 2013 at 8:58 pm
hi,
what parts do you have left from Honda CBR900 Fireblade SC33 1999
May 8th, 2013 at 11:19 pm
Hi Anthony, not a huge number of parts remaining but easier if you can tell me what parts your looking for. You can email me directly at goodpartsnz@gmail.com Cheers Simon
May 24th, 2013 at 2:27 pm
Hi there, was wondering if you’d happen to have an instrument set that would fit a 2004 Suzuki Bandit GSX250?
Cheers.
May 24th, 2013 at 7:13 pm
Sorry cant help with Bandit 250 instruments. Cheers
May 28th, 2013 at 11:54 am
Hey
After some parts for a 2002 suzuki gsx250
Front right hand handle bar end weight
Front right hand brake lever
Right hand side fairing (pref in blue with decals but open to options)
Possibly the front cowl
Thanks
Alan
May 28th, 2013 at 11:07 pm
Hi Alan,
sorry cant help with a bar end weight or brake lever. Aftermarket brake levers are cheap so look for a new one and you will also be able to get a pair of aftermarket bar end weights easily enough. Fairings for this model are no longer available new from Suzuki and they are becoming very hard to find second hand. If you have damaged fairings, they can genarally be repaired by a good plastic welder and then repainted. I dont have a RH panel in stock. I do have a front cowl but it would need plastic welding repairs. Cheers
May 29th, 2013 at 6:33 pm
Hey,
Need a RH footpeg hanger (which holds the peg and rear brake master) for a 06′ VTR1000F, can you help?
Cheers,
Pete.
May 29th, 2013 at 8:13 pm
Hi Pete, sorry cant help with any VTR1000 parts currently. Cheers Simon
May 30th, 2013 at 4:38 pm
Hi, Do you stock a DR 250 Djebel tank 1995, thanks
May 30th, 2013 at 10:45 pm
Sorry no
June 12th, 2013 at 3:55 pm
Hi there, do you have a clutch cover for a 2003 YZF-R1?
Cheers,
Nick
June 12th, 2013 at 10:17 pm
Hi Nick. Sorry cant help with that one. Cheers Simon
June 12th, 2013 at 9:50 pm
Looking for cbr 600 2009 parts. Not sure which years have the same stuff. But looking for engine cover right side plus lower fairing right side and other bits and pieces
June 12th, 2013 at 10:17 pm
Sorry no late model CBR600 parts in stock currently.
June 17th, 2013 at 11:59 am
Hi there, I’m just wondering what parts if any you have available for a gsxr600 k1. Bike has suffered a front end crash. Majority of the front is damaged and needs replacing excluding maybe the wheel itself. Also right handle bar snapped as well. Trying to decide if I’m going to fix it or not. Depends on cost of parts.
June 17th, 2013 at 10:48 pm
Hi Owen,
sorry cant help with any parts from that model other than engine parts and electrics etc.
June 24th, 2013 at 3:05 pm
Do u buy parts full front fairing plus headlights, clip ons, idicators etc for triumph daytona 955
June 24th, 2013 at 7:45 pm
Hi Muzz. Generally I only buy complete bikes, rather than just a few parts. You would get more for the fairings etc on the likes of Trademe. Cheers Simon
July 2nd, 2013 at 1:55 pm
Hey,looking for a oversized tank for a Honda cr250 06
Thanks
July 2nd, 2013 at 11:06 pm
Hi Richard. Sorry cant help with that one. Cheers Simon
July 8th, 2013 at 11:00 am
Hi, we have a CBR250R Aerosport MC17 looking for an ignition barrel assy with key, a fuel tank complete with key, lower cowl/fairing. The bike is black over charcoal.regards Shane
July 14th, 2013 at 4:14 pm
Hi Shane, sorry for the late response as I thought I had answered this previously. None of those parts in stock currently and they are becoming quite hard to come by. Cheers Simon
July 13th, 2013 at 7:41 pm
Hi what engine parts would you have for a 1984 KR250, looking for pistons, inlet disk valves
Regards Garth
July 14th, 2013 at 4:17 pm
Hi Garth. I have very few engine parts remaining for this model but should have a pair of the inlet disc valves in stock. Email me directly at goodpartsnz@gmail.com and I will check them out and email you photos. Cheers Simon
July 16th, 2013 at 1:47 am
Hi ya Simon..Im after a few parts for my gsxr400r 1989. plus got a few question aswell so if it possable if you can give me a call.0279627510..As i dont have a email address and usin a friend computer.my name is Murray. THANKS
July 22nd, 2013 at 10:49 pm
Hi Murray. have sent you a txt. Cheers Simon
August 2nd, 2013 at 12:41 pm
Hi guys, i am restoring a 77 Suzi B120 and wondering if you could help with the headlight bracket surrounds, LH frame cover, and RH Switchgear, Kind Regards Cameron
August 4th, 2013 at 8:56 pm
Hi Cameron. I do have a few parts for the old B120 and they are getting hard to come by these days. From what I can see there were a number of variants to the B120 model, but if you email me directly, at goodpartsnz@gmail.com I will be able to email some photos so you can see if my parts will suit your model. Cheers Simon
August 3rd, 2013 at 5:31 pm
Hi I’m looking for an r6 2001 starter motor.. Do u have any?
August 4th, 2013 at 6:42 pm
Sorry cant help with that one currently.
August 8th, 2013 at 3:50 pm
hi mate. I looking for a clutch perch and switch for an 08 cbr 600rr.
August 8th, 2013 at 9:33 pm
Sorry cant help with that one. Cheers Simon
August 11th, 2013 at 9:54 am
Hi Simon. Its Murray.Sorry its been a couple days to get back to you.my parts list for my Gsxr400r are……Front seat,Rear seat,rear foot pegs, pair mirrors, Front indercaters, seat and ( or ) tank backet , Starter relay, tank and ignition lock, muffler bracket, speedo, carbie clamp ( Hose clamp lookin thingie )…….Plus a fairing kit. With the fairings It dosnt have to be that year ( 1989 ) as i was plannin on up grading to a later year fairing kit anyway, if it ralitivly easy to do. Also i dont mind at all with the parts that im after if they different year or even make of bike along as i can get it to work.If ya can help me out it would be great.Thanks.
August 12th, 2013 at 8:58 pm
Hi Simon,
Do you still have the GSX250’s? I’m now looking for a speedo drive unit. I think that it might be a generic Suzuki part so perhaps a different model might also fit?
Thanks,
Tony
August 12th, 2013 at 9:11 pm
Hi Tony,
is this for the GSX250 Invader? I do have one available at $40. You can email me directly at goodpartsnz@gmail.com Cheers Simon
August 23rd, 2013 at 10:23 pm
G’day, looking for a front brake light switch for a BMW R1100GS. Can you help?
Thanks,
Matt
August 25th, 2013 at 9:58 pm
Thanks for your enquiry Matt but sorry I cant help with any parts for that model. Cheers Simon
September 1st, 2013 at 12:48 am
1987 GB400TT – looking for helmet holder/lock/seat lock. Saw you may have GB500 in stock – are parts compatible? Also any clean headlight buckets, no pitting. Speedo and tacho housings – clean with firm chrome. Let me know. Thanks Eric from Oz.
September 1st, 2013 at 8:27 pm
Hi Eric,
cant help with a headlight bucket or the instrument housings (probably best to see if you can get those new from Honda), but I may be able to help with a seat seat lock/helmet holder. The 400 and 500 are identical but I think I have a seat lock still attached to a 400 frame (I have dismantled both). I can check this out early this week and let you know. If your interested, please email me directy at goodpartsnz@gmail.com Cheers Simon
September 17th, 2013 at 4:11 am
looking for a complete rf900 engine
September 17th, 2013 at 4:11 am
looking for a complete suzuki rf900 engine
September 17th, 2013 at 10:50 pm
Hi Kenley.
I dont currently have one in stock, but may be getting one in very shortly. Email directly at goodpartsnz@gmail.com and let me know what you require. Cheers Simon
September 24th, 2013 at 3:44 pm
Hi there looking for a aftermarket muffler for my 1997 gsf1200s bandit cheers
September 24th, 2013 at 10:49 pm
Hi Chris, sorry cant help with a suitable muffler currently. Cheers Simon
September 30th, 2013 at 2:21 pm
Hi there Simon, I’m after a front mudguard for a ’97 gsxr 1100w, with shipping to Auckland, can u help??
September 30th, 2013 at 7:26 pm
Hi Dan, sorry but the ones I had in stock have sold. Cheers Simon
October 1st, 2013 at 9:43 pm
Hay I’m after a aultanator cover and left hand mirror and the bracket that holds the gear leaver /foot peg for a 2000 gsxr 750
October 1st, 2013 at 9:51 pm
Hi Brendon,
sorry cant help with parts for that model currently. Cheers Simon
October 3rd, 2013 at 5:07 pm
Hi Simon, do you have a RHS headlight bracket for a 87 GB400TT? A single seat? I know that is a long shot!
October 3rd, 2013 at 8:55 pm
Hi Bruce,
sorry cant help with either of those currently. Cheers Simon
October 5th, 2013 at 3:54 pm
Thanks Simon, I also need the clamp side of the handlebar perch for the master cylinder, the holes are at 33mm crs and the bars are standard 22mm. I suspect a lot of Honda perches might be interchangeable. Also do you have any aftermarket stuff, bar end mirrors, headlight brackets? 022 398 3651. Cheers Bruce
I need the perch for my WOF, happy to come and look and pickup.
October 7th, 2013 at 8:55 pm
Hi Bruce. I have a handlebar clamp that will fit your master cylinder. It wont be the correct type but it will certainly do the trick. Sorry cant help with any of the aftermarket bits you mentioned. I will send you a txt tomorrow. Cheers Simon
October 10th, 2013 at 8:46 pm
Do you have a neatral switch for a 97 RF900. Thanks.
October 10th, 2013 at 8:56 pm
Hi Nik,
I dont have one from the RF900 but should have one from a 1999 GSXR1100W which is likely the same. heading away for a few days, so email me at goodpartsnz@gmail.com and I will get back to you later next week. Cheers Simon
October 14th, 2013 at 5:10 pm
Roy crooks.do you have parts for honda cg 110, ie wiring, carburater etc.? Cheers
October 15th, 2013 at 10:18 am
Hi Roy,
sorry cant help with those.
October 17th, 2013 at 8:49 am
I need a thermoswitch (controls the cooling fan) for a 1988 Suzuki Intruder (vs 700). Any chance you have one?
I also need some other bits and pieces. Are you located in Chch?
Cheers
Jeff
October 17th, 2013 at 9:41 pm
Hi Jef, I may have the temp sender unit. If you email me directly at goodpartsnz@gmail.com I can send a photo to ensure its the part you require. I am located in Loburn a few kms out of Rangiora, but my parts business is operated from home on a part time basis (I work fulltime elsewhere), so email is the best method of communication and I have a photo inventory of parts. Cheers Simon
October 19th, 2013 at 6:57 pm
Hi, just wondered if you have any aftermarket stuff for a 91 gsxr 1100? Ie: exhaust, seat cowels…….anything really. Thanks in advance. Glenn
October 20th, 2013 at 9:25 pm
Hi Glenn,
sorry nothing available currently. Cheers Simon
October 23rd, 2013 at 8:59 pm
hi do u have two indicator setups for an 1984 xl250r and price please if possible thanks very much and they are for the rear of the bike cheers
October 23rd, 2013 at 9:06 pm
Hi Scott,
sorry cant help with those as I mainly stock road model parts. Cheers Simon
November 5th, 2013 at 12:44 pm
hi
can i get ns 250 r mc11 spares list what u got?
kumar from india.
November 5th, 2013 at 9:46 pm
Hi Kumar.
it would be easier if I knew what parts you needed and I can then send photos of each part it I have it in stock. You can email me directly at goodpartsnz@gmail.com Cheers Simon
November 17th, 2013 at 11:58 pm
hi there,
unfortunately i miss ur mail. please send again to mail id. hassinii@gmail.com
I had already sent my requirements clearly to ur mail from my mail id. i had attached some pics to.
1.cdi unit including the bigger one and for the both barrels.
2.coil plate which is mounted inside the magnet
3.Clutch assy
4.Crank assy
5.stock barrels
November 5th, 2013 at 4:13 pm
I’m after a front wheel rim for a 97 suzuki bandit 250. Cheers
November 5th, 2013 at 9:49 pm
Hi Jimmy,
yes I have a front wheel in very tidy order at $200. You can email me at goodpartsnz@gmail.com for more details. Cheers Simon
November 11th, 2013 at 11:44 pm
do you have fairing set for zz-r 250 1992
November 12th, 2013 at 9:02 pm
Sory Paul cant help with a ZZR250 fairing currently. Cheers Simon
November 17th, 2013 at 9:07 pm
Hi guys,
I’m looking for a Starter Relay Part No. 20P-H1940-00 for my Yamaha R15 2011. Could you please check and see if you’ve got one of these available? And what’s the cost on it?
Cheers,
Umar
November 17th, 2013 at 9:17 pm
Hi Umar,
I have a solenoid from a yamaha Scorpio that may be the same. email me directly at goodpartsnz@gmail.com and I can send a photo for you to compare. Cheers Simon
November 18th, 2013 at 1:24 am
very good response and appreciate it myself. good work guys…all the best to you..
November 18th, 2013 at 6:01 am
Hai,
I’m looking for some yamaha rd125lc ypvs parts (have an 86 model), looking for: cylinder kit, cdi unit, power valve system ignition coil etc.
Thanks
Lawrence
November 18th, 2013 at 9:48 pm
Hi Lawrence, thanks for your enquiry but sorry nothing in stock for that model. Cheers Simon
November 21st, 2013 at 12:32 am
hi..
This is kumar once again im asking about honda ns250r mc11 electrical parts . sorry i missed ur mail due to my mobile corrupt..pls send again ur parts pics and price list. i would like to know price list is in us dollars or sing dollars? cdi unit, ignition coil both,barrels both.
November 21st, 2013 at 10:19 pm
hey mate im looking for a rear master cylinder for a yamaha dirt bike would you have anything in stock ? yzf 250-450 2003-14 you can contact me on 0278420294 thanks shaun
November 21st, 2013 at 10:23 pm
Sorry Shaun, I only deal in road models. Cheers Simon
November 22nd, 2013 at 9:02 pm
hi simon
please reply about ns250r mc11 cdi unit and coilplate sets both barrels.
December 4th, 2013 at 7:33 pm
HEY MATE IM AFTER AN IGNITION KEY TUMBER FOR A 97 TRIUMPH TRIDENT 900. DO U HAVE ONE OR COULD U POINT ME IN THE RIGHT DIRECTION. CHEERS
December 4th, 2013 at 8:46 pm
Hi Evan. Sorry cant help as I dont have any Triumph parts. Try one opf the larger dismantlers in the North Island or could even be worth checking out Ebay. Cheers Simon
December 6th, 2013 at 9:35 pm
hey simon,just wondering if you would happen to have a LS650 savage camshaft,or know of someone with one or damged motor,have emailed you also,cheers
December 8th, 2013 at 3:43 pm
got ur email,cheers
December 15th, 2013 at 9:55 pm
I’m after a speedo drive for a GB400. I can’t seem to find one? Do you have one or know of an alternative?
Cheers
December 16th, 2013 at 9:05 pm
Sorry Matt I have sold all mine as well. They seem to be a sought after item. Unfortunately I dont know if other models are compatable as I would need to have one to compare.
Cheers Simon
January 13th, 2014 at 5:41 pm
Hi, I’m after a front left indicator for a Ducati Monster 900. Do you have one? How much and can I come and have a look please? Thanks.
January 13th, 2014 at 11:09 pm
Hi Leo, sorry no Ducati indicators in stock. Cheers
January 17th, 2014 at 9:29 pm
Hi there any speedo cables for 2001 900ss ducati please
January 17th, 2014 at 10:39 pm
Hi Rueben,
the closest thing I have is a speedo cable from a 1997 Monster 600. Dont know if that would fit ot not sorry.
January 19th, 2014 at 9:47 am
Hi Im after a Starter relay for 1998 Apilia Pegaso- Its a Hitachi MS5D-191. or a Yamaha 4KD-81940-00-00 ,Yamaha 4DN-81940-00-00 fits as well.
Thanks Don
January 19th, 2014 at 11:37 am
after a Honda Gb500 1989 R/F indicator. Gb 400 may be the same
Cheers
marty
January 19th, 2014 at 8:36 pm
Hi Marty,
I checked out the thread on an Aprilia forum regarding the solenoids and the one they use seems to have been fitted to a number of older model Yamahas. I should be able to help. If you email me directly at goodpartsnz@gmail.com I can provide further details. Cheers Simon
January 19th, 2014 at 8:37 pm
Hi Marty,
Sorry cant help there as I have sold all mine currently.
February 3rd, 2014 at 6:36 pm
hi,
Im looking for the reap bracket that carries the right footpeg and muffler. the bike is Kawasaki zx10R 2005
cheers,
Saif
February 3rd, 2014 at 10:06 pm
Sorry Saif, nothing in stock for that model currently. Cheers Simon
February 3rd, 2014 at 8:57 pm
hi, wondering if you have any parts for a 2003 Suzuki sv650s . looking for some
February 3rd, 2014 at 10:04 pm
Sorry Stuart, I do have p[arts for a 1999 SV650 in stock, but they wiull mostly difefr from the 2003 model.I do have a 2004 SV1000 in stock and some of those parts may be interchangeable. You can email me directly at goodpartsnz@gmail.com Cheers Simon
February 7th, 2014 at 9:49 am
Hi.
Do you have a headlamp for a VL250.
cheers
February 8th, 2014 at 9:38 pm
Sorry no
February 7th, 2014 at 12:47 pm
Hello , just wondering if you had any quad parts for sale, if you could get back to me , Thad be great , thanks
February 7th, 2014 at 9:46 pm
Hi Henry.
Sorry I dont deal in quads or off road models. Cheers Simon
February 13th, 2014 at 9:08 pm
hey there just wondering if you have gs500e 91 gas tank in stock?
February 13th, 2014 at 10:17 pm
Sorry cant help with that one. Cheers Simon
February 18th, 2014 at 8:13 pm
after a gsx250 across motor 1990, do you have one?
February 18th, 2014 at 10:24 pm
Sorry no. Sold my last one a couple of weeks back. Cheers
February 19th, 2014 at 12:45 pm
Are the front fork brackets ,(christmas tree)and neck shaft interchangable from 88 suzuki intruder VS 800 to an 87 suzuki intruder VS 1400?
February 19th, 2014 at 10:49 pm
Hi Fred,
I am not sure sorry but I do know many of the 1400 parts are not interchangeable with the VS700/750. I do have a complete tripl tree from an 89 VS750 in stock, so email me directly at goodpartsnz@gmail.com and I can send photos and we can compare some dimensions if that helps. Cheers Simon
February 26th, 2014 at 11:41 am
Hi, After a rear brake drum “Cam” the part that pivots and pushes the shoes apart, the arm and the Linkage rod to the pedal, for an XZ400.
February 26th, 2014 at 10:18 pm
Hi. I can supply the splined cam and probably the brake arm, but not sure on the linkage rod. email directly at goodpartsnz@gmail.com and I will see what I can do.
March 2nd, 2014 at 12:48 pm
hey there im after parts for 1983 gs 550 needing side cover the side that covers the batt looking from the back its the left hand side anychance you guys would have something that would fit my e-mails brad_paul_swindale@hotmail.com would love to hear from yas
March 2nd, 2014 at 9:39 pm
Hi Brad, sorry no sidecovers for the GS550 in stock. Cheers Simon
March 3rd, 2014 at 3:12 pm
Hey im after a gearbox for gsxr750. Cheers
March 3rd, 2014 at 7:31 pm
Sorry cant help with that one currently.
March 14th, 2014 at 2:42 pm
Hi, Triumph trident tail light lense (1975)
March 15th, 2014 at 8:46 pm
Sorry no Triumph parts curently
March 20th, 2014 at 10:33 am
hi there after a complete engine round about 1000cc to put in an off road buggy any make….
March 20th, 2014 at 2:06 pm
Hi i am urgently after some 91 fzr 250 3ln fairings, i need the left hand side fairing and the front fairing. Can you help.
Regards
Shane
March 20th, 2014 at 9:01 pm
Hi Shane,
Sorry cant help with any FZR250 3LN fairings at all. It might be worth looking at one of the Chinese complete fairing sets as they are very reasonably priced. Cheers Simon
March 22nd, 2014 at 5:09 pm
hi, im looking for a left foot peg for a k4 GSXR 1000
kind regards
March 23rd, 2014 at 7:47 pm
Sorry no parts for that model in stock currently
March 25th, 2014 at 4:42 pm
Hello I recently built a trike using a Harley Rocker dona and feel it needs 1 or two steering dampers to steedy it, so do you have anything that will work, even if i have to make some mounts or brackets
and of course how much, thank you Dennis
March 25th, 2014 at 9:32 pm
Sorry Dennis I dont have any steering dampers in stock. Cheers Simon
March 29th, 2014 at 5:53 pm
Hi there do you have any complete engine for a 2007-2014 CBR600RR?Cheers
March 30th, 2014 at 8:11 pm
Sorry cant help with parts for that model.
March 29th, 2014 at 7:28 pm
honda vt250 right side exhaust pipe
March 30th, 2014 at 8:12 pm
Sorry Craig cant help . You would be best to look for a cheap pair of aftermarket mufflers. Cheers Simon
March 30th, 2014 at 8:05 pm
Hi, have you got any 1995 cb400sf parts? Cheers
March 30th, 2014 at 8:15 pm
Hi Aden. I have dismantled one of these some time ago but dont have many parts left. What were you looking for. Thanks Simon
April 1st, 2014 at 9:51 pm
Hi do you have any fairings for a gsx250 invader 04 and a rear shock
Cheers
April 2nd, 2014 at 9:18 pm
Hi Jason,
sorry cant help with fairings, but I can supply a rear shock in good order from a bike with under 6000km on the clock at $150. You can email me directly at goodpartsnz@gmail.com if you would like more details. Cheers Simon
April 7th, 2014 at 5:53 pm
Looking for rh front indicator assembly for dl650 Suzuki vstrom…2004 model
Orange lens
0274368288
April 7th, 2014 at 7:58 pm
Hi Dave, sorry nothing suitable in stock currently.
April 7th, 2014 at 9:15 pm
Good evening,
I am trying to track down an oil/water pump for a K100RS1991 – cheers, cooldudepark@hotmail.com (Wanganui)
April 7th, 2014 at 10:23 pm
Sorry cant help with that one. Try a Google search and you may find something on the likes of Ebay. Cheers
April 16th, 2014 at 2:30 pm
hi do you have a complete rear shock for a 1991 gsxr 250cc?
thanks
April 16th, 2014 at 9:53 pm
Hi Craig,
the rear shock is the same on all GJ72 model GSXR250’s from 87-91. As long as your bike isnt a GSXR250R (alloy frame) as they are different. I can supply a rear shock at $120. You can email me at goodpartsnz@gmail.com for more details. Cheers
April 19th, 2014 at 10:10 pm
I am looking for rear disc rotor for a Kawasaki zzr 600 1991
April 22nd, 2014 at 8:16 pm
Hi Paul,
I have a rear disc in very good order from a 2004 ZZR600 and it looks to be identical to the earlier model discs. The disc is available at $80 so email me at goodpartsnz@gmail.com and I can supply further details. Cheers Simon
April 24th, 2014 at 4:51 pm
hi,
are you also buying used bikes? if yes would you be interested in my honda xr 400 r from 1997 which has run 19000 k ?
cheers florian
April 24th, 2014 at 8:03 pm
HI Florian,
thanks for the offer but I only deal in road models. I suggest you list it on the likes of Trademe as it should sel easily. Cheers Simon
April 28th, 2014 at 4:05 pm
Hi, I am seeking any parts or whole bike Suzuki B105P 1967-68, just thought I would ask, you never know till you do……….thanks
April 28th, 2014 at 10:31 pm
Sorry cant help with parts for that model. neat looking little bikes though 🙂
May 16th, 2014 at 5:11 pm
Hi, I am looking for a set of wheels for a Kawasaki GT750, may look at the GPZ750/1100 wheels that are the same design? Thankyou.
May 16th, 2014 at 8:22 pm
Hi Kelvin,
The GPZ wheels are quite difefrent.
I have a 185×19 front wheel that looks to be the same as that used on the GT750. I also have a 215×18 rear wheel with the same spoke pattern, but its a chain drive wheel not shaft drive like the GT750. If you email me at goodpartsnz@gmail.com I can send you photos. Cheers Simon
May 16th, 2014 at 5:22 pm
Hi do you have any ex250j parts im after two socket head lamps?
May 16th, 2014 at 8:24 pm
Hi Shaun,
Not quite sure what you require . I do have a complete headlight assembly for the EX250 if thats what you require. You can email me at goodpartsnz@gmail.copm for more details. Cheers Simon
May 23rd, 2014 at 1:15 pm
hi im modifying a nighthawk into a bobber and i need lots of things. seat/ tail light/ 290mm-280mm stif rear springs/ rear fender. and more is there any chance i can go for a look at what you have?
May 23rd, 2014 at 7:09 pm
Hi Mark,
I am not set up for customers to browse, but if you email me at goodpartsnz@gmail.com and give me an idea of the parts you require, I can then email photos if I have something that may suit in stock. If there are parts that you would then like to view, I will get them out into my workshop for you to view at an agreed time. Cheers Simon
May 24th, 2014 at 11:03 pm
Hi Mark. I am not set up for customers to browse. Thye best option is to email me at goodpartsnz@gmail.com and let me know some parts your looking for. If I have anything suitable in stock I will email you photos plus prices etc and if you then wish to view particular parts I can get them into my workshop for viewing at an agreed time. Cheers Simon
May 24th, 2014 at 5:50 pm
Hi im just wondering if you have any Suzuki GSX400X impulse motors. Thanks Carl.
May 24th, 2014 at 11:00 pm
Hi Carl,
I think you may also have asked this on one of my Trademe auctions. I have an engine still in a bike that was to be used as a trackbike but the owner changed his mind. Email me directly at goodpartsnz@gmail.com and I can provide more details. Cheers Simon
June 3rd, 2014 at 3:28 pm
hi simon
could you let me know a price on a radiator fan for a 1991 suzuki gsxr 250
thanks
craig
June 16th, 2014 at 10:33 pm
Hi,I’m after a 1982 Suzuki gs1100gk generator,can you help?
Thanks
Wiz
0274357545 chch
June 16th, 2014 at 10:48 pm
Hi Wiz,
I have a stator and rotor from a 1979 GS750 but dont know if its the same as the 1100. You can email me at goodpartsnz@gmail.com and I can send photos. Chers Simon
June 23rd, 2014 at 12:39 pm
Do you have a rear wheel rim included for honda scotter today 50cc. If yes please email pricing. Thanks kevin
June 23rd, 2014 at 8:02 pm
Sorry Kevin, I dont deal in scooter parts. Cheers Simon
June 25th, 2014 at 12:09 pm
hi
do you have the follwing parts available for a yamaha vmx1200 vmax ;
clutch lever
left foot peg
left side air scoop
gear change lever
June 26th, 2014 at 9:35 pm
Hi Quentin,
sorry cant help with those. Cheers Simon
June 28th, 2014 at 8:38 pm
i need a zxr kavasaki 250 1990 engine
June 29th, 2014 at 7:56 pm
Hi Ivan,
I have an engine from a 1993 ZXR250C in stock. If yours is the A model, I think the C model engine will bolt straight in. You can email me at goodpartsnz@gmail.com
June 29th, 2014 at 6:00 pm
Hi Simon
I’m looking for two plastic panel pins for a Honda Blackbird although I’m sure most other models use the same pins. Hope you can help.
Cheers
Dave
June 29th, 2014 at 8:06 pm
Hi Dave,
Dont think I can help with those. I generally dont keep the plastc pins. They should be available new through a Honda agent and wouldnt be expensive. Cheers Simon
June 30th, 2014 at 5:59 pm
I guess $6 per pin for a genuine Honda part is OK 😦
July 4th, 2014 at 7:49 pm
Hi
Would you have a muffler for a 2007 yamaha scorpio please?
July 16th, 2014 at 8:08 pm
Sorry no
July 7th, 2014 at 6:35 pm
hi would you have exhust for 1980 cb 750
July 16th, 2014 at 8:08 pm
Hi Charlie,
sorry for the late reply. Unfortunately nothing in stock currently. Cheers Simon
July 16th, 2014 at 3:07 am
buen dia amigo, estoy adaptando un cdi carmo modelo 131800-0240 a una kawusaki zx10 pero no he podido hacerlo, puesto que no encuetro los cables que van desde la captadora hasta el cdi, me podrias ayudar a decifrar este paso. gracias
July 16th, 2014 at 8:06 pm
Sorry no ZX10 parts in stock
July 17th, 2014 at 6:36 pm
89 yamaha fzr250, 3ln plastic cover behind riders seat and a brake lever
July 17th, 2014 at 8:43 pm
Sorry cant help with those.
August 7th, 2014 at 1:43 pm
Hi there i messaged you on trade me about frz250 2kr carbs and inlet rubbers do you have a contact number that I can get ahold of you.
Cheers stu
August 7th, 2014 at 1:46 pm
Hi there i messaged you on trade me about fzr250 2kr carbs and inlet rubbers do you have a contact number to get ahold of you on.
August 7th, 2014 at 7:18 pm
Hi Stu,
please email me directly at goodpartsnz@gmail.com My business is operated part time and email is the preferred method of contact. Thanks Simon
August 11th, 2014 at 7:39 pm
I am looking for the Magneto rotor assembly afor a 2007 Suzuki sv 1000
August 11th, 2014 at 8:02 pm
Hi Tristen. Sorry cant help with that one currently.
August 13th, 2014 at 12:39 pm
Hi, I am looking for an exhaust can from a k1 or K2 GSXR 1000
August 13th, 2014 at 10:24 pm
Sorry Roddy, cant help with that one. Cheers Simon
August 15th, 2014 at 9:19 pm
HI, I am looking for a 1985 kawasaki gpz 600 fairing, (the main top bit)???
August 15th, 2014 at 11:00 pm
Sorry no parts for that model in stock currently.
September 8th, 2014 at 10:22 am
Hi, do you have a heat controller and cable for Oxford hot grips. ???? cheers,
September 11th, 2014 at 1:47 pm
Hi. I need a headlight and mounting kit for a suzuki gsx1400 2007. Also do u have any aftermarket mufflers for the same bike
September 11th, 2014 at 10:32 pm
See above
September 11th, 2014 at 1:48 pm
Hi. I need a headlight and mounting kit for a suzuki gsx1400 2007. Also do u have any aftermarket muffle rs for the same bike
September 11th, 2014 at 10:31 pm
Hi Chris,
cant help with a headlight sorry. I have a Yoshi Tri-Oval muffler from an 07 GSX1400. Its been squashed a bit where the band goes around it, but when its mounted the band covers this up mostly. If you email me at goodpartsnz@gmail.com I can send photos. Cheers Simon
September 12th, 2014 at 1:19 pm
Hi do you have chains, Break pads and a speedo cable fo a hyosung gt250?
September 12th, 2014 at 10:27 pm
Sorry Henry, cant help with any of those. Cheers Simon
September 18th, 2014 at 5:22 pm
Hi, looking for front and rear discs for a 2001 suzuki gsx250. cant belive the price of them new…. Any chance you’d have a legal set. Need them for warrant.
Many thanks
Bryan Craig
September 18th, 2014 at 9:39 pm
Hi Bryan. I have a pair of discs and have emailed you directly. Cheers Simon
September 18th, 2014 at 5:50 pm
hi there, im after a pair of front brake calipers for a 2003/4/5 Yamaha r6.??
chees jon
September 18th, 2014 at 9:38 pm
Hi Jon, I have a pair of USD fork calipers from a 2005 R6 in good order. If these are the type you require, please email me at goodpartsnz@gmail.com and I can provide more details including a photo. Chers Simon
September 18th, 2014 at 10:14 pm
Hi I am after a 83 bmw r65 clutch friction plate? If you have any in stick. Cheers
September 18th, 2014 at 10:23 pm
Sorry Troy, no parts for that model in stock.
September 19th, 2014 at 12:01 pm
Hi, Do you have any mufflers from a GSR 750 2000-2004? will be stamped x35f0x
September 19th, 2014 at 12:01 pm
sorry meant GSX-R 750
September 19th, 2014 at 8:40 pm
Sorry cant help with any parts for that model. Cheers Simon
September 29th, 2014 at 4:41 pm
Hi, I looking for a fuel tank and rear trim panel for a Honda CB 900 Hornet 2005
Please could you let me know if you have stock.
Thank you
Wayne
September 29th, 2014 at 9:15 pm
Sorry Wayne,
no parts for that model in stock currently. Cheers Simon
September 30th, 2014 at 5:45 am
Need the foot peg /shifter bracket for 93 fj 1200
October 5th, 2014 at 9:36 pm
Sorry Jeff, no parts for that model in stock currently.
October 22nd, 2014 at 4:04 am
hi, do you have yamaha rd350b parts
October 22nd, 2014 at 9:04 pm
Hi. I only have the odd part from the RD350. You can email me on goodpartsnz@gmail.com and let me know what parts you are looking for.
October 30th, 2014 at 11:46 am
Hi, would you happen to have a speedo drive unit and cable for a Honda CBR1000FH 1987
October 30th, 2014 at 6:50 pm
Hi Robbie,
yes I have just dismantled an 87 model and have a speedo drive unit available at $45. You can email me directly at goodpartsnz@gmail.com for more details. Cheers Simon
November 4th, 2014 at 10:24 am
Hi Simon,
On the hunt for a set of front forks for an 87 GSX400X impulse, would you have any and what condition/price?
Kind Regards Cameron
November 4th, 2014 at 9:41 pm
Hi Cameron. I should have a tidy pair available and can check for you. Please email me directly at goodpartsnz@gmail.com and I can provide more details including photos. Cheers Simon
November 16th, 2014 at 8:40 pm
Hi im looking for a stator and a flywheel for a 96 suzuki rmx250
November 16th, 2014 at 9:07 pm
Sorry cant help with that one Kieran. Cheers Simon
November 27th, 2014 at 9:38 pm
hi I looking for a front rim off a vfr400 nc30 u got anything
November 27th, 2014 at 10:39 pm
Sorry cant help with that one Andrew. Cheers Simon
November 29th, 2014 at 10:14 pm
Hi there do u have left hand indicator for a cbr900 rr fireblade 1995 cheers
December 15th, 2014 at 8:57 pm
Hi Michele. I have a couple of indicators from a 1999 Fireblade. If you email me directly at goodpartsnz@gmail.com I can email a photo. Cheers Simon
December 15th, 2014 at 5:12 pm
Looking for upper cowl and right side cowl access door for 1987-90 Honda CBR/Hurricane 600.
Thanks, Jim
December 15th, 2014 at 6:34 pm
Sorry cant help with that one Jim. Cheers Simon
December 16th, 2014 at 5:23 am
Ok. Thank you for your time.
December 19th, 2014 at 2:17 pm
Hi, did you have a set of headers and/or front brake master cylinder for a 1991 Kawasaki ZXR250C? Cheers
December 19th, 2014 at 10:32 pm
Hi Campbell. Yes I can supply a set of header pipes for the ZXR250C at $100 and also a complete front brake master cylinder assembly including brake lever, fluid reservoir and brake switch all in good order, at $150. If you email me directly at goodpartsnz@gmail.com I can supply photos and further details. Cheers Simon
December 21st, 2014 at 4:20 pm
Hi mate im after a 2002 RM 250 primary drive gear bolt cheers
December 23rd, 2014 at 8:24 pm
Hi Scott,
sorry no parts for that model in stock. Cheers Simon
December 23rd, 2014 at 1:39 pm
Hi, I have a xingyue 150 that I’m trying to get rid of. It went last summer butt I think battery is flat. It is missing it mirrors an a few bolts.
Would you take on such a bike?
Cheers
Leon
December 23rd, 2014 at 8:28 pm
Hi Leon,
sorry but its not really something I would buyt as demand for parts would be very limited. Try listing it for sale on Trademe as-is. Cheers Simon
December 27th, 2014 at 11:40 am
Hi I heard you may be wrecking a VFR 750 1990 im after a the rear wheel can you help?
Cheers Phill
December 27th, 2014 at 4:58 pm
Hi Phil, I have dismantled a 1994 model and have a 1990 model coming in shortly. If you email me directly at goodpartsnz@gmail.com I can supply details on the rear wheels.
Cheers Simon
January 6th, 2015 at 9:00 pm
Hi I’m after a exaust system and a fork brace of a honda firestorm . Thanks
Steve
January 19th, 2015 at 12:50 pm
Hi Steve. Sorry for the late reply as I missed your question for some reason. I only have the factory headers for the VTR1000 (no mufflers etc) and sorry no fork brace. Cheers Simon
January 19th, 2015 at 12:03 pm
Hi do you have a CDI unit for aCBX250RS 1986
thanks
January 19th, 2015 at 12:51 pm
Hi Paul. Yes I can supply a CBX250RS CDI at $80. You can email me directly at goodpartsnz@gmail.com for more details. Cheers Simon
January 19th, 2015 at 6:54 pm
Thanks for the reply. I was looking at making a single exaust for my firestorm and didn’t want to chop up my originals . Not to worry about the mufflers . How much for the headers please sent to Central otago.
Thanks steve
On Monday, January 19, 2015, Good Parts Motorcycle Dismantlers wrote:
> paul watson commented: “Hi do you have a CDI unit for aCBX250RS 1986 > thanks”
January 19th, 2015 at 8:47 pm
Hi Steve. Sounds perfect. The headers are available at $100 plus postage. email me directly at goodpartsnz@gmail.com and I can email a photo and provide further details. Cheers Simon
January 31st, 2015 at 3:40 pm
Hi,
I am looking for a Stator and flywheel for a 1989 Suzuki GSXR250R.
I have had difficulty in the past being provided the wrong parts from motorbike shops as there are a few models. They are unable to source the correct parts but they have provided me with the details I need to pass on.
VIN: 7A8GK0N1104105553
FRAME: GJ73A-105553
SUZUKI GSXR250R
It would be great if you could quote me on whichever parts if you have them in stock.
Kind Regards,
David Court
0220899772
January 31st, 2015 at 3:43 pm
Please also reply to me directly at davidcourt89@gmail.com
January 31st, 2015 at 8:27 pm
All done.
January 31st, 2015 at 8:27 pm
Sorry cant help with those David. not an easy model to get parts for from what I understand. Cheers Simon
February 11th, 2015 at 10:27 pm
Hi
I need a 9 pin flasher unit for my 2004 honda cb 400ss.
Can you help??
Thanks
Leigh
February 12th, 2015 at 6:41 pm
Hi Leigh,
dont think I can help there. I have never seen a 9 pin indicator relay (flasher unit) before. Are you sure the flasher unit is 9-pin?
If you email me a photo to goodpartsnz@gmail.com I will see if I can help. Cheers Simon
February 18th, 2015 at 3:59 pm
hi mate im looking for a cdi unit for a 2003 gz250 and lead
February 18th, 2015 at 9:25 pm
Hi Sam,
I dont have one from a GZ250 but I do have a CDI from a GN250 which should do the trick. The GZ engine is essentially the same as the GN250. if you email me directly at goodpartsnz@gmail.com I can email photos for you to compare the wiring plug etc. Cheers Simon
February 24th, 2015 at 9:56 pm
Gday,
I’m after the push and pull throttle cables off a honda VFR 400 R 1988.
Any of them lying around?
cheers,
Jarrod
February 25th, 2015 at 5:55 pm
Hi Jarrod,
I should have a pair for the NC24 but not sure if your bike is the NC24 or NC30. Engine on NC30 is very different but dont know about throttle cables. If you email me at goodpartsnz@gmail.com I can send photos. Cheers Simon
March 2nd, 2015 at 10:22 am
im after a 90s xr200 cdi complete engine any way you could help?
March 2nd, 2015 at 6:37 pm
Hi Chris,
sorry cant help with that one as I mainly deal in road models. Cheers Simon
March 2nd, 2015 at 10:34 pm
Hi there do uz have any rear pegs that will fit suzuki ls650
March 2nd, 2015 at 10:37 pm
Hi Ken. yes I have a pair of pillion pegs from a 650 Savage in tidy order. $40/pair. If you email me at goodpartsnz@gmail.com I can provide further details. Cheers Simon
March 3rd, 2015 at 1:38 pm
Hi Im looking for a LH mirror for a 07 VFR 800 Cheers Phill
March 3rd, 2015 at 9:37 pm
Sorry Phil, no parts for the VFR800 in stock. Cheers Simon
March 10th, 2015 at 11:20 am
Hi, I’m wanting a yoshi slip on exhaust for a 89 GSX750f. Thanks
March 10th, 2015 at 7:09 pm
Sorry cant help with that one. Cheers Simon
March 13th, 2015 at 3:49 pm
Hi there 🙂 Im after some Hyosung GT250R Parts. Break pads, Mirrors, Chains, Front Tire, Front Flaring (red- right side)
Cheers 🙂
March 15th, 2015 at 7:54 pm
Sorry all those parts were either sold or were damaged. Cheers
March 17th, 2015 at 8:26 am
Hi mate, I am needing a stator for a Kawasaki ZZR400 1992. You able to help at all or know where i might get one?
Cheers
March 18th, 2015 at 1:12 am
Hi Murray, sorry cant help with that one currently. Cheers Simon
March 18th, 2015 at 7:27 pm
hi i am after the front and rear brake switches for a 2005/6 gsxr1000. can you help?
March 18th, 2015 at 10:17 pm
Sorry no parts in stock for the GSXR1000 currently.
March 28th, 2015 at 2:13 am
Hey looking for some parts for a yamaha sr500 (1981)
-dip stick
-speedo cable
-sprocket oil seal
– maybe the sprocket drive shaft too
Cheers
March 28th, 2015 at 2:33 am
Sorry Leo, cant help w2ith those. Cheers Simon
March 29th, 2015 at 11:49 am
Hi, Im looking for some parts for a honda cb400SF year 2000
-Front plastic fender
-Rear plastics.
-Rear brake foot lever.
-Handlebars
-Cluster
-rear tail light unit.
Cheers.
March 29th, 2015 at 3:30 pm
Sorry nothing ion stock from that model.
Cheers Simon
March 30th, 2015 at 12:57 pm
Hi please advise if you have an SP1 in stock that you are wrecking
Thanks
March 31st, 2015 at 8:15 pm
I have dismantled an SP1 but have very few parts remaining.
March 31st, 2015 at 9:14 pm
Any engine parts left?
March 31st, 2015 at 9:15 am
hi i need front forks for my 1992 cbr600f
March 31st, 2015 at 8:14 pm
Sorry cant help with those.
April 1st, 2015 at 1:21 pm
Hi, I’m looking for a headlight for a 1994 Yamaha Virago XV250, just wondering if you have one in stock and if so a price for it?
Cheers.
April 1st, 2015 at 8:07 pm
Sorry Joel, nothing suitable in stock currently
April 17th, 2015 at 11:19 am
Hi there, I’m after the front fairing for my GSF 650s 2007. Are able to help ? Cheers and Beers Mike
April 17th, 2015 at 10:00 pm
Sorry Mike, nothing in stock for that model currently. Cheers Simon
April 22nd, 2015 at 2:25 pm
I’m after a pair of rotors for a Kawasaki KLE250, any chance you have any?
April 22nd, 2015 at 10:56 pm
Sorry cant help with those. Cheers Simon
April 27th, 2015 at 8:59 am
Hi there. I’m looking for a left side fairing insert with badge for a BMW F650CS in black or both sides in silver. Thanks a mil.
April 28th, 2015 at 6:49 pm
Hi there I have a ninja 250 engine on my go cart when purchased the engine housing was smashed by the chain really in need of a new housing for it other wise another engine around 500cc and up looking for something cheap
April 28th, 2015 at 9:56 pm
Hi Scott,
email me directly at goodpartsnz@gmail.com and if possible send me a photo to show what parts of your engine are damaged. Will see what I can do. Cheers Simon
May 3rd, 2015 at 4:09 pm
Hi I need a kick start screw for a Suzuki drz250 can you help?
May 3rd, 2015 at 7:47 pm
Sorry James, I mainly deal in road models so cant help with that one. Cheers Simon
May 8th, 2015 at 10:13 am
Hi Simon, I’m looking for 2 ignition coils complete with HT leads and plugs connectors, air filter, air filter box, instrument cluster, tacho and speedo cable and ignition switch w keys for a 1980 GS550, Cheers Dave.
May 8th, 2015 at 7:36 pm
Hi Dave,
I may be able to help with an airbox, instrument cluster and a speedo/tacho cable but need to make sure these are for the correct model GS550. If you can email me directly at goodpartsnz@gmail.com I can send photos for you to compare. Cheers Simon
May 12th, 2015 at 11:07 pm
Hi there I’m looking for a Hornet 250 tank.
May 13th, 2015 at 8:41 am
Sorry Dave all sold currently. Cheers Simon
May 18th, 2015 at 4:19 am
Do you have any damaged vmax part or damaged complete bike
May 18th, 2015 at 9:10 am
Hi Lyonell,
the only Vmax parts I currently have in stock are a pair of forks (pre 1993 model), front wheel, brake rotors, axle and a pair of four pot calipers and adapter brakets to fit the V-max forks. Cheers
May 18th, 2015 at 11:48 pm
hey do you have parts for a vf400f? i am after a diaphram rubber from the carby and the coil packs.
May 19th, 2015 at 9:38 am
Hi. thanks for your inquiry. I do have parts for the Honda VF400F and have a pair of coils with leads and plug caps at $100 and also a complete set of carbs at $100. If you email directly at goodpartsnz@gmail.com I can provide more details including photos. Cheers Simon
May 19th, 2015 at 8:50 pm
Hi im after carby to airbox rubber mounts..and full fairing set.can you help
May 20th, 2015 at 9:20 pm
For what model?
May 21st, 2015 at 1:26 am
Sorry bout that for a fzr 250 1989 3ln..carby to airbox rubber mounts..plus a full fairing set
May 21st, 2015 at 7:20 pm
No problem at all , but sorry I cant help with either of those. Might be worth looking to see if you can get a fairing set from China as they are very reasonably priced. Cheers
May 22nd, 2015 at 7:44 pm
Ok cheers thanks
May 27th, 2015 at 5:48 pm
hi does u have any parts for a 2003 pgo comet sccoter do u have two mirriors that would fit and a speedo cable thanks
May 27th, 2015 at 7:33 pm
Sorry Craig, cant help with scooter parts. Cheers Simon
May 28th, 2015 at 3:17 pm
Hi, do you have an R1 throttle tube in good condition I will look at any year 03 preferred. cheers Roddy
May 28th, 2015 at 10:04 pm
Hi Roddy,
Sorry cant help with a throttle tube. I have the complete throttle assembly including the tube from a 2002 R1 at $50, but don’t wish to sell the throttle tube separately. Cheers
June 9th, 2015 at 6:03 am
Hi do you have any engine parts for a ktm 200 EXC 2004 i need the aluminum casing off the clutch side and maybe the clutch cover too
June 9th, 2015 at 10:24 am
Sorry cant help with those Mike as I mainly deal in road models. Cheers Simon
June 10th, 2015 at 5:54 pm
Hi i have a ducati monster dark ie 2001 and need the left rear wheel chain adjuster mine has broken off where the bolts go through to pull wheel back. Cheers rhys
June 10th, 2015 at 11:45 pm
Hi Rhys,
I have a pair of chain adjusters from a 1997 Monster 600 but not sure if they are the same as your 01 model. If you email me at goodpartsnz@gmail.com I can send a photo for you to compare. Cheers Simon
June 11th, 2015 at 9:41 pm
hi there
1993 kawasaki zxr 250 ..would you have any near new or wof-able tires available that are not shinko or bridgestone?? F 120/60-17 an a R 140/60 -18 ??
thank you for your time and martygadd76@gmail.com for an alert ,if ya have any luck
thank you
June 14th, 2015 at 7:49 pm
Sorry nothing suitable in stock currently.
June 15th, 2015 at 6:54 pm
Evening, Would you have a side stand for a GSXR 1000 2010 (L0)
June 21st, 2015 at 9:05 pm
Sorry not currently. Cheers Simon
June 16th, 2015 at 1:37 pm
I was looking for a left hand side engine casing for a 1990 suzuki gsf 250. Cheers Ian
June 16th, 2015 at 5:52 pm
Hi Ian,
I think I have one in stock. Please email me directly at goodpartsnz@gmail.com
Cheers
Simon
June 17th, 2015 at 7:30 am
Hi, im looking for front L & R calipers for an 81 suzuki gs750L. Maybe you could be of help?
June 17th, 2015 at 10:02 pm
Hi. I have both front calipers from a 1978 GS750 but not sure if they are the same as your 81 model. If you email me at goodpartsnz@gmail.com I can send photos for you to comp;are. Cheers Simon
June 27th, 2015 at 9:12 pm
Hi there, do you have a fuel tank for an 01 GS500 Suzuki? Please flick me an email on mataitis@ihug.co.nz Cheers – Owen.
June 29th, 2015 at 9:29 pm
Sorry Owen, all sold currently. Cheers Simon
June 30th, 2015 at 5:51 pm
Hi after some parts for a jap import 1996 cb400 super four. frame nc39
thanks scott
June 30th, 2015 at 6:31 pm
Hi Scott, I have dismantled one of these but not many parts remaining. Email me directly at goodpartsnz@gmail.com and let me know what parts you’re looking for. Cheers Simon
July 1st, 2015 at 3:44 am
I am looking for a camshaft and timing gear and bolts for a 1981 Honda xr250 r dirtbike
July 1st, 2015 at 7:49 pm
Hi Chris,
sorry cant help with those. Cheers Simon
July 4th, 2015 at 8:48 pm
Hi looking for the Right hand side mirror CBR 750 (RC27) 1989 the bolt holes are 60mm to centers
July 5th, 2015 at 5:54 pm
Hi Alistair. I will compare with one from an early CBR1000F and get back to you ASAP.
Cheers Simon
July 6th, 2015 at 1:46 pm
hi simon much luck on the mirror at all?
July 6th, 2015 at 8:09 pm
Hi Alistair,
as I thought, the CBR1000 mirrors are different. The bolt spacings are 80mm centre to centre. Cheers Simon
July 19th, 2015 at 8:53 pm
hi im looking for a yamaha yzf1000 or fzr1000 exup complete motor including cdi and carbs for a transplant to a yzf750
July 26th, 2015 at 6:18 pm
Sorry Matt, nothing suitable in stock currently. Cheers Simon
July 26th, 2015 at 12:34 pm
Hi I am after an engine for a VFR 400 1986 NC21 my cases are no good would prefer a long block but anything considered,Thanks GUY
July 26th, 2015 at 6:19 pm
Hi Guy,
I have an NC21 engine in stock that may suit. If you can email me directly at goodpartsnz@gmail.com I can supply photos and details. Cheers Simon
August 12th, 2015 at 8:34 am
Hi guys I’m after a set of spoked rims for s 04 r1200gs cheers Rog
August 12th, 2015 at 10:34 pm
Sorry Roger cant help with those. Cheers
August 19th, 2015 at 9:20 pm
Hi. I’m after some crash bars for my 2000 bmw Dakar GS 650f thanks Ollie
August 19th, 2015 at 9:29 pm
Sorry cant help with parts for that model. Cheers
September 13th, 2015 at 11:07 am
Hi,
Do u have any parts for a kx 125 dirt bike? Years from 1996-1998. Either that or an exhaust/muffler that might work. Similar. Cheers
September 13th, 2015 at 7:09 pm
Sorry Daniel. Mainly deal in road models. Cheers Simon
September 13th, 2015 at 6:25 pm
Hi there after the left hand bikini fairing for a ducati hypermotard 1100
September 13th, 2015 at 7:09 pm
Sorry cant help with that one Regan.
September 20th, 2015 at 4:07 pm
Hi there do you have any 1986 Honda NSR250 Pistons, Heads and Sleeves?
Cheers 🙂
September 20th, 2015 at 7:51 pm
Hi Jeremy,
I do have some heads and barrels from the NS250R but will need to check on their condition etc. If you email me directly at goodpartsnz@gmail.com I will get back to you with more details once I have had a closer look at the items I have in stock. Cheers Simon
September 28th, 2015 at 10:26 am
Hey just wondering if you have a honda cbr mc22 gear lever ?
September 28th, 2015 at 7:22 pm
Sorry cant help with that one. Cheers
October 3rd, 2015 at 1:31 pm
hi there im after a right hand coil / tank braket / water pipe that goes into the back of engine and rubber hose that goes to thermostat / throttle cabel holder that bolts to carbs all for a 1990 zzr 250 thanks glen oh and would you have a phone number that I could ring ??
October 3rd, 2015 at 10:56 pm
Hi there. Looking for a fuel pump for a BMW f650gs
Fuel pump. Can you help? Thanks
October 4th, 2015 at 8:54 am
Sorry cant help with that one Greg.
October 4th, 2015 at 5:51 pm
Hi Glen. Should be able to help with those. Will email you directly. Cheers Simon
October 6th, 2015 at 7:50 pm
Hi
Please can you tell me if you have wrecked any of the following bikes.
R850R
R1100R
R1100GS
I am looking for an exhaust collector box and a rear subframe.
Thank you. Paul Robinson
October 6th, 2015 at 9:15 pm
Sorry Paul,haven’t dismantled any of those models to date. Cheers Simon
October 17th, 2015 at 8:41 pm
Hi .. im after a 90s yamaha rev counter that goes up to 16000 rpm at least for a period race bike .. cheers Gordy
October 18th, 2015 at 8:29 am
Hi Gordon, I will email you directly with photos of some possibilities. Cheers Simon
October 18th, 2015 at 8:45 pm
Wood u have a gsxr 750 cdi
October 18th, 2015 at 9:18 pm
Hi Thomas. I need to know the exact model you want the CDI for as they are all different. Email me directly with the details at goodpartsnz@gmail.com
October 23rd, 2015 at 10:19 pm
Hi I’m after Suzuki 2004 gsx 250 front and rear indicators can you give me a price please
October 24th, 2015 at 8:15 am
Sorry Drew all indicators have sold currently. Cheers Simon
October 26th, 2015 at 5:35 pm
Hi there,I’m looking a foot peg for my 50cc Suzuki scooter, model 2007,cheers
October 27th, 2015 at 9:05 am
Sorry cant help with scooter parts. Cheers
November 10th, 2015 at 11:35 pm
Hi do you have a 94 Honda cbr 900 rr left side light . It’s on the left if you were sitting on the bike . Looks as though a stone had gone through it . Any luck here , cheers !
November 11th, 2015 at 8:16 am
Hi Marcus,
sorry cant help with that one. Cheers Simon
November 11th, 2015 at 1:18 pm
Hi there we have a Honda TRX 500 quad that we need a towbar for, do you have one? thanks
November 11th, 2015 at 7:13 pm
Sorry cant help. I only deal in road bikes. Cheers
November 11th, 2015 at 7:52 pm
Can you show pic of tail light brake fail sensor please. Gary
November 11th, 2015 at 8:07 pm
Hi Gary, will email you directly.
November 12th, 2015 at 12:26 pm
After radiators for a DRZ400 1991 if possible. Thanks
November 12th, 2015 at 6:06 pm
Sorry no, as I mainly deal in road models. Cheers
November 18th, 2015 at 7:36 pm
hi. i’m looking for the rubber chain guide/guard for the swing arm on a zzr1100. i think it’s a 96. part number: 55020-1365. or anything that would fit/work. thanks
:
November 18th, 2015 at 9:50 pm
Sorry cant help with that one Henry.
December 17th, 2015 at 9:56 pm
Hi, my name is Markus (living in Nelson New Zealand) and I was asking on trade me about the forks for a Suzuki gsx250 from 2004. Could you come back to me if you would have some in good condition please. Mine are bend. Thank you very much.
December 17th, 2015 at 10:22 pm
Hi Markus. The only pair I have in stock at the moment are also slightly bent, but as long as they are not creased, they are easily and cheaply straightened. I have had these done before at a mc shop in Christchurch and it would likely cost you $80-$100. I would look at this option for your current forks first, unless they are creased.
You can email me directly at goodpartsnz@gmail.com if you want details on the forks I have in stock. Cheers Simon
December 27th, 2015 at 2:08 pm
Hi. I am looking for a wrecked Honda Silverwing 600cc for a project. Motor must be sound with all wiring etc for motor. Not worried about body parts or lights etc. Thanks Joe
December 27th, 2015 at 8:31 pm
Sorry cant help with that one Joe. Cheers Simon
January 13th, 2016 at 3:16 pm
Hi, I’m looking for a AG100 kickstart lever for a Yamaha farm bike. Please let me know if you have it and the cost. Thanks
January 20th, 2016 at 9:14 am
Hi I’m after a ignition coil for a 1982 Suzuki Dr 250
January 20th, 2016 at 7:22 pm
Hi Joe,
I don’t have a coil from a DR250 but can supply one from an early GN250 which should be similar. Coil with lead and plug cap would be $40. You can email me directly at goodpartsnz@gmail.com if you are interested and I can email a photo.
Cheers Simon
January 26th, 2016 at 12:54 pm
Hi im after spedo cable and the part that fits to the wheel to turn it for a drz400e. Also a diaphram for the carb if that is a possibility
January 26th, 2016 at 1:35 pm
Hi Colin, sorry no parts for that model in stock as I mainly deal in road models. Cheers Simon
January 27th, 2016 at 12:16 pm
Hi
Looking for any set of indicators with ‘E’ Standard marks on the lens for the purpose of getting an imported bike through compliance.
These are only going to be a temporary install. Any stem type will do as I will make brackets.
Also a tail light is needed that I can sick to the rear fender (Or make bracket).
Could you advise price for 4 turn and taillight with number plate light?
Thanks Chris
January 27th, 2016 at 6:43 pm
Hi Chris,
I am sure I can find a set of indicators to suit and will have a look tomorrow. If you can email me directly at goodpartsnz@gmail.com I will send photos if I have anything suitable. Also need to know if the tail light needs to also double as a number plate light. Cheers Simon
January 29th, 2016 at 9:13 pm
Hi, would you have a motor for a bmw r1100s?
Regards Glenn Smith
January 30th, 2016 at 9:20 am
Hi Glenn. Sorry cant help with any R1100S parts. Closest I have is an R1100GS . Cheers Simon
February 2nd, 2016 at 11:05 am
After a zxr600 kawasaki 09 ’15 green ptrol tank ?
February 2nd, 2016 at 12:10 pm
Hi Michael. I have a 1998 ZX6 tank in the original green and blue/purple colour scheme. If you email me directly at goodpartsnz@gmail.com I can send you photos. Cheers Simon
February 14th, 2016 at 12:28 pm
Hi there. A long shot but I’m looking for a gas tank for a 1981 Suzuki PE 175X. Any PE tanks (175 a 400) from 1980’or 81 will probably fit.
Thanks
February 14th, 2016 at 8:58 pm
Hi Paul, your long shot may have paid off. If you email me at goodpartsnz@gmail.com I will send photos of a tank that looks very much like a PE175 of that era. Cheers Simon
February 15th, 2016 at 3:10 pm
Any chance u would have a gsxr 750 k4 front wheel?
February 15th, 2016 at 6:31 pm
Sorry no
February 23rd, 2016 at 4:45 pm
Looking for parts for 1999 GSXR 750, Fairings, triple clamps and a couple of other bits, can you help?
February 23rd, 2016 at 6:23 pm
Sorry cant help with parts for that model. Cheers
February 25th, 2016 at 3:36 am
Looking for cbr600 f3 front right disk.
March 6th, 2016 at 9:14 pm
hi, I contacted you about the hornet number plate holder, rear light and rear turn signals. can you let me know once the hornet arrives?
thank you, jack
March 6th, 2016 at 9:22 pm
I will email you directly. Cheers Simon
March 7th, 2016 at 12:49 pm
HI there I’m after a side cover that goes over battery for a 1984 cbx 550 if you have one please let me know price of cover and shipment to the westcoast regards kelvin
March 7th, 2016 at 12:57 pm
Hi Kelvin,
I should have both sidecovers in stock. Will email you directly with more details. Cheers Simon
March 19th, 2016 at 11:40 am
Do you have an ignitor unit for the Vmax
March 20th, 2016 at 8:52 am
Hi. I have a complete 1990 Yamaha Vmax in stock. I believe the CDI did change at some stage but if you can email me directly at goodpartsnz@gmail.com preferably with a photo of your CDI, then I can compare with the one I have here. Cheers Simon
March 27th, 2016 at 11:38 am
My converting my 2003 sv1000 from sports to naked
I’m after front light , brackets , speedo on top triple clamp
March 27th, 2016 at 7:45 pm
Sorry cant help with those Mike. Cheers Simon
April 7th, 2016 at 8:48 pm
hello i be afta honda steed frame any condition
April 13th, 2016 at 6:39 pm
Sorry cant help with that one. Cheers
April 13th, 2016 at 5:10 pm
Hi, after the bulb holders/loom for the neutral and indicator lamps on the cluster for a Suzuki GZ250. Thanks
April 13th, 2016 at 6:39 pm
Hi Nic,
just dismantling a GZ250 with a damaged dash so should be able to help. If you can email me directly at goodpartsnz@gmail.com I will be able to provide further details. Cheers Simon
April 19th, 2016 at 7:28 am
Hi there have you got any 1986 honda lead parts ..ch250elite
April 19th, 2016 at 9:31 am
Hi Karl. I don’t generally deal in scooter parts but have a few parts that came from another dismantler. All I have from the lead would be tail light, headlight and a dash. If any of these are of interest, you can email me directly at goodpartsnz@gmail.com and I can send photos. Cheers Simon.
April 20th, 2016 at 1:21 pm
Do you have a mc22 windscreen, preferably tinted in a dark colour? and the bracket that holds it?
Thank you =)
April 20th, 2016 at 6:50 pm
Sorry cant help with those currently. Cheers Simon
April 21st, 2016 at 11:49 pm
Hey I’m looking for a master cylinder for a vtr250 1995 could I get an average pricing as well
April 22nd, 2016 at 9:14 am
Hi Shane. I have a front brake master cylinder assembly complete with brake lever from a 1997 Honda Hornet 250, which should be the same as those used on the VTR. You are looking at $120 plus postage. If you email me directly at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
May 2nd, 2016 at 12:54 pm
Gday,
After the front end of a cb600 (hornet?) Or similar ideally with the dual discs and adjustable suspension
Cheers
May 2nd, 2016 at 1:01 pm
Hi Simon,
I dont have a Hornet front end, but if this is for a project bike, rather than a Hornet, I have a very noce complete front end from a 2001 Yamaha XJ400. This has twin discs and same calipers as the early R1. If you would like more details including photos, please email me directly at goodpartsnz@gmail.com Cheers Simon
May 2nd, 2016 at 4:22 pm
Gday, it was for a hornet. I’ve heard the the 600 front end fits the 250 with very little modification. Thanks for your help nonetheless!
May 7th, 2016 at 8:50 pm
Hi i am looking for handlebar end (bolts into the handle bar) for honda cbr250rr mc22.
would you have them by any chance? thanks. Elisha
May 17th, 2016 at 5:54 pm
Hello, I’m looking for a 1984 Honda ns250r taillight and small cowling that goes over the light please let me know if you can help.
May 17th, 2016 at 6:54 pm
Hi Anthony. I think I may have one on an NS400R but will need to check. If you email me directly at goodpartsnz@gmail.com I will respond with a photo and details once I have checked it out. Cheers Simon
May 23rd, 2016 at 11:47 am
Hi there, I am looking for fairing mirrors for my 1986 Yamaha FZ750 if you have any please? Or know where I can get some? Thank you 🙂
May 23rd, 2016 at 1:07 pm
Hi. Sorry cant help with mirrors for your FZ750 but you might find the easiest option is to fit some aftermarket type mirrors that have adjustable mounts. Try a m/c accessory shop if you have one in your local area. Cheers Simon
May 31st, 2016 at 12:56 pm
Hi again Simon
Would you have a radiator for 92 kawasaki zxr 250 (that doesn’t have any pin hole) if so how much
thanks dameon
May 31st, 2016 at 1:09 pm
Hi Dameon. yes I have a good radiator in stock. Please email me directly at goodpartsnz@gmail.com Cheers Simon
June 1st, 2016 at 6:30 pm
Do you have any Ts 125 fuel tanks available
June 1st, 2016 at 10:56 pm
Hi Kerran,
I have a TS125 and a TS185 tank in stock, although not sure what year. If you email me directly at goodpartsnz@gmail.com I will provide photos and further details. Cheers Simon
June 23rd, 2016 at 1:28 am
Hey there, I’m looking for a gas tank for a Honda cbr250r mc19, just wondering if you have any with min dents?
Cheers
June 23rd, 2016 at 9:16 am
Hi. I have one MC19 fuel tank in stock. Its in good tidy order overall with one small shallow dent that should be easily repairable prior to repainting. If you email me directly at goodpartsnz@gmail.com I can provide photos and other details. Cheers Simon
July 15th, 2016 at 1:33 am
Hi
Would you have in stock 1983 Xv750 virago carb holder intake manifold boots
July 15th, 2016 at 11:20 am
Sorry cant help with those currently/
August 1st, 2016 at 9:26 am
Hi im looking for a tl1000 front end including tripple tree, forks, wheel, brakes can you give me a price if you have anything cheers
August 1st, 2016 at 11:22 am
Hi Devan,
sorry cant help with a TL1000 front end currently. Cheers Simon
August 20th, 2016 at 1:12 am
Hi there, do you have the choke assembly for a 1988 Suzuki intruder vs700? Cheers
August 20th, 2016 at 10:12 am
Hi Andy. I have the choke cable assembly with choke knob etc available at $30. If you email me directly at goodpartsnz@gmail.com I can provide a photo. Cheers Simon
August 23rd, 2016 at 7:22 am
Hey mate I’m after a few parts for my 1982 gsx400 e regulator rectifier, and clutch drive pin ta
August 23rd, 2016 at 8:41 am
hi Stefan. I have a couple of rectifiers in stock but we will need to check they are the same as yours. I should also be able to supply the clutch pin. Cheers Simon
August 31st, 2016 at 7:17 am
after the Hyosung gt250r motor just contact me next week when its ready thanks
August 31st, 2016 at 9:05 am
Thanks.
Will email directly.
September 14th, 2016 at 12:45 pm
Hi there is looking to buy a kawasaki 900 cc, DOWNFALL previous owner has lost the key and said ignition may have been tampered with due to people attempting to steal it.. where and how much would this cost to replace in South auckland areas pleas
September 14th, 2016 at 7:32 pm
Hi. I would need to know what model and year 900cc Kawasaki you are referring to before I can check if I have an ignition switch in stock. I am based near Christchurch, so would be able to supply a replacement part (if I have one in stock) and post it to you. You would need to arrange fitting yourself in Auckland. You can email the bike details directly at goodpartsnz@gmail.com Cheers Simon
September 15th, 2016 at 1:32 pm
Hi Their I am after front and rear wheels for wr450 or yz cheers Nick 0226750305
September 15th, 2016 at 1:40 pm
Sorry cant help with those Nick. I only stock road model parts. Cheers Simon
September 17th, 2016 at 2:05 pm
Hey do you have a intake manifold for a 350cc yamaha moto 4.
September 17th, 2016 at 10:49 pm
Sorry cant help with that one.
September 20th, 2016 at 7:17 pm
Hi looking for parts for 07 RMZ 450. Need front sprocket cover and heat deflector plate for the exhaust.
Phone Shaun 0274826600
September 20th, 2016 at 7:43 pm
Sorry cant help with those Shaun. I only deal in road model parts. Cheers Simon
September 21st, 2016 at 8:34 pm
Was wondering if you had any indicators for a 1980 gsx 1100 by any chance
September 23rd, 2016 at 9:34 am
Hi Les. I think the early GSX1100 used the same type of indicators as other early 80’s Suzuki models, so I may have some in stock. If you can email me at goodpartsnz@gmail.com with some photos of the correct indicators, I will compare with those I have in stock. Cheers Simon
September 29th, 2016 at 4:15 pm
hi there, did you have any spare 38mm-40mm exhaust clamps that would fit a 2012 kawasaki ninja 250? would love to come and pickup, any excuse for a ride.
September 29th, 2016 at 8:39 pm
Hi Paul,
I havent dismantled that model but may have something that would suit. I will have a look and email you directly if I find something suitable. Cheers Simon
October 20th, 2016 at 3:06 pm
Was just wondering if you guys had a nc23 or nc29 main and sub fames swingarm
October 20th, 2016 at 4:48 pm
Hi Alex.
I have a 1990 NC23 frame with expired rego and should also have a swingarm, but not a rear subframe. You can email me at goodpartsnz@gmail.com if you would like further details. Cheers Simon
October 26th, 2016 at 7:09 pm
Hi do you have any suzuki uz 50 2013 let’s 4 parts .front forks or front rim cheers Nathan
October 26th, 2016 at 7:32 pm
Sorry nothing in stock for that model. Cheers.
November 4th, 2016 at 7:08 pm
I’m looking for a Suzuki 2001 drz250 airbox cover
November 6th, 2016 at 6:45 pm
Sorry cant help with that one Tim. Cheers Simon
November 8th, 2016 at 12:19 pm
Hey there I’m trying to find a pick up coil for my 2004 suzuki gsx invader 250. Wondering if you can help cheers
November 8th, 2016 at 5:38 pm
Hi Ryan. This is a common issue with the GSX250 Invader. I have one set left in stock currently. The Pickup coils are part of the stator assembly on this model so both come together as a single assembly at $180 plus postage. If you are interested, please email me directly at goodpartsnz@gmail.com Cheers Simon
November 22nd, 2016 at 10:00 pm
Hi there. Do you have any Suzuki ag100 parts? I’m looking for a front fender. Front light and assembly. And a good condition seat. Cheers Elvin
November 23rd, 2016 at 7:50 am
Hi Elvin. Thanks for your enquiry. I don’t know of a Suzuki AG100 model. Can you check that you have this correct? Thanks Simon
November 24th, 2016 at 2:20 pm
Hi my drz400 engine is seized do u have anything by any chance? Thanx shane
November 24th, 2016 at 7:14 pm
Sorry cant help with that one Shane as I only deal in road models. Cheers Simon
December 13th, 2016 at 7:55 am
Hi,
I’m trying to track down a frame for a standard model CX500, either with or without swingarm.
Do you have any frames available currently?
A rego on hold one would be perfect, it won’t be a show stopper if the frame isn’t registered.
Thanks,
Darryl
December 13th, 2016 at 8:58 am
Sorry cant help with a CX500 frame Darryl. All mine have sold currently. Cheers Simon
December 19th, 2016 at 9:59 pm
HI. Im after a muffler for a suzuki vl250. Any chance you have one in Stock?
Cheers
December 20th, 2016 at 8:16 am
Hi Sam.
yes I have a factory muffler from a 2009 VL250 in very good order at $150. If you would like further details please email me at goodpartsnz@gmail.com Cheers Simon
December 29th, 2016 at 12:40 pm
Looking for a nearside front brake rotor for my Suzuki GSR750.
December 29th, 2016 at 8:56 pm
Sorry cant help with that one Richard. Cheers Simon
January 5th, 2017 at 1:12 am
Hi im after a 86 gsx400 eg cdi if you have one.
January 5th, 2017 at 8:30 am
Hi Aaron. If this is the GSX400E twin, then sorry I cant help with a CDI. If I have the wrong model, please let me know. Cheers Simon
January 8th, 2017 at 10:14 pm
Hi I’m looking for a muffler off a Honda xr250A 1979? I’m looking for the font part that goes into to the motor
January 9th, 2017 at 8:18 am
Sorry cant help with that one as I mainly deal in road model parts. Cheers
January 19th, 2017 at 9:39 am
Cb400t hawk 2 1977 parts bike for sale in chch any int?
January 19th, 2017 at 11:40 am
Hi Mike. Will email you directly for some details. Cheers Simon
February 8th, 2017 at 2:22 pm
Hi, I need a complete carburettor set for GSX600f
Cheers
February 8th, 2017 at 6:20 pm
Hi Nick. Sorry cant help with that one currently. Cheers Simon
February 8th, 2017 at 9:32 pm
Hi there, I am trying to find a fuel tap for my 1990 Honda NTV Revere 600
Cheers
Paul
February 9th, 2017 at 8:12 am
Sorry cant help with that one Paul. Cheers Simon
February 10th, 2017 at 12:14 am
Hi do I have a air filter for a Honda cd250u thank u
February 10th, 2017 at 7:22 am
Sorry cant help with that one James. Cheers Simon
February 12th, 2017 at 4:44 pm
hey i am
after few parts for hyosung gt650r 2013
February 12th, 2017 at 6:04 pm
Sorry no parts for that model in stock currently. Cheers
February 13th, 2017 at 10:31 pm
Hi there. Any parts for a 2008 KLX250 ? Strop broke and it fell off the trailer. Need top triple clamp. Headlight. Fuel cap and key. Throttle assembly with start and kill switches. Clutch lever. Brake lever. Cheers
February 14th, 2017 at 8:23 am
Sorry cant help with those Brendan, as I mainly deal in road model parts. Cheers Simon
February 23rd, 2017 at 4:54 pm
Hi I’m after a front mask bracket for 98 cbr900rr cheers chris
February 23rd, 2017 at 7:33 pm
Sorry cant help with that one.
March 23rd, 2017 at 12:16 am
Looking for Kawasaki Kr1s parts.
March 23rd, 2017 at 7:47 am
Hi Tristan. I have a small number of parts in stock from the KR1 but not the KR1S model. Cheers Simon
March 28th, 2017 at 11:38 am
Hi .looking for fuel tap for 1971gt 750 suzuki
March 30th, 2017 at 11:02 am
Sorry for the late reply Rod. Sorry cant help with a suitable fuel tap. Cheers Simon
March 29th, 2017 at 7:57 pm
Looking for a set of forks for an 07 675 triumph daytona any chance?
March 30th, 2017 at 11:00 am
Sorry nothing in stock for that model. Cheers Simon
April 1st, 2017 at 9:22 am
Do you have any complete cb750 Honda engines and maybe any chopper frames
April 1st, 2017 at 12:01 pm
Sorry cant help with either of those.
April 6th, 2017 at 5:26 pm
Gidday we have a cx500c and are looking for a few bits like guards, seat, inlet rubbers for the carries. Probably more later as its a cafe racer project. Can you help with the above for starters?
April 6th, 2017 at 8:44 pm
Hi Mike. I have dismantled a couple of CX500’s but not a great deal of parts remaining I’m afraid. I cant help with original guards, seats or inlet manifolds currently but you are welcome to email me at goodpartsnz@gmail.com with details of specific parts as you work through your project build. Cheers Simon
April 9th, 2017 at 7:01 am
Hey mate you hav a blue and white fairing kit for fzr 250 1989 to 1990. And how much please.
April 9th, 2017 at 10:00 am
Sorry cant help with those. Do a Google search and see if you can find the Chinese fairing kits that are available for many models. Cheers
April 10th, 2017 at 6:14 pm
Hi
can you help me with KTM 1190 front and rear wheel set and any other parts available?
Thanks
April 10th, 2017 at 8:49 pm
Sorry no parts for that model in stock. Cheers
April 17th, 2017 at 1:30 pm
Hi there do u have a regulator rectifier for a 2008 Honda cbf250 part. number sh683ca
April 17th, 2017 at 8:57 pm
Sorry cant help with that one. Cheers
April 20th, 2017 at 7:51 pm
Hi, im after the side plastic covers off a 2005 drz250, which are the battery cover, air filter cover and the other side covers on the opposite side. Cheers
April 20th, 2017 at 8:57 pm
Sorry cant help with those as I mainly deal in road models. Cheers
April 21st, 2017 at 3:48 pm
looking for a 2000-2003 suzuki gxsr k1 frame in good condition not bent
April 21st, 2017 at 6:56 pm
Sorry nothing suitable in stock. Cheers
April 25th, 2017 at 1:32 pm
Hi i want that xz400 carb, but want the Yics unit attached if possible, they form an integral component when working correctly. how can I go about getting them?
Cheers
April 25th, 2017 at 8:16 pm
Hi Andrew. Yes I can supply both a pair of carbs and the YICS unit. If you email me directly at goodpartsnz@gmail.com I can provide further details. Cheers Simon
April 26th, 2017 at 6:39 am
Hi looking for right brake lever for a 2008 Honda cbf250 ?
April 26th, 2017 at 8:41 am
Sorry cant help with that one. Best to but a new after market lever. Cheers
April 26th, 2017 at 9:24 pm
Hi, ‘m looking for a starter motor for a suzuki VL250 2008 model. Anything available? Thanks
April 27th, 2017 at 9:01 am
Hi Neville. Sorry all sold currently. Cheers Simon
April 27th, 2017 at 5:23 pm
Hi I’m After a ’12-’16 CBR1000rr Speedo if you have one? Thanks
April 27th, 2017 at 6:33 pm
Sorry cant help with that one. Try Tony Rees Motorcycles in Whangarei as they may be able to help.
May 2nd, 2017 at 11:57 am
Right front foot peg bracket 4 zx9r 1995
May 2nd, 2017 at 7:05 pm
Sorry cant help with that one Ryan. Cheers Simon
May 5th, 2017 at 1:32 pm
Hey mate im looking for a fly wheel roto magneto for a 86 yz80
May 5th, 2017 at 6:53 pm
Sorry cant help with that one.
June 11th, 2017 at 5:05 pm
Hi there, i am looking for a starter motor for a 1990 cbr250rr MC22.
June 11th, 2017 at 8:02 pm
Hi Rob.
I can supply a starter motor at $80 plus postage. If you wish to purchase, please email me at goodpartsnz@gmail.com and I will provide my bank account details for payment. Cheers Simon
June 11th, 2017 at 5:06 pm
Hi, i am looking for a starter motor for a 1990 cbr250rr mc22.
June 12th, 2017 at 2:53 pm
Hi, I am on the hunt for a 1979 CB650 fuel tank – or even a CB750 that I can modify to fit.
June 12th, 2017 at 8:49 pm
Hi Dom. Sorry all sold currently. Cheers Simon
July 1st, 2017 at 11:08 pm
Hi would you have a coil pack for a cbx550 fc interga 1986 and mount bracket pl . How much pl. Regards RhysFahey
July 7th, 2017 at 7:28 pm
Do you have any klr250 engine parts?
July 9th, 2017 at 10:09 pm
Sorry cant help with that one.
July 15th, 2017 at 12:20 pm
can u help with exhaust for xl175 1973 honda thanksBob
July 15th, 2017 at 7:14 pm
Sorry cant help with that one Bob. Cheers Simon
July 19th, 2017 at 4:09 pm
Hello dear friend. Please inform me if you have for RGV 250 VJ21 PEPSI, petrol tank. front L+R cowls, and possibly the black end mufflers/stingers. All must be original. Looking forward to your reply. Regards George
July 19th, 2017 at 7:18 pm
Hi George. Thanks for your enquiry, but sorry I cant help with those. Cheers Simon
July 22nd, 2017 at 1:04 pm
Hi I’m looking for the speedo and dash connected for my Suzuki intruder vl 250
July 22nd, 2017 at 1:44 pm
Hi harry. I can supply the complete dash assembly for the VL250 in very good order at $100. You can email me at goodpartsnz@gmail.com if you would like further details. Cheers Simon
August 5th, 2017 at 7:40 pm
I’m looking for a gas tank that will fit on my96 yamaha xv250 virago what other year models and size bikes might fit
August 6th, 2017 at 7:07 pm
Hi Joe.
Sorry I cant help with a fuel tank for your XV250 and you really need to find the correct tank for that model, rather than trying to fit a tank from something else. Cheers Simon
August 16th, 2017 at 2:19 pm
Hello, I’m looking for a left side pillion footrest bracket for my 2012 Suzuki GSR750. Suzuki part number is: 43821-08J00-YAP. Thank you
August 16th, 2017 at 7:01 pm
Hi Brad. Sorry I cant help with any parts for that model. Cheers Simon
August 18th, 2017 at 1:01 am
im after a good condition lower right fairing in gloss black for a hyosung gt250r if possible the upper fairing too for the same side.
thanks
gareth
August 18th, 2017 at 6:55 pm
Hi Gareth,
sorry I cant help with that one as all good fairings have sold currently. Cheers Simon
August 19th, 2017 at 1:31 pm
Hi, do you have the coils with plug leads and caps for a Suzuki GSX250F Across – 1990? Thanks
August 20th, 2017 at 12:54 pm
Hi Chris. I have a pair of coils with leads and plug caps from a GSXR250 which should be the same as those used on the Across. These are available at $120/pair and if you email me at goodpartsnz@gmail.com I can provide further details including a photo.
Cheers Simon
September 6th, 2017 at 4:38 pm
Hi, For. 2006 Honda vtr 1000 I need the black plastic fitting that goes on choke cable, screws into the carb holding the choke plunger and spring.
September 6th, 2017 at 6:51 pm
Sorry cant help with that one Steve. These will be available new from Honda and shouldnt be expensive. Cheers Simon
September 10th, 2017 at 11:18 am
Do you have a 1990 cbr1000f crank cover?
September 10th, 2017 at 1:39 pm
Sorry cant help with that one Brent.
September 13th, 2017 at 3:01 pm
Kerry regarding gsxr
parts cheers
September 13th, 2017 at 8:46 pm
Will email directly Kerry. Cheers Simon
September 14th, 2017 at 11:34 am
Hi, looking for 2 front indicator lights (in good con) for ZZR400 1991. Also after a couple body fairing screws.
Let me know cheers
September 14th, 2017 at 3:42 pm
Hi Thomas. I can supply front indicators in good tidy order at $30 each. Postage on a pair would be $7 tracked to a non RD address. If you are interested in these, please email me at goodpartsnz@gmail.com and I can send photos and payment details. Cheers Simon
October 8th, 2017 at 9:41 pm
Do you have full engine for bmw Gt 650 scooter ! If so how much are u asking and what was milage ? Thanks in advance , Tony
October 9th, 2017 at 5:45 pm
Sorry nothing in stock for that model. Cheers Simon
October 10th, 2017 at 11:25 am
Hey I’m looking for a ignition coil with the coil lead and spark park cap on it for my Suzuki savage LS650 1988?
October 10th, 2017 at 12:32 pm
Hi Omesh. I have a coil with lead and plug cap from an LS650 at $50 plus postage. If you email me at goodpartsnz@gmail.com with your address details I can calculate postage. Cheers Simon
October 13th, 2017 at 5:42 pm
In need of parts for a 1971 Honda CB 100
October 13th, 2017 at 6:05 pm
Sorry cant help with much for the Honda CB100. I may have a speedo and possibly and engine barrel but tha’ts about all. Cheers
October 13th, 2017 at 8:14 pm
Hi Im looking for a fuel tank for a 1986 kawasaki Gpz600r
October 14th, 2017 at 8:49 am
Sorry cant help with that one. Cheers
October 27th, 2017 at 12:19 pm
Looking for a front left hand indicator for a VL800 mines 2010 but should fit any boulevard line.
October 27th, 2017 at 8:18 pm
Hi. I have a LH front indicator assembly from a 2012 model available at $30. You can email me at goodpartsnz@gmail.com if you would like more details including a photo. Cheers Simon
November 18th, 2017 at 3:05 pm
Hello
I am looking for an engine for a Yamaha xt660 2006.
Thank you
November 19th, 2017 at 8:13 am
Sorry cant help with that one.
November 19th, 2017 at 8:31 am
OK thank you for your time.
November 21st, 2017 at 5:34 pm
Just wondering if you have an ignition barrel for a 1989 gsxr250 at all not to worried if there isn’t a fuel cap or seat lock cheers
November 22nd, 2017 at 7:53 am
Hi Caleb. I can supply an ignition switch with a key at $60 or a complete lock set (ignition, tank cap and seat lock) at $120 plus shipping. This is for the GSXR250 GJ72A (not the GSXR250R GJ73A). You can email me at goodpartsnz@gmail.com if you would like further details including photos. Cheers Simon
November 24th, 2017 at 5:17 pm
Hi , do you have any stator available for a Honda blackbird 1997?
Cheers, Dan.
November 24th, 2017 at 5:48 pm
Sorry cant help with that one Dan. Cheers Simon
November 30th, 2017 at 5:23 pm
Fuel Tank for a 2004 Susuki SV650, preferably in silver.
November 30th, 2017 at 6:32 pm
Hi Matt. Sorry all sold currently. The SV1000 tank is identical if you happen to find one of those. Cheers Simon
December 2nd, 2017 at 6:18 am
Hi Simon. Would you have coil packs on hand for a k6 Bandit 1200s? Thanks
December 2nd, 2017 at 8:17 am
Sorry cant help with those Glenn. Cheers Simon
December 7th, 2017 at 11:03 am
needing a 05 cbr600rr fairing can you call me 0275050064
December 8th, 2017 at 7:54 am
Sorry Matt, no parts in stock for that model. Cheers Simon
December 8th, 2017 at 9:43 am
Can you help with carb parts for a 1996 rf 900r
Cheers.
Simon
December 8th, 2017 at 12:28 pm
Sorry no.
December 17th, 2017 at 12:03 pm
Looking for a front forks assembly and how much to post qld 4799 for a 1989 klr 250
December 17th, 2017 at 9:45 pm
Sorry cant help with those as I mainly deal in road models. Cheers Simon
December 19th, 2017 at 10:06 pm
Hi old mate I’m chasing a set of shocks for a 98 r1100gs hope you can help
cheers
December 20th, 2017 at 7:59 am
Hi Tony, sorry cant help with those as mine have sold. Cheers Simon
January 4th, 2018 at 12:23 pm
Hi, I’m looking for a rev counter cable for a 81 cb650 custom, will one fit from another model ?
January 4th, 2018 at 12:58 pm
Sorry nothing suitable in stock. The cables from the CB750/900F are possibly the same but not 100% sure.
February 19th, 2018 at 3:04 pm
Hi I’m looking for a front end forks etc for a 1997 Honda cbr fire blade 9oorr
February 19th, 2018 at 7:05 pm
Hi Troy, sorry cant help with those. Cheers Simon
February 23rd, 2018 at 11:53 pm
Hey there,
Do you have a radiator for a CB 600 1998?
Cheers,
Dan
February 24th, 2018 at 9:06 am
Sorry cant help with that one Dan. Cheers Simon
February 24th, 2018 at 2:18 pm
I need a klx 300 2007 kick start gear
February 24th, 2018 at 7:28 pm
Sorry cant help with that one as I only deal in road models.
March 11th, 2018 at 3:46 pm
I need a drive belt for a 2011 50cc 4stroke short case scooter please
March 12th, 2018 at 9:37 pm
Sorry cant help with that one Josh.
April 25th, 2018 at 6:33 pm
Just after a few bits for my 1979 HONDA CB750 FZ, do you have these, if so how much are they?
REAR BRAKE MASTER CYLINDER
Battery Rubber Box Fits Over Battery 50334-425-000
Front foot pegs, left and right if the chrome is is in good condition
Thanks,
Patrick.
April 28th, 2018 at 9:45 am
Hi Patrick,
sorry I dont think I can help with those. I may have a RH footpeg in tidy order but thats about all. If you email me at goodpartsnz@gmail.com I can send some photos. Cheers Simon.
May 20th, 2018 at 2:02 pm
Hi contact phone number please
May 20th, 2018 at 5:58 pm
hi Mike. thanks for your enquiry. Email is the preferred method of contact as it allows me to check my inventory for parts that you are looking for, as I cant do this by phone. Please email me at goodpartsnz@gmail.com Cheers Simon
July 6th, 2018 at 9:17 pm
Hi Team,
Currently looking for a front right footpeg and bracket for a 2009 yamaha scorpio 225,
Cheers
Zane
July 6th, 2018 at 10:02 pm
Sorry cant help with those Zane. They are easily broken (as you no doubt know) and tend to sell quickly. Cheers
July 8th, 2018 at 8:15 pm
Hi, any chance you have some headlight bulbs for a ’92 fzr250r?
July 8th, 2018 at 8:18 pm
Sorry cant help with those james, only a complete headlight assembly.
July 12th, 2018 at 3:52 pm
Hey bud, I’m lookin for a seat for a 99′ Ducati 900ss
July 12th, 2018 at 5:48 pm
Sorry cant help with that one.
July 14th, 2018 at 11:07 am
Morning after a clutch master cylinder assembly. The handle bar piece.
1998 bmw k1200rs
July 14th, 2018 at 6:57 pm
Hi John. I have a 2000 K1200RS in stock and the clutch master cylinder assembly with clutch lever in good order would be available at $150 plus postage. This doesn’t include the LH switch block which bolts to the master cylinder assembly. If you would like further details, please email me at goodpartsnz@gmail.com and I can then provide photos and also my bank account details for payment. Cheers Simon
July 30th, 2018 at 11:49 pm
I made contact about the lower triple clamp for a 89 gsx 750
July 31st, 2018 at 9:29 am
Hi Regan. Thanks for your enquiry. I will email you directly with a photo. Cheers Simon
August 2nd, 2018 at 11:03 pm
After a kick start lever .a chain and front tyre fr a Suzuki ts 250 cc
August 3rd, 2018 at 10:30 am
Sorry cant help with those. Cheers
August 5th, 2018 at 9:56 pm
Hey mate I’m after a radiator for my 1997 cb1300 x4…..
August 6th, 2018 at 8:58 am
Sorry Mark, no parts in stock for that model. Cheers
August 6th, 2018 at 6:43 am
Morning
Im enquiring if you have foot brackets and foot rests for a nc23 1989 honda cbr? And if so costs to ship to rotorua
August 6th, 2018 at 8:59 am
Hi. I see you have emailed me directly, so I will reply from there. Cheers
August 22nd, 2018 at 7:12 pm
Hi I’m looking for cables and controls for 1979 Honda xl100s.can you help?
Cheers
August 22nd, 2018 at 7:19 pm
Sorry cant help with those. Cheers
September 6th, 2018 at 9:25 pm
Any yzf250 2002 plastics mainly side plastics Also radiator shrouds
September 7th, 2018 at 9:24 am
Sorry Matt, I only deal in road models so cant help with those.
September 9th, 2018 at 10:22 pm
Hi
I’m looking for a speedo for a1983 Honda GL500
Thanks Tristan
September 10th, 2018 at 10:45 am
Sorry cant help with that one.
September 12th, 2018 at 4:09 pm
Hi Looking for a regulator/rectifier for YamahaYTM 200 (Yellow Bullfrog 3wheeler).Cheers
September 12th, 2018 at 6:39 pm
Sorry cant help with that one.
September 17th, 2018 at 3:27 pm
hi im looking for coil for bmw it has double end leads go on each end thanks
September 17th, 2018 at 10:12 pm
Hi Glen,
I am unavailable for 2 weeks due to a family bereavement, but if you are not in a hurry please let me know what model the coil is for and I will see if I can help on my return.
October 9th, 2018 at 6:02 pm
Do you have any 87 kawasaki gpx750 parts…need a fuel tank and left hand front footpeg and bracket
October 9th, 2018 at 6:11 pm
Hi Lewis,
I have parts from a couple of GPX750’s but fuel tanks have sold. I can supply a LH alloy footpeg hanger at $40 and a riders foot peg at $20. If you email me at goodpartsnz@gmail.com I can send photos and further details. Cheers Simon
October 22nd, 2018 at 10:13 pm
Hi,
Am in need of a suzuki djebel xc 250 cc engine ,, my bike model is 2004,, am in Africa kampala /Uganda ,,
i need it complete ,, that one with a kick and a batterry starter ,, with its carbulator ,,contact me on
+256-703687308
josephnsubuga52@gmail.com
KAMPALA- UGANDA
MAKINDYE DIVISION
October 23rd, 2018 at 7:13 am
Hi, thanks for your enquiry but sorry I cant help with an engine for that model. Cheers Simon
November 5th, 2018 at 12:34 am
looking for a 1988 suzuki savage ls650 gas tank in good cond.
November 5th, 2018 at 8:24 am
Sorry cant help with that one Alex.
November 19th, 2018 at 2:18 pm
Hi I am after a right front indicator lens for a 1989 Honda revere 600 motorcycle
November 19th, 2018 at 6:04 pm
Hi Stuart. I have have indicators from another Honda model that are the same as those used on the Revere. If you can email me at goodpartsnz@gmail.com and include some photos, then I will see if I can help. Cheers Simon
December 2nd, 2018 at 10:59 pm
Hi I’m danny looking to see if your kick stand will fit my fzr1000
December 3rd, 2018 at 10:57 am
Hi Danny,
please email me at goodpartsnz@gmail.com and I will then send you a photo to compare. Cheers Simon
January 4th, 2019 at 12:58 pm
Looking for carbs for a 1998 ducati monster 400
January 6th, 2019 at 4:29 pm
Sorry cant help with that one. Cheers
January 4th, 2019 at 3:59 pm
Hi, I’m looking for a cdi unit for a jx 50 Milan very common in Australia.
January 6th, 2019 at 4:31 pm
Sorry cant help with that one.
January 7th, 2019 at 9:07 am
Hi, I’m looking for a thermostat switch for my 1990 Honda Bros NT650, I believe the part number is 37760-mr1-003 if that helps.
January 7th, 2019 at 6:11 pm
Hi William,
Im sure I will have something suitable from another model. If you can email me at goodpartsnz@gmail.com I can then send photos. Also let me know if the sender unit screws into the thermostat housing or the radiator. Cheers Simon
January 22nd, 2019 at 10:48 am
Hi…looking for front and rear rims for 2002 Speed Triple 955. Single arm swing arm..twin disc front. I don’t need the rotors
Also speedo cluster for the same.
Based in Wellington.
Cheers
Dave
January 22nd, 2019 at 11:53 am
Sorry cant help with any parts for that model Dave. I have a single sided swingarm and hub assembly from a 2006 Sprint 1050, but I don’t know if its the same swingarm used in the Speed Triple. Cheers Simon
January 23rd, 2019 at 9:38 pm
Hi.looking for bar clamps and foot pegs to fit 2004 yamaha xvs 1100,
January 23rd, 2019 at 10:11 pm
Sorry cant help with those. cheers Simon
January 23rd, 2019 at 10:27 pm
Hi am aftr gj73a carbs.
January 24th, 2019 at 7:50 am
Sorry all sold currently.
January 26th, 2019 at 12:51 pm
Hi, I’m looking for a front right side clear indicator lens for a 2010 Hyosung 250GTR. Cheers Paul
January 28th, 2019 at 7:35 pm
Sorry all sold currently Paul. Cheers Simon
February 8th, 2019 at 11:59 am
Hi there i have a 07 gv250. In search of both rear shocks, main seat, and both covers under main seat and battery if you have one please. Cheers Rex.
February 11th, 2019 at 9:12 am
Hi Rex. Sorry for the slow response as I have been away for a few days. I cant help with a battery, but I will have a riders seat in good order at $80, a pair of rear shocks in good order at $100/pair and a pair of red sidecovers in good order at $80/pair plus shipping. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
February 9th, 2019 at 10:34 pm
AFter a fairing kit for a hyosung gt250r 2006 yellow please if u can help
February 11th, 2019 at 9:04 am
Hi Douglas.
I’m not sure if I have a complete fairing set in stock currently. Definitely nothing in yellow or red. I may have a complete set in black, but there may be some repairs needed. If you think you may be interested, you can email me at goodpartsnz@gmail.com and I can then provide further details including photos. Cheers Simon
February 16th, 2019 at 10:01 pm
Do you have front brake discs for 1990 suzuki gsx 250? Ive been told model is GJ72A.
February 17th, 2019 at 10:33 am
Sorry all sold
February 23rd, 2019 at 10:01 pm
Hi any yz450f 2011 engines
February 24th, 2019 at 8:10 am
Sorry cant help with that one.
March 4th, 2019 at 3:49 pm
Hi there,
Could you please provide a list of your available parts for an RGV250.
I have a restoration project on the go and I need quite a few parts from engine to fairing to rear wheel and brake assemblies.
It’s a VJ21 89 model, however I am doing banana swing arm conversion. I have the arm and linkage only for the conversion.
I understand the are some GXSR compatible items like brakes and rear wheel etc 17”.
I’m a serious buyer, so I would appreciate your available parts list.
Many Thanks,
Nathan
March 4th, 2019 at 7:18 pm
Hi Nathan. I have very few parts for the RGV250 in stock, so probably cant help a great deal. If you can find out what model rear wheel and brake set up would be suitable for your conversion, I will then see if I have anything suitable in stock. You are welcome to email me at goodpartsnz@gmail.com Cheers Simon
March 22nd, 2019 at 12:15 am
Hi I’m a looking for a 1997 RMX 250 inner clutch sleeve.
Thanks
Brett
March 22nd, 2019 at 7:06 am
Sorry cant help with that one Brett as I only deal in road models.
April 23rd, 2019 at 2:53 pm
Hi do you have a stator for a 2008 Suzuki VL250?
April 23rd, 2019 at 3:01 pm
Sorry cant help with that one.
April 28th, 2019 at 8:05 pm
Hi, I need a crank and maybe other engine parts for ’94 triumph 900 triple?
April 28th, 2019 at 10:02 pm
Sorry cant help with that one.
May 25th, 2019 at 1:43 pm
Looking for an R1 sprocket carrier and cush drives.
Have you anything available and for how much ?
Thanks Al.
May 25th, 2019 at 5:18 pm
Hi Al.
I have a sprocket carrier and a set of cush drive rubbers in stock from a 2005 R. If you think these might suit your requirements, please email me at goodpartsnz@gmail.com and I can reply with photos for you to compare. Cheers Simon
June 20th, 2019 at 8:50 am
Morning. Do you have for a vz800 2004 marauder. The following parts?
51811-48E02-000 headlight housing
34111-25D00-000 Speedo cover under
June 20th, 2019 at 9:27 am
Sorry cant help with those Barry. Cheers Simon
July 1st, 2019 at 1:00 pm
Hi I’m trying to locate a alternator and drive assembly for my Suzuki RF900R 1997.
I would like to fit the older pre 95 units with the solid drive. The pre 95 GSXR 600/750 and the pre 95 GSXR 1100W are the same.
My contact isinfo 0275-108809 Cheers.
July 1st, 2019 at 6:37 pm
Hi Phil,
sorry I cant help with those as the alternators from those models in stock have all sold.
July 1st, 2019 at 11:26 pm
Hi, I have a 2007 Honda 750vt shadow, after the ecu and key?
grey 22 pin
thanks
July 2nd, 2019 at 9:18 am
Sorry I cant help with that one. I have a 2004 VT750 in stock but the ECU was missing when I purchased the bike.
July 7th, 2019 at 8:53 pm
Hi there I have recently purchased a Suzuki 1985 gsxr750-f that really needs new fairings or at least new belly pan, head light surround and engine side panels. Color I’m not worried about could even be slightly different year/model gsxr750.
Many thanks Ashley
July 7th, 2019 at 11:10 pm
Sorry cant help with those Ashley. Fairing panels for these models are getting hard to come by these days. Cheers
July 9th, 2019 at 8:26 pm
hi, i’m looking for front end for a 1992 svr 250 Yamaha, was wondering if the 1997 model was close to a 1992, plus after side covers. cheers steve
July 10th, 2019 at 8:34 am
Sorry cant help with those Steve. I had a small number of SRV250 parts but all have now sold.
July 18th, 2019 at 10:53 am
Looking for cb550 engine
July 18th, 2019 at 1:21 pm
Sorry cant help with that one. Cheers Simon
July 19th, 2019 at 3:20 pm
I’m looking for a rear guard for a 95 Triumph Thunderbird 900. I don’t suppose you’d have one, or could point me in the right direction? Cheers.
July 19th, 2019 at 5:15 pm
Sorry cant help with that one Mark. All I can suggest is to check Trademe Listings and see if anyone is currently dismantling one. Cheers Simon
July 24th, 2019 at 3:18 pm
Hey there! I don’t suppose you have a zxr/zzr 250 throttle cable by any chance?
July 24th, 2019 at 6:20 pm
Hi Cameron. The ZXR250 and ZZR250 are very different models, but I should have cables for both models in stock at $20 each plus postage. Please email me at goodpartsnz@gmail.com with details of the correct model and also if its the pull cable or return cable you need as they use two cables. Cheers Simon
July 24th, 2019 at 9:33 pm
Hi Simon
You put a comment on Tarbon Walkers trade me auction for CB400T. I am the new owner and after I get the bike delivered can I give you a list of the parts that I will need. I live in Auckland and i just drove through Rangiora this afternoon as I’m on holiday.
July 25th, 2019 at 10:01 am
Hi George. Once you know what parts you require, just email me at goodpartsnz@gmail.com and I will see if I can help. I have quite a few engine parts in stock, although I havent actually sorted through them yet, so unsure whats there. Cheers Simon
July 27th, 2019 at 9:09 pm
Hi iam looking for a Honda hornet cb600 2005 tail plastic any colour was wondering if 250cc models match
July 28th, 2019 at 12:04 pm
Hi Zerick. The 250 tail section looks to be the same as the 600, although I cant be sure. If you email me at goodpartsnz@gmail.com I can then send you some photos to compare. Cheers Simon.
August 7th, 2019 at 8:33 pm
He mate, I need, indicators, petrol tank, spidometer and the bit for a passenger feet fia a HONDA XLX250 1991
August 7th, 2019 at 10:04 pm
Sorry cant help with parts for that model.
August 9th, 2019 at 7:58 pm
Hello I’m looking for parts for a 1999 yzf r6 if there’s any parts avalible
August 10th, 2019 at 10:19 am
Sorry cant help with those currently.
August 21st, 2019 at 9:06 am
Hi, do you have carburettors for 1970 BMW R75/5 and any other parts for this model?
August 21st, 2019 at 1:36 pm
Sorry no parts in stock for that model. Cheers Simon
August 31st, 2019 at 4:50 am
Looking for carb and air filter for 1987 dr 200 suzuki Cheers Phil
August 31st, 2019 at 10:45 am
Sorry cant help with those Phil, as I only deal in road models. Cheers Simon
September 30th, 2019 at 10:30 am
I am Looking For a petrol tank Complete with working fuel pump and level sender, For a 1993 BMW K110
September 30th, 2019 at 10:46 am
Sorry cant help with that one.
October 1st, 2019 at 9:32 pm
Hi I am looking for a clutch basket for my 2003 GSXR 600 K2. That’s with needle bearing and all. I have plates that are good but my basket is damaged as well as the bearing. Thank you
October 1st, 2019 at 9:59 pm
Hi Ian, I have a complete clutch assembly from a 2001 GSXR600, but not sure if it will be the same as your K2 model. If you email me at goodpartsnz@gmail.com I can reply with a photo. Cheers Simon
October 29th, 2019 at 6:54 pm
Hi Simon George here from Auckland with the CB400 twin.
It has Hawk 11 on the side cover, I haven’t worked out yet what parts I need but both pistons are missing and 1 valve. Can you let me know if you have parts and I can search through the boxes that came with the bike and see what I need. The top end is dismantled and I would expect that there may be missing bolts etc.
I have about 25 old Hondas in my garage that I was hoping to restore but I found out collecting them is more fun than working on them.
Maybe now the weather is warmer I can spend more time in the garage.
My weekend ride is a Kawasaki ZL900 Eliminator.
Thanks George
October 29th, 2019 at 8:04 pm
Hi George,
I should be able to help with pistons at least and possibly valves. Please email me directly, at goodpartsnz@gmail.com and I will help if I can. Cheers Simon.
October 29th, 2019 at 8:04 pm
Hi George,
I should be able to help with pistons at least and possibly valves. Please email me directly, at goodpartsnz@gmail.com and I will help if I can. Cheers Simon.
November 11th, 2019 at 1:02 pm
Centre stand for 2008 dl1000 vstrom
November 11th, 2019 at 1:35 pm
Sorry cant help with that one.
November 18th, 2019 at 9:47 pm
looking for acomplet motor for a sv1000s
November 18th, 2019 at 10:00 pm
Sorry cant help with that one currently.
December 29th, 2019 at 5:36 pm
Hi Simon,
Looking for a 94 Yamaha FZR 1000 ignition coil pack please.
Cheers
December 30th, 2019 at 8:39 am
Hi. The closest I would have are coils from a 1990 FZR750 which ,may be the same. If you can email me at goodpartsnz@gmail.com I will reply with a photo for you to compare. Cheers Simon
December 30th, 2019 at 5:46 pm
Would you have a xv920 engine
December 30th, 2019 at 10:27 pm
Sorry cant help with that one.
January 11th, 2020 at 12:36 am
Hi there,
Do you have any parts a for 2007 Street Triple 675?
January 23rd, 2020 at 7:15 am
Hi
I have a RG150ES 1998 that has no plates on it , bike been sitting for 3 years bike runs ok but leaks fuel from carb and clutch is stuck bike has 71,000kms on it and body works in rough condition would this be some thing you would look at buying to wreak or is it too old
Cheers ( can send you photos if you like )
January 23rd, 2020 at 8:12 am
Hi Gary, I will likely be interested in the bike for dismantling, depending on price. Please email me at goodpartsnz@gmail.com with some details including photos if possible. Cheers Simon
March 7th, 2020 at 2:14 pm
Hi
I am looking to return my 2006 Kawasaki ZX10R Ninja back to its original state and am looking for a full twin muffler system.
I’m in Wellington. Hoping you can help out.
Thanks
Richard
March 7th, 2020 at 7:36 pm
Hi Richard, unfortunately the headers and the twin aftermarket mufflers from my ZX10R have sold, so I only have the collector/mid pipe sections in stock.
March 12th, 2020 at 7:00 pm
Hi im after for a 2006 XR250L ..a stator cover(has electric start) and plastic sproket cover ,Thanks
March 12th, 2020 at 9:05 pm
Sorry cant help with that one.
March 17th, 2020 at 8:52 pm
HI, I am after a suzuki fork brace to hold guard suitable for 1981 GS550….thx
March 18th, 2020 at 10:02 am
Sorry cant help with that one. Cheers Simon
March 25th, 2020 at 10:59 pm
Hi ya have you wrecked a 06 gxs1400 ? Mike 0272482133
March 26th, 2020 at 8:59 am
Hi Mike,
I have dismantled a GSX1400 K& although there are not many parts remaining in stock. Due to the Covid19 lockdown, I am unable to post parts while we are at level 4, but you are welcome to email me at goodpartsnz@gmail.com with details of what parts you are looking for. Cheers Simon
March 27th, 2020 at 12:54 pm
Hi
I have a 83 gs400. I’m looking for an exhaust just left side maybe both. Depending on price.
An the wheels these things have are hideous. Maybe if you could email me a couple photos of anything you have?
Cheers
.
March 27th, 2020 at 6:34 pm
Sorry cant help with those.
April 16th, 2020 at 5:48 pm
hi glenn here was hopping you would have a set of honda cbr600 1988 carbs
April 16th, 2020 at 7:33 pm
Hi Glenn, thanks for your enquiry, but sorry I cant help with those currently. Cheers Simon
May 1st, 2020 at 5:47 am
Hey mate, do you have a dash cluster for a mc19 cbr250r?
May 1st, 2020 at 1:07 pm
Hi Daniel. I can supply a complete dash assembly in good order from the MC19 at $120. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon
May 1st, 2020 at 2:15 pm
Hi looking for matching pair similar to this for racing Suzuki gsx550
On Fri, 1 May 2020 at 12:05 PM Good Parts Motorcycle Dismantlers wrote:
> Daniel commented: “Hey mate, do you have a dash cluster for a mc19 > cbr250r?” >
May 2nd, 2020 at 10:29 am
Not quite sure what you mean, but email me at goodpartsnz@gmail.com and I will see if I can help. Cheers
May 3rd, 2020 at 12:34 pm
Hi guys, I have a 99 XVS1100 Dragstar. I currently have Rider footplates that are worn down and want to change to foot pegs. Is this something you can assist with? After pegs and rubbers
May 3rd, 2020 at 1:45 pm
Sorry cant help with that one. Cheers
May 16th, 2020 at 8:02 pm
Hi simon am after a fuel tank for a 87 400x suzuki impulse cheers shayne
May 17th, 2020 at 11:05 am
Hi Shayne. I have one fuel tank in stock for the Impulse. The tank looks to have original paint, but will need repainting. A few paint chips etc and a couple of very small very shallow dents easily filled before repainting. No rust issues. If you email me at goodpartsnz@gmail.com I will supply more details including photos. Cheers Simon
May 18th, 2020 at 8:53 pm
hi guys, i’m after the handle bar clamps for the 1986 Suzuki Intruder 750. don’t need the risers. good chrome thanks and price please. freight to auckland.
Cheers
May 19th, 2020 at 9:23 am
Sorry all sold.
May 31st, 2020 at 6:47 pm
2004-2006 R1 Swing arm
May 31st, 2020 at 7:09 pm
Sorry I only have a 2008 R1 swingarm in stock currently.
May 31st, 2020 at 11:05 pm
Im looking for a few a fuel tank for a Suzuki dr250 1982
June 1st, 2020 at 1:10 pm
Sorry cant help with that one.
June 3rd, 2020 at 9:15 pm
How’s it bro I’m looking for a suzuki vl250 intreder starter motor please
June 3rd, 2020 at 10:44 pm
Sorry all sold.
June 9th, 2020 at 4:31 pm
Do you have any mt 07 body panels cheers matt
June 9th, 2020 at 10:44 pm
Sorry no MT07 parts in stock.
June 17th, 2020 at 9:49 am
Hey There, would you have a VL250 starter motor in stock ?
June 17th, 2020 at 10:21 am
Sorry all sold.
June 20th, 2020 at 10:45 am
Hi. I need a front rim for a 89 gsx600f please
June 20th, 2020 at 11:14 am
Hi Marcus. I dont think I can help, but it will depend on what type of rim the bike has. If you can email me at goodpartsnz@gmail.com I will see if I can help. Cheers Simon
June 28th, 2020 at 4:00 pm
Hi there won’t to build up cb400 halk how hard are the parts availablebilty on this bike
June 28th, 2020 at 8:04 pm
Hi. Parts are becoming hard to find for models like this, but as long as you have a good sound bike to restore, then you should be ok, although don’t expect to find everything you need straight away.
July 1st, 2020 at 3:19 pm
Hi there, I’m after a handlebar weight and bolt for my 2001 F650GS, can you help?
Cheers
René
July 1st, 2020 at 5:36 pm
Sorry cant help with that one.
July 4th, 2020 at 2:47 pm
Hi, I am looking for some parts for my XJ600. Can you assist or do you know of someone who may have parts from one of these?
July 4th, 2020 at 6:16 pm
Sorry, no parts in stock for that model currently.
July 19th, 2020 at 3:36 am
Hi have a Suzuki GS1100GK 1983
Looking for left hand side glovebox and the speaker covers
July 19th, 2020 at 11:11 am
Sorry cant help with those.
July 19th, 2020 at 9:50 pm
i am looking for a header pipe for a Suzuki Dr 250 1986
July 20th, 2020 at 10:13 am
Sorry I cant help with that one. Cheers
July 24th, 2020 at 7:33 pm
I need Jincheng AX100 regulator side covers and other parts, and I didn’t see it here, can you help me get it. please
July 24th, 2020 at 8:07 pm
Sorry I cant help with parts for that model and unfortunately have no idea who would stock these.
July 25th, 2020 at 9:29 am
Ktm 50 crank case
July 25th, 2020 at 10:09 pm
Sorry cant help with that one.
July 31st, 2020 at 9:46 pm
Hi I’m after a Bmw k 1100 exhaust system cheers
August 1st, 2020 at 10:02 am
Sorry cant help with that one.
August 6th, 2020 at 10:20 pm
Hi, I have an old 1980 Suzuki FR50 which I had been planning to restore. I last rode it about 15 years ago and I don’t think I will ever get around to restoring it now. Is this something that you would be interested in. I just want to get rid of it.
August 7th, 2020 at 10:02 am
Hi Craig,
thanks for your enquiry. Its not something that I’d normally deal in, but if you can email me at goodpartsnz@gmail.com with a photo (if that’s too much trouble) and how much you’d like to get for the bike as-is, we can go from there. Cheers Simon
August 9th, 2020 at 9:27 pm
Heya do you have a right hand brake lever for Gn250?
August 10th, 2020 at 10:07 am
Sorry cant help with a brake lever, but you will find that new aftermarlet levers are not expensive. Cheers
August 18th, 2020 at 4:41 pm
Hi, I’m looking for a rear brake pedal for a 2009 Suzuki SFV650 (Gladius), cheers
August 18th, 2020 at 6:20 pm
Sorry cant help with that one
August 19th, 2020 at 12:43 pm
Hi Simon
Have you got a preloved 180/55 Bridgestone Batlax t 30 available?
Thanks
Janosch
August 19th, 2020 at 5:39 pm
Sorry no. I have a 180/55×17 Michelin Pilot, but no Bridgestones currently
September 2nd, 2020 at 7:53 am
Do you have new Jincheng jc Simba rim for sale, I need it for my motorcycle
On Wed, Aug 19, 2020, 5:39 AM Good Parts Motorcycle Dismantlers wrote:
> goodparts commented: “Sorry no. I have a 180/55×17 Michelin Pilot, but no > Bridgestones currently” >
September 2nd, 2020 at 9:59 am
Sorry cant help with that one.
September 11th, 2020 at 3:31 am
Good afternoon. Can you please get me new blue paint Jincheng AX100 original side covers, v-rubber, dashboard and ignition.
September 11th, 2020 at 9:44 am
Sorry no parts in stock for that model.
August 29th, 2020 at 5:50 pm
Hi Simon
After a rear fender set for GPz 750 (84)
Available?
August 31st, 2020 at 8:57 pm
Hi Chris,
I have a rear mudguard from the aircooled GPZ750 model and possibly also one from the water cooled model. If you email me at goodpartsnz@gmail.com I can reply with details including photos. Cheers
September 5th, 2020 at 10:44 am
Hello,
After some bits for a VT250 Honda Magna.
Mufflers and fuel tank if you’ve got them.
Thank you, Dean
September 5th, 2020 at 11:23 am
Sorry Dean, all sold. Not many parts left from the Magna I dismantled. Cheers Simon
September 7th, 2020 at 10:40 pm
Hi
I’m looking for the rubber intake manifolds for a 1997 cbr1100xx carburetor model
Thanks
September 8th, 2020 at 9:59 am
Sorry I cant help with those currently.
September 15th, 2020 at 12:16 pm
Hi do you have the cylinder head from the 1978 GS750 available and if so how much please?
September 15th, 2020 at 1:55 pm
Sorry cant help with that one.
September 17th, 2020 at 1:58 pm
Hi I’m looking for a after market maltize cross tail light. Also a dash cluster for softail and a speedo
September 18th, 2020 at 12:26 am
Sorry I cant help with those.
September 25th, 2020 at 12:10 pm
hi simon, would you have a tank (condition not so important) for a S1 / S2 / S3 ?
Cheers, Jim
September 25th, 2020 at 1:38 pm
Sorry cant help with that one Jim. Cheers Simon
October 5th, 2020 at 7:27 pm
Hey there. I’m looking for a steering damper for a small non-bike related project.
Cheers
October 6th, 2020 at 9:12 am
Hi. I will have some factory steering dampers in stock. If you email me at goodpartsnz@gmail.com with any details regarding side etc, I will be able to reply with details including photos. Cheers Simon
October 23rd, 2020 at 10:43 am
Yas wouldn’t happen to have a zongshen carburetor would yas I think it’s a 200cc
October 23rd, 2020 at 12:55 pm
Sorry I cant help with that one.
October 9th, 2020 at 8:50 am
do u clutch cylinder cover for ktm sx 85cc.0221549701.cheerrs
October 9th, 2020 at 8:56 am
Sorry no.
October 18th, 2020 at 10:25 am
Hi iam looking for a water pump for a hyosung gt650r
October 18th, 2020 at 7:00 pm
Sorry I cant help with that one.
October 23rd, 2020 at 10:42 am
Yas wouldn’t happen to have a zongshen carburetor would yas I think it’s a 200cc
October 23rd, 2020 at 12:56 pm
Sorry I cant help with that one.
October 25th, 2020 at 11:48 am
Sorry guys its a YZF1000 Chunderace
Rog
October 25th, 2020 at 8:59 pm
Sorry I cant help with that one. Cheers Simon
November 2nd, 2020 at 5:15 pm
Hi, I am picking up shortly a 1983 Honda VF750 V4 Magna, that has been sitting unridden in a neighbour’s garage for 10 years or so, with a view to restoring it slowly…how are you off for parts for this model. I haven’t yet had a really good lokk at it to work out what needs doing. Any comments welcome. Cheers.
November 2nd, 2020 at 8:44 pm
Hi Adrian,
Sorry I dont have any parts in stock for the Magna, although some parts from the VF750S Sabre will likely be the same. The Magna models are becoming collectable, so if its a tidy example its probably worth doing. Cheers
November 3rd, 2020 at 2:01 pm
Hi, I’m looking for the joint sets or complete set of carbs for my CBR400RR (1990). Did you have any of these parts available?
November 3rd, 2020 at 5:50 pm
Sorry all carbs have sold currently.
November 18th, 2020 at 8:14 am
Hi
This is a bit of a long shot but I’m hoping you can help me.
I’m looking for a left hand switch block for a 1984 Kawasaki ZR400.
Cheers
Brendon
November 18th, 2020 at 9:43 am
Nothing in stock for that model but the switch block may be the same as other models of that era. If you email me at goodpartsnz@gmail.com possibly with a photo or two, then I will compare with what I have in stock. Cheers Simon
November 30th, 2020 at 1:36 pm
I am looking for rear Rotor Disc for Kawasaki z650 2017.
Please advise if you have it in stock.
Thanks
Bob
November 30th, 2020 at 6:03 pm
Sorry I cant help with that one.
December 13th, 2020 at 5:01 pm
Hi,
Do you have a set of 36 mm mikuni carbs to suit a rf900r? Cheers
December 13th, 2020 at 10:14 pm
Sorry, all sold currently.
December 13th, 2020 at 10:14 pm
Sorry I cant help with RF900 carbs currently.
December 14th, 2020 at 9:56 pm
Hi there, can you supply the points plate including points and drive cam for a gs450
December 14th, 2020 at 10:14 pm
Hi. Yes I can supply the complete assembly at $40 plus postage. If you email me at goodpartsnz@gmail.com I can provide details including a photo. Cheers Simon
December 20th, 2020 at 11:09 am
Do you have any dr650 parts?
December 20th, 2020 at 6:50 pm
Sorry no.
December 26th, 2020 at 6:02 pm
Hi Simon, after a clutch cable please for a 1982 CX500, right hand brake petal, and front/rear brake caliber set up please) and possible front/rear disks and rims if available I guess. I’m just not sure of what I have is workable to clean up, suspect just a clean down, but thought I would ask. Thanks anyway Simon.
December 27th, 2020 at 9:56 am
Hi Glenn,
Ive replied to your email but dont think I can help a great deal. Im a little confused regarding brakes as the CX500 has a drum brake at the rear, but let me know more details by email. Cheers Simon
January 1st, 2021 at 1:22 am
Hello I have a 1984 Honda CX500, just wondering if you have any of them lying around , I am looking for a few parts
January 1st, 2021 at 11:18 am
Hi Daryl. I will reply to your email. Cheers
January 7th, 2021 at 5:30 pm
Hi I’m chasing a chock insert on a 1987 K100 BMW Its the small round plate which indicates which direction to turn the chock lever .
January 7th, 2021 at 8:17 pm
Sorry I cant help with that one.
January 10th, 2021 at 2:19 pm
Both Front Turn Signal indicators for r1100r complete other than the wiring, Or similar ones that will fit
Have supplied the real OEM parts link as as web url
these were on a lot of models around that time
Thanks for looking and happy 2021
January 10th, 2021 at 6:18 pm
Sorry nothing suitable in stock. Cheers
January 13th, 2021 at 3:45 am
Hello im looking to buy some 2003 Suzuki gsx250 invader parts if available thanks
Please contact me on 0212580723
January 13th, 2021 at 8:36 am
Hi David. Email enquiries are preferred. Please email me at goodpartsnz@gmail.com with details of what parts you are looking for. Cheers Simon
January 15th, 2021 at 1:16 am
Hi there im looking for a rear brake pedal for a Gv250
January 15th, 2021 at 8:20 am
Hi Dylan. Yes I can supply a brake pedal from a 2010 GV250 in good order at $40 plus postage. If you email me at goodpartsnz@gmail.com I can provide further details. Cheers Simon
February 3rd, 2021 at 4:07 pm
Just wanting a clutch diaphram unit for 87vfr700. The small box seal that goes on the handle bars. Have bled it once but seal is cracked
February 3rd, 2021 at 8:32 pm
Sorry I cant help with that one.
February 7th, 2021 at 2:09 pm
Hi would you have a reg/rectifier to fit to a 99 gsxr750 ?
February 7th, 2021 at 9:21 pm
Sorry I cant help with that one.
February 23rd, 2021 at 12:40 pm
Hi I see you have a vt1100 for parts on trade me, I have a 1995 vt 1100 ace, I’m looking for a battery side cover, can you help, thanks Ian.
February 23rd, 2021 at 12:53 pm
Sorry Ian, all sidecovers have sold
February 23rd, 2021 at 2:48 pm
Hi i think this is gone wrong person and I like to know do have a Yamaha Virago speedo vt 250 etc thanks
Get Outlook for Android
________________________________
February 23rd, 2021 at 6:40 pm
Sorry about that :). I do have a Yamaha Virago XV250 speedo in stock, although its very different to a VT250 speedo assembly. If you email me at goodpartsnz@gmail.com I can send some photos. Cheers.
February 27th, 2021 at 6:05 pm
Hi there, looking for a rear shock for a 2006 gsf1200k bandit.
Cheers
March 2nd, 2021 at 4:47 pm
Sorry I cant help with that one. Cheers
March 19th, 2021 at 5:53 pm
Hi , do you have a good fcr39 carb to suit a 2020 drzsm400 ?
Cheers
March 19th, 2021 at 7:00 pm
Sorry no
March 22nd, 2021 at 1:53 pm
Hey mate. I’m after 84 TS185 stator please?
March 22nd, 2021 at 7:25 pm
Sorry I cant help with that one.
March 22nd, 2021 at 2:10 pm
Do you guys have by any chance a 1993 vf750 right side exhaust
March 22nd, 2021 at 7:26 pm
Sorry no.
March 22nd, 2021 at 10:00 pm
Hi was wondering if you were wrecking any suzuki sv650 naked version k3 and up. Im after a right hand switch block, throttle tube, throttle cables and front brake lines cheers
Jim
March 23rd, 2021 at 8:21 am
Sorry no naked model SV650 parts in stock.
March 23rd, 2021 at 12:53 pm
Hi. Im looking for a rear indicator assembly for a BMW R1100S.
(I’ve also contacted you through your email address)
March 23rd, 2021 at 7:13 pm
Sorry I cant help with that one.
March 31st, 2021 at 2:15 pm
Need a master cylinder with brake switch for a 1981 gsx 400 twin
March 31st, 2021 at 9:05 pm
Hi Trev, nothing in stock from that particular model, but they were much the same as the GN250 (calipers also the same so master cylinder may be identical). I will have one of a similar design, except the outlet for the brake hose is on the inner end of the reservoir, not facing forward like the GSX400E master cylinder. If you email me at goodpartsnz@gmail.com I can send you photos to view. Cheers Simon
April 3rd, 2021 at 1:14 pm
Hi there, Do you have any honda cbr400rr nc23 parts, thanks.
April 3rd, 2021 at 9:00 pm
Yes I have dismantled several of this model, although many parts have sold. If you email me at goodpartsnz@gmail.com with details of what parts you are looking for, I will see if I can help.
April 16th, 2021 at 3:24 pm
Looking for belly pan for 06 zx6r
April 16th, 2021 at 8:30 pm
Sorry I cant help with that one.
April 18th, 2021 at 10:29 am
Hi
Do you have a muffler for a Honda 550 four 1977 motor bike.
Cheers
Mark
April 18th, 2021 at 10:38 am
Sorry no
April 27th, 2021 at 10:11 am
Hi, looking for a crankcase or even just the lower half for a 1997 Honda CBR1100xx. Thanks.
April 27th, 2021 at 10:29 am
Sorry I cant help with that one.
April 29th, 2021 at 3:17 pm
Hey wanting a pair of air tubes and the grill/fairing graves that go inside/ontop of the side fairings for a zxr250c
April 29th, 2021 at 8:05 pm
Sorry I cant help with those Chris.
May 12th, 2021 at 10:40 pm
Do you have sidecovers for honda magna 1986. Need the right hand side.
May 13th, 2021 at 9:19 am
Sorry nothing in stock for that model
May 24th, 2021 at 12:32 pm
Hi I’m looking for a rf900 left front shock
June 3rd, 2021 at 6:48 pm
Hi would you have a choke cable for 1988 Honda vf 750 CJ cheers
June 4th, 2021 at 10:14 am
Sorry no.
June 4th, 2021 at 11:08 am
Hi would you have a rear brake reservoir for a 99 YZFR6?
June 4th, 2021 at 11:32 am
Sorry no
June 5th, 2021 at 3:28 pm
Hi I’m after a good working front brake caliper for a dr 200 how much thanks jeff
June 5th, 2021 at 8:34 pm
Sorry I cant help with that one. I only deal in road models. Cheers
June 23rd, 2021 at 2:34 pm
Hi can you supply a front fender for a xt660x in black please
June 23rd, 2021 at 6:56 pm
Sorry I cant help with that one. Cheers
June 25th, 2021 at 2:21 am
Hi I’m after a front flaring for a 2005 gsxr 1000 suzuki could you help if so hw much all up to send to napier thanks
June 25th, 2021 at 9:50 am
Sorry I cant help with those.
June 26th, 2021 at 3:48 pm
Looking for an after market full exhaust with muffler for a yzf r15 v3 year 2020
June 26th, 2021 at 4:01 pm
Sorry I cant help with that one. Cheers
July 14th, 2021 at 7:49 pm
Hi guys wouldnt have any suzuki pe175 parts ? I’m currently restoring a 1984 model and am after a few bits. Cheers aidan
July 14th, 2021 at 10:28 pm
Sorry nothing in stock for that model.
July 19th, 2021 at 10:28 pm
Hi guys
I asked the question about the forks on T/M for the K1150 I am keen on the $300.00 price so could you go ahead with it. I will pay for it or a deposit. I will not take them yet because I think I will need more parts. I picked up a Corroded Rockster and am yet to pull it down. A email address and phone number would be good. Cheers.
July 20th, 2021 at 9:15 am
Hi Ken. Thanks for your enquiry. Email is the best method of communication, so just email me directly, at goodpartsnz@gmail.com and we can get the ball rolling. I will put the R1150RT forks aside for you. Cheers Simon
July 23rd, 2021 at 10:24 pm
Hi Ken. Im not sure if Ive replied to this or not, but please email me at goodpartsnz@gmail.com to sort out the details. Cheers Simon
July 20th, 2021 at 9:28 pm
Hi , I am looking for a dl650 abs rear break sensor? Please can you assist
July 21st, 2021 at 10:30 am
Sorry I cant help with that one.
July 26th, 2021 at 7:39 pm
Hi there I was inquiring about your 850 special for sale on trademe and do you trade bikes if you want more info or pics let me know
July 26th, 2021 at 8:43 pm
Hi Geordie. Thanks for your enquiry. I would prefer a straight sale, and my other alternative was to dismantle the bike and sell as parts, which would likely net a greater price overall. You are welcome to email me at goodpartsnz@gmail.com if you wish to discuss a possible trade. Cheers Simon
July 31st, 2021 at 6:01 pm
Do you have a yoke fitting for a GB 400/500 and if so how much?
July 31st, 2021 at 6:02 pm
Sorry all sold.
August 13th, 2021 at 9:18 am
Hi, Im looking for a gsr750 headlight assembly but mainly just the inner reflector if un-damaged.
Thankyou
August 13th, 2021 at 3:27 pm
Hi Chris. I will have a complete headlight assembly from a 2007 GSR600 in stock which think is the same as the 750. I’m away for a few days, but if you email me at goodpartsnz@gmail.com I will reply with details including photos, when I return. Cheers Simon
August 17th, 2021 at 8:16 pm
Hi looking for a radiator for a suzuki rf900.
Wonder if you have anything available? Condition and price
Thanks John
August 18th, 2021 at 6:40 pm
Hi John. I have a couple of RF900 radiators in stock. Both came from running bikes with no signs of fluid leakage etc. The will have the usual flattened fins in the centre on the lower area, but otherwise they are in tidy order. Not sure if you also need the fan or not, but if you email me at goodpartsnz@gmail.com I can reply with details including photos. Cheers Simon
August 18th, 2021 at 6:51 pm
l have a complete 91 zx2r black would you be interested in it ?
August 18th, 2021 at 6:54 pm
Hi Dameon. Please email me at goodpartsnz@gmail.com with some details (possibly photos of possible) and we can then discuss. Cheers Simon
August 23rd, 2021 at 3:00 am
Hi there, I’m looking for a CDI for a 91 DR650esr.
Cheers, Aidan.
August 23rd, 2021 at 11:13 am
Sorry no.
September 2nd, 2021 at 7:34 pm
Hi ,looking for a 1989 cbr250 front flaring twin headlight
September 2nd, 2021 at 8:20 pm
Sorry I cant help with that one.
September 5th, 2021 at 11:04 am
Hi after rear wheel spoked tank and mufflers for a 1978 r100/90 cheers.
September 5th, 2021 at 7:49 pm
Sorry I cant help with those.
September 12th, 2021 at 12:08 am
any gsxr 1000 muffler , 2001 ,or 2012 to 2015? thanks
September 12th, 2021 at 7:17 pm
Sorry I cant help with that one.
September 22nd, 2021 at 4:31 pm
Hi
I am wondering if you have any 58mm OD BMW tank badges?
Kind regards
September 22nd, 2021 at 10:25 pm
Sorry I cant help with that one.
September 22nd, 2021 at 11:18 pm
Hi there, do you have the front rim for a GN250? cheers
September 23rd, 2021 at 10:17 am
Hi. I can supply a front mag wheel for the GN250 at 4100 plus postage. If you are interested, please email me at goodpartsnz@gmail.com. Cheers Simon
September 26th, 2021 at 12:39 am
Hi Mike. Apologies if I’ve already asked.
After kawasaki 1991 gpz500s gearbox parts.
1988 Kawasaki gpz 600 mufflers manifold and clutch parts . Also fairings.
1988 kawasaki gpx 600 mufflers & manifold
Apparently Gpz 400 is the same size engine (smaller bores etc) for clutch slave parts
Thanks
Troy
September 26th, 2021 at 9:11 am
Sorry I cant help with those. Cheers Simon
October 2nd, 2021 at 12:01 pm
Hi looking for a right clip on handlebar 07
hyosung 250R
October 2nd, 2021 at 1:08 pm
Sorry all sold currently.
October 5th, 2021 at 8:09 pm
Have you got parts for cb400 91 currently.
October 5th, 2021 at 8:15 pm
Hi. i have a few parts from a 1995 CB400. Not a great deal left, but if you email me at goodpartsnz@gmail.com and let me know what parts you are looking for, I will help if I can. Cheers
October 6th, 2021 at 7:21 pm
Hi Simon I’m waiting to get my gsx certification for sidecar so starting my next project do you have a complete exhaust system for a gn250 1982 cheers Darren McKinnon
October 6th, 2021 at 10:10 pm
Sorry Darren, all GN250 exhausts have sold currently. Cheers Simon
October 16th, 2021 at 6:49 pm
Hi looking for 02 r1150r single spark coil pack .
Regards Dean
October 16th, 2021 at 7:23 pm
Sorry I cant help with that one. Cheers
October 25th, 2021 at 8:24 pm
Hey mate have you got ecu and matching keys for cb900 hornet
October 25th, 2021 at 8:47 pm
Sorry No.
October 26th, 2021 at 9:08 pm
Hi just wondering if you have wrecked a Honda ST 1300 02-10 I’m after a fuel hose
October 27th, 2021 at 8:39 am
Sorry I cant help with that one.
November 7th, 2021 at 9:54 am
Do you have any BMW G650gs parts? Particularly a instrument cluster and skid plate?
November 7th, 2021 at 6:00 pm
Sorry no
November 8th, 2021 at 3:55 am
Hey there I’m after a gsxr1000 k9 frame brought a crashed clean plate gsxr there are two holes one on each side of the frame from handle bar stoppers… Looking at how much to buy the main frame section and have it shipped to Christchurch.
Cheers Scott Radford
November 8th, 2021 at 8:46 am
Hi Scott, sorry I cant help with that one.
November 9th, 2021 at 5:32 pm
Looking for parts 1998 kawasaki 750 zephyr
November 9th, 2021 at 7:05 pm
Sorry nothing in stock for that model.
November 12th, 2021 at 10:52 am
Hello would you have a left hand fork for a Crf150f. I am only after the chrome fork tube so if u only have a right hand one would be fine
Same tube from 03 to 2017
November 12th, 2021 at 8:47 pm
Sorry I cant help with that one.
November 18th, 2021 at 10:42 am
I see you have a ‘97 xj900 Yamaha listed… do you have the rear mono-shock for it… if so do you think it’s in reasonable condition? Price?$$
November 18th, 2021 at 1:46 pm
Hi, I’m after a rear tail light lense for a 1980 SUZUKI GSX1100. Can you help?
November 19th, 2021 at 7:51 pm
Sorry I cant help with that one.
November 19th, 2021 at 11:00 am
Looking for a hall sensor and coil for a 1999 r1100gs
November 19th, 2021 at 11:20 am
Sorry all sold
November 19th, 2021 at 8:33 pm
Hi there looking for a top triple clamp for a Suzuki sfv 650 gladius 2011
November 19th, 2021 at 8:36 pm
Sorry I cant help with that one.
November 20th, 2021 at 8:09 pm
hi
Looking to track down a 11mm rear master cylinder off a yz 450 to fit to a dr 650.
November 21st, 2021 at 8:15 am
Sorry I cant help with that one.
November 24th, 2021 at 2:55 pm
Hi do you have ignition coil for a 2009 gt250r carb thanks
November 25th, 2021 at 8:42 pm
yes I can supply a coil with lead and plug cap at $40 plus postage. Please email me at goodpartsnz@gmail for details. Cheers
November 29th, 2021 at 5:04 pm
Hi do you have a stator to suit a 05 klx 300
November 29th, 2021 at 6:33 pm
Sorry no. I only deal in road model parts.
November 30th, 2021 at 2:46 pm
Hey there I am looking for a good set of 34 mill flat slide mikuni carbs for a aircooled GSXR 750 Suzuki can you help out
November 30th, 2021 at 9:40 pm
Sorry I cant help with those.
November 30th, 2021 at 8:13 pm
SWM Superdual 650 2017 – after a TPS
Cheers
November 30th, 2021 at 9:35 pm
Sorry I cant help with that one.
December 3rd, 2021 at 12:30 pm
Hi , I’m looking for the magneto cover xr, xl 400 -500 79 ish
December 3rd, 2021 at 6:24 pm
Sorry I cant help with that one. Cheers
December 11th, 2021 at 5:54 pm
Hi Simon, l am after a starter motor for a honda mc22 cheers.
December 12th, 2021 at 1:29 pm
Hi Barry. Yes I have one at $80 plus postage. if you email me at goodpartsnz@gmail.com I can supply further details. Cheers
December 12th, 2021 at 3:30 pm
Hi there. Just wondering if you’ve got a set of front footpegs for a Suzuki SFV650?
Thankyou.
December 12th, 2021 at 9:06 pm
Sorry I cant help with that one.
December 12th, 2021 at 5:22 pm
Hi there, after front hub for pe175 1980 model, also after various other things, Cheers.
December 12th, 2021 at 9:06 pm
Sorry nothing in stock for that model.
December 21st, 2021 at 8:14 am
Hi
Looking for virago 250 frame thats still alive.
December 27th, 2021 at 10:35 pm
Hi there I’m looking for a crankshaft for a 2000 bmw f650gs
Cheers mark
December 28th, 2021 at 10:03 am
Sorry no
December 28th, 2021 at 7:28 pm
Hi there I’m after a hyosung gt205r rear sprocket
December 29th, 2021 at 9:10 am
Sorry I cant help with that one.
January 3rd, 2022 at 2:26 pm
Kawasaki ninja 2008 clutch push rod
January 3rd, 2022 at 2:33 pm
Sorry no.
January 5th, 2022 at 2:25 pm
Hi, looking for a front brake repair kit for a GT500 Susuki (1976 ?) Any chance.
January 5th, 2022 at 9:54 pm
Sorry I cant help with that one.
January 5th, 2022 at 8:44 pm
Have u got a tank in black for a 2003 xv250 virago? If so how much including freight to invercargill? Thanks
January 5th, 2022 at 9:54 pm
Sorry no XV250 tanks in stock.
January 14th, 2022 at 2:46 pm
Hi perspex window screen for motorcycles do you have any I want one for my mobility scooter thanks Owen
January 14th, 2022 at 4:18 pm
Hi Owen. You will need quite large screen for a mobility scooter, and I don’t think I have anything suitable in stock. Probably an aftermarket type screen for a cruiser would suit, but I don’t have anything like that. You’d also need to make your own mounts. Might be easier to buy a screen that’s designed for fitting to a mobility scooter.
January 20th, 2022 at 4:14 pm
Happy New Year All,
Have you got any RX125 Yamaha parts by any chance? I’m after the two rear indicator light assembly’s. Thanks heaps! Cheers!
January 20th, 2022 at 5:53 pm
Sorry I cant help with those.
January 29th, 2022 at 7:39 am
Hi there. I’m after rear left and right indicators complete for a 1986 RC24 vfr interceptor. Thanks mike
January 29th, 2022 at 8:34 am
Sorry I cant help with those.
January 30th, 2022 at 8:17 pm
Looking for a 1990 zzr 400 primer/fuel tap
January 31st, 2022 at 8:38 am
Hi Trent. I can supply one of these at $30 plus postage. If you email me at goodpartsnz@gmail.com I can then reply with details including a photo. Cheers
February 5th, 2022 at 4:28 am
Hi, would you by any chance have the headlight assembly for 2009-2012 Yamaha R1?
February 5th, 2022 at 8:12 am
Sorry no
February 19th, 2022 at 12:18 pm
Hi there, just after price and availability on a tail light for a 2009 Suzuki Gladius any help would be appreciated.
Regards
Corey Alchin
February 19th, 2022 at 3:02 pm
Sorry I cant help with that one.
February 21st, 2022 at 8:09 am
Hi am after a frame for a “84 ish BMW K100 please , cheers mike
February 21st, 2022 at 8:37 am
Sorry I cant help with that one.
February 25th, 2022 at 7:26 am
Hi there, looking for a rear wheel, rear light assy and rear mudguard for a 2007 Yamaha XT660R.
Cheers Ray
February 25th, 2022 at 7:40 am
Sorry I cant help with that one.
February 27th, 2022 at 4:04 am
Hi
I’m after parts for a rmx250
1991 plastics mainly
Thanks David
February 27th, 2022 at 10:12 am
Sorry i cant help with those as I mainly deal in road model parts.
March 2nd, 2022 at 12:20 pm
Hi there, I’m after a gear shifter foot lever for a 1985 Bmwk100. Do you have any? Brendon 0211487545
March 2nd, 2022 at 12:40 pm
Sorry all sold
March 4th, 2022 at 3:29 pm
Hi
I’m after a rear luggage rack & fittings for a Suzuki Intruder 250VL – 2012 model. Cheers & thanks.
March 4th, 2022 at 8:55 pm
Hi Monika. Ive just sold the only set I had to Paul at MotoMox in Kaiapoi. I have a suspicion they are for you 🙂
March 9th, 2022 at 12:31 pm
Hi, I am looking for a charging rotor on a Honda cb650 custom.
Regard
Dirk
March 9th, 2022 at 7:33 pm
Sorry I cant help with those, as all sold.
March 10th, 2022 at 6:21 am
Do you have any front brake disc’s for a Cbr900rr?
March 10th, 2022 at 8:32 am
Sorry no.
March 14th, 2022 at 6:33 pm
Hi I have a Aprilia RSV Trono I’m wantind rear red tail light cover front foot peg and the mount that holds the foot peg I be able to send photo of parts I want tomorrow if you have a Aprilia around the year 2004 if and you can help it would be good regards Steven Woodgate
March 14th, 2022 at 8:35 pm
Sorry I cant help with those.
March 27th, 2022 at 10:03 pm
Looking for a seat and fuel tank for a suzuki ts185
March 28th, 2022 at 8:59 am
Sorry I cant help with those.
March 29th, 2022 at 3:27 pm
Hi. I’m chasing a front break reservoir for a 2006 SV1000
March 30th, 2022 at 3:36 pm
Hi looking for a damaged bmw s1000rr fuel tank 2015-2019
March 30th, 2022 at 4:44 pm
Sorry I cant help with that one.
April 2nd, 2022 at 3:00 pm
Hi, looking for seat for 2008 suzuki c90t boulevard.
Any chance you have 1 on the shelf.
Thanks Tony
April 3rd, 2022 at 10:50 am
Sorry I cant help with that one.
April 3rd, 2022 at 2:21 pm
Hi there, I’m after a petrol cap for a Yamaha XVS 1100 ..my bike is a 2000. I’m not sure if other years before or after will be compatible. Maybe generic??
Do you have one in stock ?
Cheers
Brendon
On Sun, Apr 3, 2022, 9:50 AM Good Parts Motorcycle Dismantlers wrote:
> goodparts commented: “Sorry I cant help with that one.” >
April 3rd, 2022 at 6:19 pm
Sorry nothing suitable in stock. Cheers
April 3rd, 2022 at 2:12 pm
Hello, I am after a GSF250 rear shock for my Bandit of 1996, I don’t mind if it’s well used, as long as it doesn’t leak, Thanks, Leon
April 3rd, 2022 at 6:18 pm
Hi Leon. I have a rear shock from a 1996 Bandit 250V in stock. Good tidy order with no sign of fluid leakage. $100 plus postage. If you email me at goodpartsnz@gmail.com I will reply with details including a photo. Cheers Simon
April 4th, 2022 at 12:31 pm
I am looking for Kawasaki Balius rear wheel.
April 4th, 2022 at 6:32 pm
Hi. I have a 400×17 rear wheel from a Kawasaki Balius in stock at $200 plus shipping. If you email me at goodpartsnz@gmail.com I can then reply with details including photos. Cheers
April 4th, 2022 at 3:54 pm
Hey there, would you have a bandit 1200cc engine and carbs?
April 4th, 2022 at 6:37 pm
Sorry Matt, all Bandit 1200 engines have sold currently.
April 5th, 2022 at 1:24 pm
Thanks, how about a oil cooled GSXR1100 engine?
April 5th, 2022 at 3:02 pm
All .long gone sorry.
April 7th, 2022 at 10:34 pm
Price and availability of exhaust headers for 04 xr400
April 8th, 2022 at 9:19 am
Sorry I cant help with those as I only deal in road models
April 12th, 2022 at 7:23 pm
After a headlight plastic surround for a Yamaha xt660z 2008-2016
April 12th, 2022 at 7:25 pm
Sorry no parts in stock for that model.
April 13th, 2022 at 4:04 pm
Hi mate, do you have crash guards (front and rear) for a 2007 Suzuki Boulevard C90 VL1500? Also a riders backrest?
Cheers Col
April 14th, 2022 at 9:37 am
Sorry I cant help with those currently. Cheers
April 22nd, 2022 at 9:16 am
APRLLIA RSV MILLE R fork stanchion required. Pete 0220431086
Cheers
April 22nd, 2022 at 9:50 am
Sorry I cant help with that one currently.
April 26th, 2022 at 10:36 am
Hey I’m looking for a K100, K1100 or a K1200 bmw head eith all the bits (injectors, loom, etc). Wouldn’t have one by any chance?
Cheers
Matthew
April 26th, 2022 at 10:50 am
Sorry Mathew, these have all sold. Cheers
May 1st, 2022 at 10:49 am
Hi there, I’m looking for a fuel pump for an 87 ns250r. Would you have any of these in stock?
Cheers, Matty
May 2nd, 2022 at 10:32 am
Hi Matty. Nothing in stock from the NS250R, but from memory they used the same type of low pressure fuel pump that many other models also used. I will have a fuel pump from an FZR250 which is a 2 wire plus and has both inlet and outlet pipes coming from one end of the pump body. If you email me at goodpartsnz@gmail.com I can reply with details including photos. Cheers Simon
May 5th, 2022 at 3:39 pm
Hi. I’m after an aftermarket exhaust system for a suzuki boulevard m90 2009.
May 5th, 2022 at 4:40 pm
Sorry nothing in stock currently.
May 6th, 2022 at 2:55 pm
Hi there im looking for a headlight assembly for a BMW 1200 GS thanks.
May 6th, 2022 at 8:36 pm
Sorry I cant help with that one. Cheers.
May 8th, 2022 at 9:46 am
Hey mate would you have a chain for a 1200 2003 Suzuki bandit
May 8th, 2022 at 6:19 pm
Sorry no.
May 16th, 2022 at 6:38 pm
Hello,
Do you have a cdi for a 84 honda atc 200es ?
Thanks
May 16th, 2022 at 8:09 pm
Sorry no
May 19th, 2022 at 10:28 am
morning you wounldnt have a cdi and the coils for a 750 Suzuki intruder
May 19th, 2022 at 10:55 am
Hi Hayden. I have these in stock and will answer your email.
May 24th, 2022 at 10:51 pm
Hi I’m looking for a drz400 engine do you perhaps have anything.
May 24th, 2022 at 11:06 pm
Sorry I cant help with that one.
June 16th, 2022 at 11:37 am
Hey Guys,
Do you still have any NS400R parts available?
Steve. 021750315
June 16th, 2022 at 1:12 pm
Hi Steve. I do have some parts in stock although many parts have sold. Best option is to email me at goodpartsnz@gmail.com with a list of parts you are looking for. Cheers Simon
June 18th, 2022 at 10:09 am
Hi there
Do you carry any parts for a 1976 BMW R90/6
Thanks Nick
June 18th, 2022 at 10:15 am
Sorry no
June 19th, 2022 at 5:05 pm
Looking for a throttle cable for a BMW 2006 F650 GS ? Thanks ,
June 19th, 2022 at 6:39 pm
Sorry I cant help with that one.
July 14th, 2022 at 4:30 pm
Hi,
I’m after a set of carbs and the airbox for t
a 1990 to 1993 Honda VFR750F. Are both items all complete and can you please send any pics you have of them?
Thank you
Simon
July 14th, 2022 at 5:18 pm
Both and completely dismantled with the majority of parts now sold.
July 14th, 2022 at 5:19 pm
Sorry carbs and airbox are sold
August 30th, 2022 at 5:08 pm
Hello. Yamaha FJ1200.
I’m looking for a left side exhaust, left side riders foot peg, and a left side handle bar. Can you help? 0220972322
August 30th, 2022 at 7:17 pm
Hi Steve. I definitely dont have a muffler, and dont think I have a LH handlebar or footpeg, but will have a look tomorrow and let you know.
September 6th, 2022 at 1:58 pm
Hi, mirrors for a 2016 yamaha yzf 15f?
Cheers
September 6th, 2022 at 6:55 pm
Sorry no.
September 19th, 2022 at 4:44 pm
Hi I’m looking for a cdi unit for gt250r thank you
September 19th, 2022 at 7:37 pm
Hi Ibey,
I can supply a CDI for the carb model GT250R at $100 plus postage. If you email me at goodpartsnz@gmail.com I can reply with details including a photo. Cheers Simon
September 24th, 2022 at 11:36 pm
Motor and carburetor available? From FZX250 or FZR250
September 25th, 2022 at 1:02 pm
Hi. I have parts in stock from both the FZR250 3LN and the Zeal, but they are not identical. If you email me at goodpartsnz@gmail.com letting me know what model you require parts for, I’ll help if I can. Cheers
October 5th, 2022 at 6:42 pm
Hi, I’m after the Ignition switch for a 2002 GSX1400
October 5th, 2022 at 6:49 pm
Sorry I cant help with that one.
October 8th, 2022 at 11:08 pm
Hey. I’m after some wheels & forks for a bobber build. Got a GSXR 750 motor to run in it so looking for wheels off something a similar size to a 750 or 1000 if there’s even a difference. I think they’re like 17×5.5 rear & 17×3.5 front. What have you got?
October 9th, 2022 at 8:29 pm
Hi Chris, I should have something suitable in stock. please email me at goodpartsnz@gmail.com with some details, and I will get back to you ASAP. Cheers Simon.
October 10th, 2022 at 3:27 pm
Hi, I’m looking for some passenger foot pegs and the rear panel the covers the seat release handle for a 2000-2007 f650gs
October 10th, 2022 at 8:07 pm
Sorry I cant help with those.
October 13th, 2022 at 11:45 am
hello i am looking for a clutch cover for cbr600rr 04 do u have anything that can work thankyou regards
kane 0224933550
October 13th, 2022 at 7:01 pm
Sorry I cant help with that one.
October 17th, 2022 at 11:31 am
Gidday ..
I’m on the hunt for a road usable DR650 21inch front wheel
Regards
Paul C
October 17th, 2022 at 12:37 pm
Sorry no DR650 parts in stock. Cheers Simon
November 2nd, 2022 at 2:08 pm
Hey after a set of forks for a 98 gs500e
And the rear plastics?
November 2nd, 2022 at 4:21 pm
Sorry all sold
November 9th, 2022 at 4:21 pm
1981 Suzuki B120 rear rank bolts, they’re small, 8-10 mm screw into frame.
November 9th, 2022 at 5:17 pm
Sorry I cant help with those.
November 17th, 2022 at 5:33 pm
Looking for either Highway or Crash Bars to suitmy Suzuki boulevard m90 2009
November 17th, 2022 at 8:15 pm
Sorry I cant help with those. Cheers
December 5th, 2022 at 2:19 pm
Hi there im looking for a GN 250 SUZUKI ENGINE THAT RUNS PLEASE
December 5th, 2022 at 6:23 pm
Hi. I have a 2005 GN250 engine with only 6100km on the clock. The bare engine (without starter motor and carb) suitable as a transplant is available at $500 plus shipping. Please email me at goodpartsnz@gmail.com if you are interested. Cheers Simon.
December 5th, 2022 at 7:08 pm
Can you please send photos and phone number please ill buy the engine if it works and how much is shipping i live in hamilton
December 6th, 2022 at 10:44 am
If you can email me at goodpartsnz@gmail.com I can then reply with details including photos. Engine is in very good order and was running before the bike was dismantled. Shipping with BikeTranz would be $100.
December 12th, 2022 at 5:56 pm
Hey there, wouldnt happen to have an early model R1 front seat by any chance please?. If so chuck me a price if poss, and for ref 99-02, can mail me or drop me a text on 021 0404266, thanx and Merry Christmas.
December 12th, 2022 at 9:02 pm
Sorry I cant help with that one.
December 19th, 2022 at 5:35 am
Heya. Looking for a pgo scooter starter relay?
December 19th, 2022 at 8:33 am
Sorry no scooter parts
December 19th, 2022 at 8:07 pm
Hi, I’m after a crankcase cover for a bmw k1200rs
Thanks in advance.
December 20th, 2022 at 8:52 am
Sorry I cant help with that one.
January 3rd, 2023 at 10:05 am
Hi, looking for an ECU for F800st ? Thanks
January 3rd, 2023 at 6:02 pm
Sorry I cant help with that one.
January 18th, 2023 at 9:16 pm
Have you got a petrol tank for a 1987 Honda vfr n21 400 cheers Steve
January 19th, 2023 at 8:06 am
Sorry no.
February 3rd, 2023 at 3:41 pm
Hi just wondering if you would be interested in buying my bike GSX750R I think it’s a 1986 missing a few bits. And I am in Hamilton
February 3rd, 2023 at 4:35 pm
Hi Paul. Unfortunately, I’m down in Canterbury so the cost of shipping would likely make it uneconomical for me. However, feel free to email me directly at goodpartsnz@gmail.com with some details including a photo or tow. Cheers Simon
February 11th, 2023 at 4:12 pm
Hi I’m after a AC Generator and a Regulator for a Suzuki gsx750 esd 1986. I was wondering if you had any of these parts . Cheers.
February 11th, 2023 at 5:34 pm
Sorry I cant help with either of those currently.
February 14th, 2023 at 7:22 pm
Hi, would you have a handlebar cross brace for a dirt bike with the foam padding protector.
Cheers Steve
February 14th, 2023 at 7:28 pm
Sorry I don’t deal in off road model parts.
February 18th, 2023 at 7:30 am
Hi I’m looking for a master cylinder for a 1984 bmw k100
February 18th, 2023 at 8:27 am
Sorry nothing in stock currently.
February 20th, 2023 at 8:29 pm
Hi I’m after a kz750 or gpz750 sump and oil cooler set up If available, cheers
February 21st, 2023 at 8:19 am
Sorry nothing suitable in stock.
February 23rd, 2023 at 1:52 pm
Hi I was looking for some second hand gold forks for the latest Yamaha 2022 mt10sp Have you any suggestions? Cheers Phil
February 23rd, 2023 at 2:31 pm
Cant help with those and I doubt you will find anything second hand.
March 25th, 2023 at 8:20 pm
Hi, looking for both pillion pegs, brackets plus handlebar mounts for 2007 Triumph Tiger 1050.
March 26th, 2023 at 9:10 am
Hi Graham. I cant help with the pillion footpegs and hangers, but I do have a pair of handlebar risers/clamps in stock at $60/pair. If you’d like further details please email me at goodpartsnz@gmail.com
March 28th, 2023 at 4:38 pm
Hi, I’m after a couple of things for 2 different bikes,
1983 suzuki a100, need chain guard
1981 ” B100 barrel with good exhaust port, I mean it has good threads. Yes I know…. hens teeth but doesn’t hurt to ask.
March 28th, 2023 at 8:35 pm
Hi. I cant help with the chain guard, but I just may be able to help with the B100 barrel. Please email me at goodpartsnz@gmail.com and I will have a look tomorrow for you.
March 29th, 2023 at 12:57 am
Hey guys, 95 RM 250, do yous have a kickstart and a right hand radiator ,iv been push starting for over a year, what a beast, anything would help a,
March 29th, 2023 at 8:36 am
Sorry I only deal in road model parts.
April 6th, 2023 at 5:41 am
Hi I’m looking 4 gt650r cam chain tensioner s please if so how much
April 6th, 2023 at 9:40 am
Hi Tony,
I should have these in stock. Please email me at goodpartsnz@gmail.com and I can then send a photo to make sure the parts are the ones you are looking for.
April 7th, 2023 at 3:56 pm
Hi team I’m looking for bmw engine parts ,the model is bmw 650gs /Dakar 2000 I’m looking for starter clutch, idler gears etc Rotax motor.
Please give me a call on 02108771366 Brad
Or , brad.mcdade12@gmail.com
April 7th, 2023 at 4:01 pm
Sorry nothing in stock for that model.
April 10th, 2023 at 9:10 pm
Later model Suzuki C90 Boulevard parts?
April 11th, 2023 at 9:51 am
I have some parts (although not a great deal) from a 2007 VL1500. What parts are you looking for.
April 14th, 2023 at 2:43 pm
Hi, I am after a VTR250 2002 rear break master cylinder allen key mounting bolt that holds the master cylinder to the frame, the bottom one of the 2… (the one above the rear break foot pedal) please email reply
cheers
April 14th, 2023 at 4:56 pm
Hi Bryan, The tow allen head bolts that secure the rear master cylinder to the frame are just standard allen head bolts. I often keep these with the master cylinder so should have a couple in stock. Just email me at goodpartsnz@gmail.com and I will see what I can do. Cheers Simon
April 23rd, 2023 at 10:29 pm
Hi do you have a couple of coils and leads for a 1987 kawasaki gpz750
April 24th, 2023 at 9:53 am
Hi Mathew. Nothing in stock for that model, but I do have a pair of coils with leads and plug caps from a GTR1000 which are likely to be the same. If you email me at goodpartsnz@gmail.com I can provide further details including photos.
May 18th, 2023 at 7:58 am
Good morning
Requiring parts for a 95 rf400r vc model what do you have available
May 18th, 2023 at 9:14 am
Sorry nothing in stock for that model.
May 26th, 2023 at 2:00 pm
Hi Do you have some rims for a cbr1000rr please
May 26th, 2023 at 2:09 pm
Sorry no
June 11th, 2023 at 9:56 am
Hi there I’m looking for a Kawasaki zephyr tank early nineties with flat knees bits on it
June 11th, 2023 at 5:54 pm
Sorry I cant help with that one.
June 17th, 2023 at 9:17 pm
Hi I’m looking for a front left and right indicators for a 2011 hyosung gt250r
June 18th, 2023 at 10:45 am
Sorry I cant help with those.
July 4th, 2023 at 11:54 am
Hi I was wondering if you have any parts for a 2010 triumph Daytona?
cheers Tim
July 4th, 2023 at 11:57 am
Sorry no
July 7th, 2023 at 10:13 pm
Hi
I’m looking for a g650gs front and rear wheel mud guards.
Thanks
July 8th, 2023 at 10:31 am
Sorry no parts in stock for that model.
July 11th, 2023 at 5:03 pm
Hey looking for a negative battery wire for a 1999 Yamaha virago xv250? Cheers in advance!
July 11th, 2023 at 7:28 pm
Sorry I cany help with that one. An Auto electrical shop should be able to make one up for you.
July 24th, 2023 at 5:18 pm
hey do you have a 2016 dr-z250 airbox cover, preferably in yellow
July 25th, 2023 at 9:52 am
Sorry no DRZ parts in stock.
August 1st, 2023 at 8:36 pm
Hi. Do you guys have an exhaust for Suzuki uz50 Lets 4.
August 2nd, 2023 at 9:49 am
Sorry no scooter parts.
August 14th, 2023 at 10:35 am
Hi I was wondering if you buy crashed motor bikes ? I have a Drz 400 it needs repairs to run .
August 14th, 2023 at 10:58 am
Hi. not a model I generally deal in, but you are welcome to send me some details including photos to goodpartsnz@gmail.com Cheers Simon
August 20th, 2023 at 3:28 pm
Hi, do you have a tank for a M109r?
August 20th, 2023 at 7:19 pm
Sorry no
August 28th, 2023 at 12:57 pm
HI Simon, Paul Coutts here I have a R1150RT BMW 2003 I need the plastic duct that clips under air filter cover and crosses over in front of battery. Could do P.O.A for me please. Regards Cooder 0276863477
August 28th, 2023 at 1:14 pm
HI Paul. I think I have this, but can you email me at goodpartsnz@gmail.com and I can then reply with photos, to make sure its the part you need. Cheers Simon.
August 28th, 2023 at 1:21 pm
Hi Simon I’m looking for POA on air cleaner intake duct that clips into air cleaner and runs in front of the battery for BMW R1150RT 2003 . Regards Paul Coutts
November 21st, 2023 at 10:52 pm
Hey mate, just wondering if you’ve got a seat for a 1999 Honda CMX250 in decent condition? Looking for a set of pipes too if you’ve got some?
Cheers,
Riley
November 22nd, 2023 at 8:42 pm
Sorry I cant help with that one.
November 23rd, 2023 at 9:05 pm
Hello , I’m after some Gl 1200 inner fairing parts , i just got the bike andvit would be great to get her back to life :),Even the stereo head deck and some other bits and pieces, Mine is an 86 . Is it easier I take photos and send via email ?
November 24th, 2023 at 8:44 am
Hi Marc. I may be able to help with some L1200 parts. my email is goodpartsnz@gmail.com Cheers Simon
December 8th, 2023 at 10:11 am
Hi there I’m looking for a tail light for a cbr1000rr 2008
December 9th, 2023 at 11:45 am
Sorry I cant help with that one.
December 10th, 2023 at 4:55 pm
Hi. After lower triple clamp, front and rear axles and spaces for the k4 gszr1000? thanks
January 14th, 2024 at 8:45 pm
Hi, I’m after an Instrument cluster, speedo cable and front master brake master cylinder for a VF400F 1983/4 Honda.
Thanks
January 15th, 2024 at 5:27 pm
Hi David. I have a dash assembly still on a semi complete VF400F and possibly a front brake master cylinder. If you email me at goodpartsnz@gmail.com I can provide further details including photos. Cheers Simon.
March 1st, 2024 at 2:45 pm
Hi there, I’m after a number plate light for a 2013 Suzuki LS650, do you have one?
Cheers
Mike
March 1st, 2024 at 7:44 pm
Sorry I cant help with that one
March 7th, 2024 at 10:09 pm
after 05 cbr1000rr rh mid fairing an may be head fairing
March 9th, 2024 at 3:40 pm
Sorry I cant help with parts from that model.
March 27th, 2024 at 12:23 pm
hi I’m looking for a backwheel for a 2002 drz 400 in good condition can you help ?
March 27th, 2024 at 12:54 pm
Sorry no DRZ parts in stock.
April 6th, 2024 at 2:44 pm
I am after some parts for 1987 VFR400 NC24. Can you send me an email address I can contact you on?
Gordon
April 6th, 2024 at 5:12 pm
Hio Gordon. Very few NC24 parts remaining in stock. my email is goodpartsnz@gmail.com