Below is a list of Suzuki motorcycle models currently in stock. Some models may have all the motorcycle parts available, some may only have a few parts left.
Email us on goodpartsnz(at)gmail(dot)com for any enquiries. We ship anywhere in New Zealand, Australia and other international destinations
Suzuki Motorcycles
| Make | Model | Year |
| Suzuki | GSXR250 | 1987-90 |
| Suzuki | GSX250L | 1980 |
| Suzuki | Cavalcade | 1986 |
| Suzuki | GN250 | 1986-2007 |
| Suzuki | GSXR400 | 1985 |
| Suzuki | RG250 | 1982-1986 |
| Suzuki | GSX400F | 1982 |
| Suzuki | Impulse | 1987 |
| Suzuki | GS450 | 1980 |
| Suzuki | GSX400E | 1987 |
| Suzuki | GS500E | 1990-1997 |
| Suzuki | GSX250 Invader | 2003 |
| Suzuki | Katana 750 | 1983 |
| Suzuki | GSXR250 | 1989 |
| Suzuki | GSX750ESG | 1989 |
| Suzuki | Impulse SX | 1987 |
| Suzuki | GSX600F | 1990 |
| Suzuki | GS750 | 1978 |
| Suzuki | GSX400E | 1982 |
| Suzuki | GN250 | 2006 |
| Suzuki | GSX1400 | 2001 |
| Suzuki | GSF Bandit 250 | 1997 |
| Suzuki | GSXR750 | 1986 -1987 |
| Suzuki | RF900 | 1995-2000 |
| Suzuki | GSX1100F | 1987 |
| Suzuki | GSXR1100W | 1995-1999 |
| Suzuki | GSF1200S Bandit | 2001 |
| Suzuki | GSX250 Across | 1990 |
| Suzuki | GS550 | 1979 |
| Suzuki | VS700 | 1988 |
| Suzuki | GSXR1100L | 1989 |
| Suzuki | GSF250 Bandit | 1992 |
| Suzuki | RGV250 | 1989 |
| Suzuki | GSX250 Across | 1990 |
April 21st, 2011 at 12:24 pm
Hi, I was wondering if you have a head for a suzuki gn250?
Cheers, Iain
April 21st, 2011 at 9:43 pm
Hi Ian.
I think you have contacted me directly on this one, some time back. I did send you an email at the time, but have re-sent it this evening, in case you didnt get the original. I can supply a complete head from a low mileage 2005 GN250 at $250 including postage. Cheers Simon
May 8th, 2011 at 2:40 pm
hi i was just wondering if you had a swing arm for a 1990 bandit 250
thanks
May 8th, 2011 at 2:48 pm
can you please reply to my email?
May 22nd, 2011 at 8:05 pm
Hi,
I am looking for a stator rotor rect setup to make a very slim alt. GN 250 / 400 has a stator 102mm in dia which may work. I would like the cost of the three parts please other stators arround that size off other machines may also work for me. I need 30 + amps I am guessing that these are 18 pole and should exceed amps required.
Thanks
Allan
May 22nd, 2011 at 9:35 pm
Hi Allan.
I dont have a GN250 stator and rotor currently, but will measure up a couple of others as I think they be even smaller. I will email you direct with some details. Cheers Simon
June 14th, 2011 at 4:03 pm
Hi i’m lookin for a GN 250 engine to match an ’86 model, the original has been run dry/no oil so the pistons and suchlike have been completely trashed, maybe i just need a top end of the engine? Any help appreciated,
Cheers Lewin
June 14th, 2011 at 9:23 pm
Hi Lewin.
I have the perfect engine for you. I have a 2006 GN250 engine with a genuine 7000km on the clock. The bare engine is available minus the stator coils and rotor and the gear indicator sensor (yours will bolt straight on). The later engines will bolt straight into your earlier frame and are compatable with all earlier wiring and electrics. Email me at goodpartsnz@gmail.com and I can supply you more details including photos and pricing. Cheers Simon
June 15th, 2011 at 2:03 pm
Hi Simon, I’m looking for a R.H.S footpeg mounting plate for a RF900 ’95
I may also get a number of other parts if you have a RF in stock
June 15th, 2011 at 3:00 pm
Hi Jason. Sorry I dont have a RH footpeg hanger available for the RF900. I do have quite a few parts avaiolable from this model, but the RH Footpeg hangers have been sold. Please let me know what other parts you may require and I will help if I can. Cheers Simon
September 24th, 2011 at 10:33 pm
Hi im after Suzuki GSX 750 side cover for the points its a little round one with suzuki on it and a adjustable break lever if you have them? cheers
November 8th, 2011 at 11:52 am
hi do you have an exhaust management motor for a 2008 Suzuki
M109 Boulevard
November 13th, 2011 at 5:15 pm
Gidday do you have a gs1200ss 2004 caberrattor/s what sort of price
November 13th, 2011 at 8:22 pm
Sorry cant help with those currently.
December 6th, 2011 at 9:46 am
After an instrument assy on a GSF 250 1995, not too worried about exterior as long as instruments are still working. Even older model if they are somehow compatable. Thanks Shawn
December 11th, 2011 at 3:30 pm
Hay was wondering if us have a running gsxr250 engine
December 13th, 2011 at 6:08 pm
Hi Jim. Sorry nothing available currently. I have just got a 1989 GSXR250 in and while the engine starts ok, it smokes, so will need work. Cheers
December 11th, 2011 at 8:02 pm
Suzuki GSX400F 1982 hi just woundering if you have a good stator for this still cheers
December 13th, 2011 at 6:11 pm
Hi Scott,
I have a parts engine, but think the stator has been sold. Will check for you this week. email directly at goodpartsnz@gmail.com Cheers Simon
December 27th, 2011 at 9:24 am
2004 suzuki gsx 250 invader fairings the front and the left hand side. cheers
December 27th, 2011 at 8:56 pm
Hi Nick.
I have a GSX250 Invader in stock and think the LH side fairings are in good order. Front upper fairing is damaged, but cant recall if its repairable. These fairings are now quite hard to come by and are not available new from Suzuki any longer. I am about to head away on holday for a few days, but email me directly at goodpartsnz@gmail.com and i will get back to you with more details after I return. Cheers Simon
February 15th, 2012 at 11:55 am
Hi there – I see you have an 01 Bandit 1200S in stock – I am after an airbox, from top cover and bit that mounts onto the carbs. Can you oblige please????????